Bissell Spot Clean Quick start guide

Bissell
Brand
Bissell
Model
Spot Clean
Category
Vacuum cleaners
Type
Quick start guide

This manual is also suitable for

SPOT
CLEAN
QUICK START GUIDE
PRODUCT PARTS
WARNING:
Refer to the enclosed user
guide for complete instructions
and important safety notices.
Carry Handle
Power Button
3” Tough
Stain Tool
Flex
Hose
Dirty
Water Tank
Formula
& Clean
Water Tank
Power Cord
Quick Release™
Cord Wrap
WE CAN’T WAIT TO
HEAR FROM YOU!
Rate this product and let us
(and millions of your closest
friends) know what you think!
Visit your retailer’s
website or www.bissell.com.
1. Hold the tool 1 inch above soiled surface and spray
trigger to apply cleaning formula.
2. Gently scrub the area with brush on tool.
3. Apply downward pressure to the tool and pull it
toward you to suction up the dirt and cleaning
formula. Continue until no more dirt can be removed.
©2012 BISSELL Homecare, Inc
Grand Rapids, Michigan
All rights reserved. Printed in China
Part Number 160-0585
Rev 10/12
For information about repairs or replacement
parts, or questions about your warranty, call:
BISSELL Consumer Care 1-800-237-7691
Monday – Friday 8 am - 10 pm ET
Saturday 9 am - 8 pm ET
Sunday 10 am - 7 pm ET
Or visit the BISSELL website www.bissell.com
QUICK PREP STEPS
ASSEMBLY
1. Unwrap hose and select desired tool.
Tool easily snaps onto hose.
2. Remove tank from tool side of unit. Pull on the
black tab to remove rubber stopper and reveal
tank opening.
3. Your tank is marked for a large stain or a small
stain. Based on your cleaning need, ll with hot
tap water to the water ll line. Add OXYgen
Boost to the OXYgen Boost ll line. Add BISSELL
2X formula to the formula ll line.
4. Replace rubber stopper, then replace the tank
on the machine.
5. Twist the quick release cord wrap to release the
cord, plug in, and you’re ready to spot clean!
GUIDELINES TO SPOT CLEAN
1. Slide ex hose clip into the opening on the front
of the machine until you hear a “snap.”
2. Snap the hose grip bracket into the back of
machine on the clean tank side. Wrap ex hose
around unit and snap hose grip into bracket.
3. Attach cord wrap by snapping it into place
on the dirty water tank side of the machine.
Wrap power cord around cord wrap.
BISSELL 2X Portable Machine Spot & Stain Formula
and OxyGen Boost Formula
CLEANING FORMULA
›› Always use genuine BISSELL portable deep cleaning
formulas. Non-BISSELL cleaning solutions may harm
the machine and will void the warranty.
  • Page 1 1
  • Page 2 2

Bissell Spot Clean Quick start guide

Bissell
Brand
Bissell
Model
Spot Clean
Category
Vacuum cleaners
Type
Quick start guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents