•Fitting material: Plastic.
•Lamp type: 1 x 0.5W bright white LED.
•Class: 2. Double insulated. Does not require earth connection.
•Protectionagainstelectricshock:
•IP Rating: IP20
•Voltage: AC 220 - 240V~50/60Hz rechargeable voltage transformer.
•MaximumAmbienttemperaturerange-20ºC-40ºC.
•Dimensions: (H)50mm x (W) 166mm x (D)50mm.
•Commercial/domesticuse.
•Indoor and outdoor use:(sports,hunting.Camping,shingetc.)
•Features /Functions: Switch
Charge indicator
Plugs directly into wall socket
•Battery: 4V 400mAh sealed lead-acid rechargeable battery
•Charge time: 20 - 24 hours
•Duration time: 2.5 hours
IMPORTANT:
•Pleasereadthismanualcarefullybeforeyoustartusingthisluminaireinfullcharge.
•Makesurethatthevoltageiscorrectbeforeplug-in.
•Rechargetheluminairewhenlightgoesdim.
•Whentheluminaireisusedfor3-4hourstheluminarewillrequireapproximately
12-15 hours to recharge.
•Turnofftheswitchwhentheluminaireisnotinuseorcharging.
•Theefciencymaydecreaseiftheluminaireisusedorchargedwhentemperatureis
below32F(0’C)orabove104F(40’C).
•Toavoiddamagetotheluminaire,pleasedonotuseanyotherspeciedbattery.
•Toavoidelectricalshock,pleasedonotopentheluminaireunlessbya
qualiedperson.
How to operate
•Pushtheswitchforward,thetorchison.
•Pushtheswitchbackward,thetorchisoff.
How to recharge
• Ensurethatthelampisturnedoffduringchargingtoprolongbatterylife.
• Makesurethevoltageiscorrectbeforechargingluminaire.
• Plugintothemainselectricalsupply.Thechargeindicatorlightwilllightuptoshow
that the luminaire is charging.
• Chargethelampperiodicallyforatleast8hourswhilenotinuseforover3monthsto
prolong the battery life.
H26 - attachments:
Iftheexternalexiblecableorcordofthisluminaireisdamaged,itshouldbeexclusively
replacedbythemanufacturerorhisserviceagentorasimilarqualiedpersoninorder
to avoid a hazard. To ensure that you get maximum longevity and maximum use out of
your luminaire, please observe the following safety instructions.
Electrical products can cause death, injury, or damage to property. Installation of
theluminairemustbecarriedoutbyaqualiedelectrician,inaccordance
withSANS10142.Oncompletionofinstallation,ensurethattheCerticateof
Compliance is updated.
•Beforeconnectingtheluminaire,ensurethatvoltageindicatedontheratinglabel
corresponds with the mains voltage in your home.
•Thisluminaireischeckedinfullforconformitytothequalitystandardsandsafety
requirements.
•Themanufacturer/supplierisnotresponsibleforanydamageofpropertiesand
persons, caused by the incorrect use or installation of the luminaire.
•Shouldyoubeunsureofhowtoinstallthisluminairecorrectly,pleaseconsulta
professional electrician or your supplier for assistance.
•Ensureallitems/components,threadsandscrewsaretightlysecured.
IMPORTANT:
•Tamperingwiththisluminaire-byusingsiliconsealersorincorrectcabling,will
invalidate your warranty.
•Whentheprotectionglass/shadeisdamaged,itshouldbereplacedimmediately.
The luminaire must not be used without the protection glass/shade.
•Pleasecheckwhethertheconnectionofthepowercordissafeandreliable
before installation.
•Ifyourmainswiringdiffersinanywayfromdiagram,consultaqualiedelectrician.
•Alwaysensurethatthepowersupplyvoltageiscorrect.
•Chokinghazard:Maycontainsmallparts.Keepawayfromchildren.
•Donotinsertyourngersoranypartofyourbodyintotheelectricalcontactand
sockets of this product whilst it is connected to the electrical supply.
•Itemmayvaryslightlyfromthepictureonthecarton.
•Coastalhumiditymayeffectthelongevityoftheluminaire.
•Toprotectthebatterylife,pleaserechargetheunitwhenthelightgoesdim.
SPECIFICATIONSIMPORTANTSAFEGUARDS
INSTALLATION