Samsung RT16A6195SR User manual

Type
User manual
WIDTH
(FITS 29" OPENING)
275/8
"
HEIGHT
WITH
HINGE
667/8"
15.6 cu. ft. Top Freezer Refrigerator
MODEL RT16A6195SR DIMENSIONS
Be sure your new fridge will fit
Don't wait until delivery to be sure your new refrigerator will t – both
in your kitchen and through all doorways. This guide includes all pertinent
measurements and clearances so you can buy with condence.
DEPTH
TO DOOR
291/4
"
Measure height
including flooring.
Be sure to allow for
hinge clearance
height if needed.
Measure width
including countertop
overhang.
Measure depth
including molding
or trim.
Walk the delivery route
3Identify the narrowest opening that the appliance will travel, from outside the home to the location where it will be installed.
3Appliance depth or width must be smaller than the width of the narrowest opening.
Standard-Depth Refrigerator
Standard-depth refrigerators typically measure 30 to 35 inches in depth,
as opposed to counter-depth refrigerators that sit ush with cabinetry.
Installation clearances
3Allow a 2" minimum clearance when installing
along a wall. This will allow for the door to open
a full 90 degrees.
3Allow a 2" minimum clearance at rear for proper
air circulation and water/electrical connections.
3Allow a 2" minimum clearance at sides and top
for ease of installation.
For optimal usage and ability to open refrigerator doors
completely, do not install next to a wall.
Please note: The above dimension and cutout information is for planning
purposes only. For complete installation details, consult manual packed
with product or download manual online at samsung.com.
115°
(Freezer)
120°
(Fridge)
415/8"
DEPTH
WITH D00R
OPEN 90°
543/8"
2"
2" 2"
TOP OF FREEZER/REFRIGERATOR WITH DOORS OPEN 115°/120°
  • Page 1 1

Samsung RT16A6195SR User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI