Quality has always been our driving force and founding

Argon Audio is a natural extension of this philosophy.

We have 20 years’ experience in creating and specifying

high quality products, manufacturing them and selling them

on to end users with Value-for-Money as the primary aim.

Please read this manual fully before unpacking and

We have during production and packing carefully checked

After unpacking please check for any damage from

outstanding performance way beyond the expectations of a

product at this price point. Excellent build quality, reliability

and ease of use combine to make a product which if used

correctly will offer you a lifetime of musical enjoyment.

Omitting all the usual gimmicks allows us to concentrate the

manufacturing costs on the high quality parts necessary to

use of high quality components ensure that your amplifier

should last for many years. Argon DA2V2 is one of very few

true full digital stereo amplifiers on the market. Besides the

amplification being done by a power full digital 2X50 watt

analogue connection (just in case ). DA2V2 is as “future

proof” as it gets at this time and you can basically connect

any audio source, digitally.

We recommend that you read the manual of your other

Please switch off all equipment when connecting your

The binding posts on the loudspeaker terminal accepts wire

up to Ø 4mm or cables with banana plugs.

Make sure that positive terminal binding posts on the

requires dusting or cleaning with a damp soft cloth

Restriction of Hazardous Substances (RoHS) in electrical

and electronic equipment and the disposal of Waste.

before cleaning. Place the unit on a solid surface. Do not

block any ventilation openings. Do not put it in a closed

bookcase or a cabinet that may keep air from flowing

through its ventilation openings. Do not install near any heat

sources, such as radiators, heat registers, stoves or other

appliances that produce heat. Protect the power cord from

being walked on or pinched, particularly at plugs and the

point where they exit from the product. Servicing is required

when the product has been damaged. Do not attempt to

source with

(type B USB plug)

that also can control Argon iNet6+ which is an

Internet tuner in same family as DA2.

The section with the white square around is

dedicated to DA2, as well as the Red Power

If DA2 is connected with a Argon iNet6+ they

have to be connected only by Optical digital

RCA the volume function on the remote will not

work properly.

Your subwoofer need to have input for one RCA plug just like there is only one RCA output plug from the DA2V2.

Connect using this single RCA plug at both ends.

Your Subwoofer might have a Left and Right input. In this case you can choose between two options:

Option 1 is to use one single RCA connection on the subwoofer and you can choose either L or R input and leave the other one

Option 2 is to get a cable with one RCA plug at one end for connection to DA2V2 and two RCA (L and R) at the other end for

connecting to the Subwoofer.

Your Argon DA2V2 is equipped with 1 analogue audio input.

The analogue input is of the left/right RCA type.

You simply connect the left/right RCA plugs to the corresponding plugs on ex. your CD player (if it doesn’t have digital output)

You can also use this connection for analogue sound out from a TV.

(like Argon iNet6+). Take a look at the back side of your audio source product and see what kind of digital output it has.

Your Argon DA2V2 is uniquely equipped with a USB Audio Digital input

A USB Audio Digital input means that you can connect a PC and directly play digital audio content from the PC.

Conversion of the signal from digital to analogue would normally happen in the PC, but often the D/A conversion quality in PC’s