freescale Elerometer Prototype User guide

Type
User guide

Freescale Accelerometer Prototype is a versatile tool for exploring the world of motion sensing. With its 3-axis accelerometer, you can measure acceleration in all directions. Use it for a variety of projects, including robotics, gaming, or fitness tracking. The board is easy to use, with simple power and data connections. It's also compatible with other Sensor Toolbox kits, so you can expand your projects as your skills grow. Get started today and see what you can create!

Freescale Accelerometer Prototype is a versatile tool for exploring the world of motion sensing. With its 3-axis accelerometer, you can measure acceleration in all directions. Use it for a variety of projects, including robotics, gaming, or fitness tracking. The board is easy to use, with simple power and data connections. It's also compatible with other Sensor Toolbox kits, so you can expand your projects as your skills grow. Get started today and see what you can create!

Unpack the board.
Verify package contents
according to the kit Web
site: www.freescale.com/
sensortoolbox
Connect the accelerometer development
board to the accelerometer prototype
board. More information can be found on
the Web site. The user has two choices
for sourcing power:
1. Solder wire for 3.3 V power to any of
the through hole 3.3 V inputs, solder
a wire for ground to through hole
locations marked “GND” (see picture
of PCB silkscreen).
2. Solder a wire for regulator input
(4 to 20V DC) to through hole location
Vcc, pin 36. Note that the through
holes marked “3.3V” will be 100 mA
sources. When supplying power
this way, solder a wire for ground to
through hole locations marked “GND”
(see picture of PCB silkscreen).
At www.freescale.com/
sensortoolbox download
the latest software version by
clicking:
All Sensor Toolbox kits use the same
software and driver, so the install only
needs to be done once. Follow the
on-screen instructions to install the
communication driver for the tool. Check
back occasionally for software updates.
Turn the accelerometer
development board on
using the power switch. When
data collection is complete,
switch the board off using the
power switch.
Explore other compatible kits at
www.freescale.com/sensortoolbox
LFSTPROTO Quick Start Guide
SENSOR TOOLBOX
Accelerometer Prototype Board
STEP
1
STEP
3
STEP
2
Downloaded from Arrow.com.
Accelerometer Prototype Board
SENSOR TOOLBOX
Freescale and the Freescale logo are trademarks or registered
trademarks of Freescale Semiconductor, Inc. in the U.S. and other
countries. All other product or service names are the property of
their respective owners. © Freescale Semiconductor, Inc. 2010.
Doc Number: LFSTBPROTOQSG / REV 0
Agile Number: 926-78484 / REV A
Learn more at www.freescale.com/sensortoolbox.
LEDG-BB
DIS-MCU
G-SEL-1#
EXTRA A/D
MISO
RXD
PTD3
PTD0
LED-OB
G-SEL-2#
PTB6
Y-OUT# PTB7#
PTD2
SS/NVM
BKGD
TXD
G-SEL-2
RESET
MOSI/NVM
PTB6#
SLEEP#
G-SEL-1
X-OUT#
Y-OUT
PUSH BUTTON
Z-OUT
PTB7
PTD1
LEDR-BB
LEDB-BB
SLEEP
Z-OUT#
SPSCK/NVM
BUZZER-BB
AV DD
X-OUT
P3_3V
VCC
P2 CONN PLUG 6x2
1
3
5
7
9
11
2
4
6
8
10
12
TP1
testpoint
P1 CONN PLUG 18x2
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
Downloaded from Arrow.com.Downloaded from Arrow.com.
  • Page 1 1
  • Page 2 2

freescale Elerometer Prototype User guide

Type
User guide

Freescale Accelerometer Prototype is a versatile tool for exploring the world of motion sensing. With its 3-axis accelerometer, you can measure acceleration in all directions. Use it for a variety of projects, including robotics, gaming, or fitness tracking. The board is easy to use, with simple power and data connections. It's also compatible with other Sensor Toolbox kits, so you can expand your projects as your skills grow. Get started today and see what you can create!

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI