HANYOUNG NUX BA1 Owner's manual

  • Hello! I have read the user manual for the HANYOUNGNUX BA1 Digital panelmeter. This manual provides comprehensive information about the device's safety precautions, measurement ranges, specifications, and connection instructions. It also details the various input signal types it can handle. I am ready to assist you with any questions you may have about this device.
  • What power supply voltages are supported?
    What are the operating temperature limits?
    What signal types can this device measure?
    What is the warranty period for this product?
•Iftheuserusetheproductwithmethodsotherthanspecifiedbythemanufacturer,there
maybebodilyinjuriesorpropertydamages.
•To prevent electric shock or equipment failure, please do not turn on the power until
completingwiring.
•Neverdisassemble,modify,orrepairtheproduct.Thereisapossibilityofamalfunction,
anelectricshock,orariskoffire.
•Pleaseturnoffthepowerwhenmounting/dismountingoftheproduct.Thisisacauseof
anelectricshock,amalfunction,orfailure.
•Topreventdamageorfailureofthisproduct,pleasesupplytheratedpowervoltage.
Since this is not explosion-proof structure,pleasedonot use in a place where
combustibleorexplosivegasisaround.
•Sincethereisapossibilityofanelectricshock,pleaseusetheproductasmountedona
panelwhilethepowerisbeingsupplied.
WARNING
CAUTION
Specification
Powersupplyvoltage
5Vd.c. 12-24Vd.c.
Powerconsumption
Approx.3W Approx.5W
Insulationresistance
10min(500Vd.c.)
Dielectricstrenght 1,500VACfor1min(powerterminal-inputterminal)
Noiseresistance Powersupplyterminalnormalmode±200V
Powersupplyterminalcommonmode±500V
Vibration
durability
10-55㎐Peakamplitudefor2hourseachinX,Y,Zdirections
Shock
durability
300(Approx30G)
Ambienttemperature
0~50℃
Ambienthumidity 35~85%RH
Storagetemperature
-10~70℃
Measurementrange
DCvoltage
DCvoltage
DCcurrent
DCcurrent
Model
Measurementrange
Resolvingpower Inputimpedance
Maxallowableinput
voltage
BA1-ND10-1 199.910010070V
BA1-ND10-2 1.999V11100V
BA1-ND10-3 19.99V101250V
BA1-ND10-4 199.9V10010300V
Model
Input Displayrange Inputimpedance
Maxallowableinput
voltage
BA1-ND11-1
1-5VDC
50.0 100100V
BA1-ND11-2 100.0 100100V
BA1-ND11-3 199.9 100100V
Model
Input Displayrange Inputimpedance
Maxallowableinput
current
BA1-ND21-1
4-20DC
50.0 25Ω150
BA1-ND21-2 100.0 50Ω150
BA1-ND21-3 199.9 100Ω150
Model
Measurementrange
Resolvingpower Inputimpedance
Maxallowableinput
current
BA1-ND20-1 199.90.111
BA1-ND20-2 1.9991100Ω50
BA1-ND20-3 19.991010Ω150
BA1-ND20-4 199.9100 1Ω300
BA1-ND20-5 1.999A1
Useshunt
(secondaryvoltage50)
BA1-ND20-6 19.99A10
BA1-ND20-7 199.9A100
BA1-ND20-8 1999A1A
Accuracy:±0.2%ofindicationvalue±1digit(23℃±5℃)
Accuracy:±0.2%ofindicationvalue±1digit(23℃±5℃)
Accuracy:±0.2%ofindicationvalue±1digit(23℃±5℃)
Accuracy:±0.2%ofindicationvalue±1digit(23℃±5℃)
•Thecontentsoftheinstructionmanualaresubjectivetochangewithoutpriornotice.
•Pleasemakesurethatthespecificationisthesameaswhatyouhaveordered.
•Pleasemakesurethattheproductisnotdamagedduringshipping.
•Pleaseusethisproductinaplacewherecorrosivegas(suchasharmfulgas,ammonia,
etc.)andflammablegasdonotoccur.
•Pleaseusethisproductinaplacewherethereisnodirectvibrationandalargephysical
impacttotheproduct.
•Pleaseusethisproductinaplacewherethereisnowater,oil,chemicals,steam,dust,
salt,ironorothers(Contaminationclass1or2).
•Pleasedonotwipethisproductwithorganicsolventssuchasalcohol,benzeneand
others.(Pleaseusemilddetergent)
•Pleaseavoidplaceswhereexcessiveamountsofinductiveinterferenceandelectrostatic
andmagneticnoiseoccur.
•Pleaseavoidplaceswhereheataccumulationoccursduetodirectsunlightorradiantheat.
•Pleaseusethisproductinaplacewheretheelevationisbelow2,000m.
•Pleasemakesuretoinspecttheproductifexposedtowatersincethereisapossibilityof
anelectricleakageorariskoffire.
•Itiseffectiveagainstnoiseifmakingthepowerlinesoftheproductthetwistedpairwiring.
•Pleasedonotconnectanythingtotheunusedterminals.
•Pleaseconnectwiresproperlyaftermakingsurethepolarityofterminal.
•Pleaseinstallaswitchorbreakneartheoperatortofacilitateitsoperation.
•Writedownonalabelthattheoperationofcircuitbreakerorswitchdisconnectsthepower
sincethedeviseisinstalled.
•Inordertousethisproductproperlyandsafely,werecommendperiodicmaintenance.
•Somepartsofthisproducthavelimitedexpectedlifespanandageddeterioration.
•Thewarrantyofthisproduct(includingaccessories)is1yearonlywhenitisusedforthe
purposeitwasintendedundernormalcondition.
 Digitalpanelmeter
BA1
ThankyouforpurchasingHANYOUNGproduct.
Pleasecheckwhethertheproductistheexactlysameasyouordered.
Beforeusingtheproduct,pleasereadthisinstructionmanualcarefully.
Pleasekeepthismanualwhereyoucanviewatanytime
INSTRUCTIONMANUAL
MF0204KE230629
HANYOUNGNUX CO.,LTD
HEADOFFICE
28,Gilpa-ro71beon-gil,Michuhol-gu,Incheon,Korea
TEL:+82-32-876-4697
http://www.hanyoungnux.com
Donottouchorcontacttheinput/outputterminalsbecauseitmay
causeelectricshock.
DANGER
Safetyinformation
Beforeusingtheproduct,please readthe safetyinformationthoroughlyand use it properly.Alerts
declaredinthemanualareclassifiedtoDanger,WarningandCautionbytheircriticality
DANGERindicatesanimminentlyhazardoussituation
which,ifnotavoided,willresultindeathorseriousinjury
WARNINGindicatesapotentiallyhazardoussituation
which,ifnotavoided,couldresultindeathorserious
injury
CAUTIONindicatesapotentiallyhazardoussituation
which,ifnotavoided,mayresultinminorormoderate
injury
DANGER
WARNING
CAUTION
Suffixcode
Model
Code Description
BA1- - - miniDCindicator48(W)×24(H)㎜
Output N instructiononly
Input D
10 DCvoltage(voltmeter)
20 DCcurrent(ammeter)
11 DCvoltmeter(1-5VDC)
21 DCammeter(4-20DC)
Rangecode 1~8 Refertothemeasurementrangecode
Powersupplyvoltage -Noindication:5Vd.c.
A12-24Vd.c.
Function
Connectiondiagram
Dimensionsandpannelcutout
Selectdecimalposition
Repairandinspection
AfterService
Powersupplyconnection
Digital
Panelmeter
Twinshieldcable
Input
<Figure1>
<Figure2>
Input Digital
Panelmeter Motivepower
●Pleaseusethebacksideterminalfordecimalpositionselection.
●Whenturningon1.999decimalpoint,pleaseconnecttoterminalnumber
7(COM)andnumber4terminalwhicharecommonterminalsofdecimal
point.
•Pleasekeepthedeviceunderthe60%humiditywithinthetemperature
-10to+70.Pleasegetridofthedustwhenusingitinthedustyplaces.
(Themachine'slifeisshortenedduetohightemperatureofcomponents
inthedevice).
•Pleasebecautiousnottotouchthinnerandvolatileoilsincethis
instrument'scaseismoldedplastic.
Thisproductisreleasedoutafterproduction,testing,andexamination
throughastrictqualitycontrol.Ifithasbrokendown,pleasecontactthe
dealerorourheadquartersdirectly.(Pleasesendthedefectiveproductwith
thedetailedinformationaboutit.)
[Unit:㎜]
•Forinputsignal(directvoltageor4-20mAd.c.or1-5Vd.c.),
pleaseconnecttoterminalnumber8andterminalnumber10.
•Fortheconnectionwireusetwopiecesofshieldwireandconnectshield
toterminalnumber8.(Refertofigure2)
•Connectpowertothepowerterminal.
•Connect"+"tonumber1terminaland"-"tonumber2terminalforpower
5Vd.c.Usethepowerwithin±5%of5Vd.c.
•Evenusingthepreventiondeviceagainstnoisedependingonthetypes,
itisverydifficulttoequiptheabsolutepreventiondevicetosuchasmall
equipmentlikeadigitalpanelmeter.
Input'sconnection
※WhenusingmorethanoneBA1,pleaseuseseparatepowersupply.
Pleasebecautiousthatandterminalsareinternallyshort.
<Figure1>IncaseyouuseSMPS.
ThisnoiseproblemdoesnothappenwithallSMPS,butiftherequirements
arenotmet,youcanseetheeffectbyaddingthecondensertothedriving
powersource,asbelow.
●
Dimensions
●
Panelcutout
Inputsignal Voltage,current,currentloop(4-20d.c.or1-5Vd.c.)
A/Dconversiontype Duplexintegraltype
Samplingcycle 300
Responsespeed Approx.2sec(maxrange)
Maxdisplayabledigit ±1999
Displayingpart 7segmentsLED
Decimalpoint
indication
10¹,10²and10³indicationbythebacksideterminalconnection
Polarityindication Display“-”automaticallywheninputsignalisopposite.
Indicationwhen
rangeisexceeded Indicatewith
Indicationwhen
rangeisshort Indicatewith
DCsignalinput
/