2. PROAIM
  3. P-RVMT-01

PROAIM P-RVMT-01 User manual

  • Hello! I've reviewed the Assembly Manual for the PROAIM Rapid VESA Monitor Mount P-RVMT-01. This document provides clear instructions on assembling the mount, attaching it to a monitor, and securing it to a stand. The mount features adjustable tilting and a handle for safe carriage. I'm ready to answer any questions about the setup and features described in this manual.
  • What is included in the package?
    How do I attach the mount to the monitor?
    What type of stand is compatible with the mount?
1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Rapid VESA 100mm Professional Producon
Adjustable/Tilng Monitor (P-RVMT-01)
Assembly Manua l
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
Rapid VESA Monitor Mount
4 x Allen bolts
2
Rapid VESA Monitor Mount Setup
• Posion the Rapid VESA Monitor Mount on
the 100mm Screen (Not Included).
• Match the threads of the Rapid VESA Moni-
tor Mount and the Monitor, and insert the
Allen bolt.
• Aer inserng the bolt, ghten it using the
3mm Allen key.
• Insert the remaining bolts using the same
process.
• Loosen the locking knob of the Rapid VESA
Monitor Mount and pull the Push Pin.
• The Rapid VESA Monitor Mount is aached to
the Monitor, as shown in the image.
• Aer pulling the Push Pin, lower the handle.
NOTE:- The Monitor Mount features a handle at
the back, which enables safe carriage of the
Monitor.
3
• To secure the setup, ghten the knob.
• Your Rapid VESA Monitor Mount is fully as-
sembled with the Monitor and the Stand.
NOTE:-The Monitor Mount allows you to quickly
adjust the Monitor’s posion per your require-
ment by lng it.
• Mount the Rapid VESA Monitor Mount on
a 5/8” Baby-Pin Stand.
NOTE:- The Monitor Mount is compable with a
5/8” Baby-Pin Stand and is designed to provide
opmal support for your Monitor in any seng,
whether in the studio, on set, or locaon.
(SHOWN WITH OPTIONAL ACCESSORIES)
YOUR RAPID VESA 100MM PROFESSIONAL PRODUCTION ADJUSTABLE/TILTING MONITOR
ALL DRESSED UP AND READY TO GO!
4
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.
/