The Collection by Argos 2442824 User manual

2442824
Brand
The Collection by Argos
Model
2442824
Type
User manual

This manual is also suitable for

The Collection by Argos 2442824 is a sturdy and comfortable chair designed to provide long-lasting support. Crafted from high-quality materials, it features a walnut finish that adds a touch of elegance to any room. With its ergonomic design, this chair promotes good posture and reduces strain, making it ideal for both work and relaxation. The chair's adjustable height and swivel mechanism allow for customized comfort, while its sturdy construction ensures stability and durability. Assembly is simple and straightforward, requiring minimal tools and effort.

The Collection by Argos 2442824 is a sturdy and comfortable chair designed to provide long-lasting support. Crafted from high-quality materials, it features a walnut finish that adds a touch of elegance to any room. With its ergonomic design, this chair promotes good posture and reduces strain, making it ideal for both work and relaxation. The chair's adjustable height and swivel mechanism allow for customized comfort, while its sturdy construction ensures stability and durability. Assembly is simple and straightforward, requiring minimal tools and effort.

Width - 45cm
Depth - 56cm
Height - 93cm
Important – Please read these instructions fully before starting assembly
Customer Helpline: 0345 640 0800
Assembly Instructions - Please keep for future reference
Dimensions
Issue 1 - 5/05/14
Adaline Walnut Chair
If you need help or have damaged or missing parts, call the
7
c:
d:
c:
After the sitting test,
re - tighten bolts again,
if any adjustment needed.
d:
It is highly recommend
to re - tighten all the bolts
again after using the chair
for 7 days.
Note : Please keep the
allen key to re - tighten
all bolts again when
required.
If you need help or have damaged or missing parts, call the Customer Helpline: 0345 640 0800
Assembly is complete.
Assembly Instructions
244/2824
408/7524
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
Care and maintenance
1
• Check you have all the
components and tools listed on
page 2 and 3.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product during assembly,
this could cause damage.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• Dispose of all packaging
carefully and responsibly.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
• Maximum safe weight of
user: 110 Kgs.
6
Step 2
Note : Stand the chair on
a level floor.
b:
a:
Tightly screw all bolts.
Sit on the chair to
level the legs.
b:
Assembly Instructions
a:
Note : Step 2 is essential
to prevent the chair from
wobbling caused by
uneven legs.
• To reduce
the likelihood of
damaging your
product please
ensure that your
power drill is set on a low torque
setting.
Handy Hints
• Assemble all parts and bolts
loosely during assembly, only
once the product is complete
should you fully tighten the bolts.
• Reguraly check and ensure
that all bolts and fittings are
tightend properly.
• Assemble the item as close
to its final position (in the same
room) as possible.
• Do not stand on the chair.
• Do not use the chair as step
ladder
2
Assembly Instructions
5
Components - Parts
Please check you have all the parts listed below
Chair back x 1
Seat x 1
If you have damaged or missing components,
call the
Customer Helpline: 0345 640 0800
1
2
Leg x 2
3
c:
Do not fully tighten.
A
B
C
1
Turn over the chair.
Put legs into front
corners of the seat
frame . Insert bolts
with spring washers
and washers into each
of the 2 holes in the front
corners. Tighten bolts
with allen key .
A
B
C
E
3
2
c:
2
3
3
2
Note :The quantities below are the correct amount to complete the assembly of 1 chair.
Components -
Fittings
Please check you have all the fittings listed below
Note :The quantities below are the correct amount to complete the assembly of 1 chair. In some cases more
fittings may be supplied than are required.
C
Spring washer x 8
D
E
Washer x 8
Allen key x 1
A
3
B
Bolt x 8
Wooden dowel x 2
Assembly Instructions
4
Step 1
a:
b:
D
2
a:
Insert wooden dowels
into each centre hole
in the back of the seat
.
2
D
Insert bolts
with spring washers
and washers through
the holes at the back of
the seat into the
chair back . Tighten
bolts with allen key .
Do not fully tighten.
A
B
b:
1
C
2
E
A
B
C
2
1
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

The Collection by Argos 2442824 User manual

2442824
Brand
The Collection by Argos
Model
2442824
Type
User manual
This manual is also suitable for

The Collection by Argos 2442824 is a sturdy and comfortable chair designed to provide long-lasting support. Crafted from high-quality materials, it features a walnut finish that adds a touch of elegance to any room. With its ergonomic design, this chair promotes good posture and reduces strain, making it ideal for both work and relaxation. The chair's adjustable height and swivel mechanism allow for customized comfort, while its sturdy construction ensures stability and durability. Assembly is simple and straightforward, requiring minimal tools and effort.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents