2. Sprout
  3. SBTHP200BBK
SBTHP200BBK

Sprout SBTHP200BBK User manual

  • Hello! I've reviewed the user manual for the Sprout Stride TWS Earbuds and am ready to help you with any questions you might have. This document covers features like Bluetooth pairing, controls, and also active ear hooks. It outlines operation instructions, charging information, and important safety precautions.
  • How do I turn the earbuds on?
    How do I pair the earbuds with my device?
    How can I reset the earbuds?
Sprout Accessories Pty Ltd
Ph: 07 3624 6666 W: Sproutinc.com.au
E: [email protected]
Stride TWS
Bluetooth Earbuds
INSTRUCTION MANUAL
Sprout is proud to be an
Australian owned brand. Starting
small in 2011, we are now one
of the largest single-branded
accessory providers in Australia.
We have an extensive range
that highlights our pursuit of
innovation across a growing
number of technology categories.
Our mission is to inspire new and
better experiences, by designing
products that enhance your
digital life.
01. WHAT’S IN THE BOX? 04
02. PRODUCT OVERVIEW 05
03. QUICK START GUIDE 06
04. TROUBLESHOOTING 11
05. SPECIFICATIONS 12
06. CARE AND MAINTENANCE 13
07. IMPORTANT SAFETY INFO 13
08. CONSUMER GUARANTEE 15
CONTENT
03
Scan the QR code
to access an online
version of this manual
What’s in the box?
1x Stride True Wireless earbud (Stride I)
1x Stride True Wireless earbud (Stride II)
1x Charging case
1x Charging cable
1x User manual
1x A pair of smaller rubber earbuds
2x Active ear hooks
Thank you for purchasing the
Stride TWS True Wireless Earbuds.
For optimum performance and safety,
please read instructions carefully before usage.
Please keep this manual for future reference.
01.
04
Stride TWS I
Bluetooth Pairing Request
“Headset” would like to
pair with your iPhone
Cancel
PPaaiirr
Pair
Stride TWS I
Bluetooth Pairing Request
“Headset” would like to
pair with your iPhone
Cancel
PPaaiirr
Pair
Stride TWS I
Bluetooth Pairing Request
“Headset” would like to
pair with your iPhone
Cancel
PPaaiirr
Pair
<25%
25%-50%
可旋转15
L R
Product Overview
02.
1. Multifunction buttons
(Sprout leaf logo)
2. Microphone
3. USB Type-C charging port
4. Earbuds indicator
light (same hole as
microphone)
5. Charging case battery
level indicator
6. Charging contact
7. Active ear hooks
8. Wireless charging
contact
8
1
6 6
2 & 4
7
5 3
05
Quick Start Guide
03.
First use of earbuds
Place the two earbuds into the charging case and
then fully charge the case and earbuds before first
use. The recommended charging time is 1-2 hours.
Turn on/off
1. The earbuds will turn on automatically when taken
out of the charging case. To manually turn on,
press and hold the multifunction button on both
earbuds for 3 seconds.
2. The earbuds will turn off automatically when
placed back in the charging case with the lid
closed*.To manually turn off, press and hold the
multifunction button on both earbuds for
5 seconds.
*If you place earbuds in case and leave lid open,
they will remain connected to the paired device for
5 minutes before turning off.
Automatic pairing first time
The Stride TWS’s Bluetooth pairing will start
automatically when turned on for the first time.
Stride TWS will remember the last device
paired and if the device is within Bluetooth
range, Stride TWS will automatically
search and pair with the device.
06
<25%
25%-50%
可旋转15
L R
Quick Start Guide
03.
Manual Bluetooth pairing
1. True Wireless stereo connection (earbud to earbud)
• LED flashing blue (both sides) –
True Wireless earbuds now in pairing mode.
• LED flashing blue/red (Stride TWS l)
LED turns off (Stride TWS ll) –
True Wireless earbuds now connected to
each other.
2. Bluetooth connection (earbuds to device)
• The earbuds will enter pairing mode when they
are turned on.
• LED flashing blue/red (Stride TWS I) LED turns
off (Stride TWS II) – pairing mode.
• LED turns off (both earbuds) – connected to
a device.
07
Stride TWS I
Bluetooth Pairing Request
“Headset” would like to
pair with your iPhone
Cancel
PPaaiirr
Pair
<25%
25%-50%
可旋转15
L R
1. Stride TWS includes active ear hooks to add an
additional wearing option, particularly for those
engaged in active exercise.
2. To connect the active ear hooks, gently insert the
active ear hook plug into the base of the earbud*.
Guide pins will assist in alignment.
3. Once fully inserted, rotate the ear hook clockwise
15 degrees to engage the locking mechanism.
4. To disconnect active ear hook, rotate 15 degrees
clockwise. When you feel the lock mechanism
release, gently withdraw the ear hook from the
base of earbud*.
*Do not force either earbud or active ear hook. If force
is required, remove the ear hook and begin alignment
process again.
Please note: while using active ear hooks, the earbuds
I and II are designed to be used on the opposite ear
to when used stand alone.
Quick Start Guide
03.
How to attach active ear hooks
08
4 blue lights on: Battery 100%
3 blue lights on: Battery 75%
2 blue lights on: Battery 50%
1 blue light on: Battery 25%
1 red light on: Battery requires recharge
Quick Start Guide
03.
Charging the earbuds
Charge the earbuds by placing them into the charging
case and carefully aligning the wireless contacts on
both the earbud and case.
LED indications on left and right of the charging
case battery LED indicator bar will illuminate while
charging the earbuds.
LED indicators will turn off when earbuds are fully
charged.
Charging the case
Charge the case with USB Type-C cable or by placing
the case on a compatible wireless charger.
Charging case battery LED indicator
09
Quick Start Guide - Controls
03.
10
Stride TWS I (left) Stride TWS II (right)
Power
Stride I & II Turn on manually Hold for 5
seconds
Stride I & II Turn off manually Hold for 5
seconds
Calls
Stride I & II Answer/End call Tap twice
Stride I & II Reject phone call Hold for 2
seconds
Voice Assistant
Stride I & II Activate voice
assistant
Tap 3 times
quickly
Music
Stride I & II Play/Pause Tap twice
Stride I Next track Hold for 2
seconds
Stride II Previous track Hold for 2
seconds
Stride I Volume + Tap once
Stride II Volume - Tap once
Reset
If you are experiencing issues with your earbuds,
such as failure of TWS pairing or functionality issues,
you can try to reset your earbuds.
1. Forget the ‘Stride TWS’ in your device’s
Bluetooth list.
2. Take both earbuds out of the charging case.
Tap and hold the multifunction button on both
earbuds for 5 seconds to turn them off.
3. Tap and hold the multifunction buttons on
both earbuds for 10 seconds, until the red
and blue indicator flashes rapidly.
Note: You can reset the left and right earbuds
independently or at the same time.
4. The earbuds have been reset to the default
settings. Then to re-connect to your device
refer to ‘Bluetooth pairing’ above.
Troubleshooting
04.
11
Note: Turn off automatically
The earbuds will turn off automatically after 5 minutes
if they have not paired with any device via Bluetooth.
When in low battery, they will turn off automatically
as well.
12
• Model: Stride TWS
• Chip: Qualcomm QCC3020
• Bluetooth version: 5.0
• Bluetooth profile: HFP/HSP/AVRCP/A2DP
• Audio codes: aptX, AAC, SBC
• Connection distance: Up to 15 metres / 50 feet
• Driver: 13mm
• Microphone sensitivity: -42dB 1dB
• Audio frequency range: 20-20KHz
• Playtime (varies by volume level and content):
earbuds up to 6 hours (50% volume)
charging case up to 24 hours (50% volume)
• Battery: earbuds 40mAh; charging case 500mAh
• Input: charging case 300mAh max
• Charging time: earbuds about 1 hour 20 minutes;
charging case about 1 hour 30 minutes
• Standby: earbuds about 60 hours;
charging case 90 days
• Dimensions: earbuds (each) 39x16.5x16.8mm;
charging case 48x23x57.5mm
• Weight: earbuds (each) about 4g; charging case 37g
• Operating temperature: -100C to 500C Celsius
Specifications
05.
Care and Maintenance
06.
To clean, use a lightly dampened cloth in water to
clean the exterior. Ensure that all debris is removed
from the earbud opening.
If this product is not used for a long period of time,
it’s recommended to recharge it at least once a
month to extend its life and maintain the normal
battery performance.
Keep the product in a dry location.
Do not dispose of this product in fire as batteries
may explode or leak.
Do not disassemble this product. It contains no
user-serviceable parts.
IMPORTANT: The Stride TWS must be
cleaned regularly to maintain full functionality.
13
1. Reduce sound volume on Stride TWS earbuds in
high-traffic areas, such as roads or crosswalks.
Not doing so may result in accidents due to slowed
reaction times or inability to hear surroundings.
2. Do not place Stride TWS earbuds near any flame
sources, such as lighted candles or fires.
Important Safety Information
07.
cont. >
14
Important Safety Information cont.
07.
3. Do not place Stride TWS charging case on a
wireless charger when conductive materials, such
as metal objects and magnets, are placed between
the charging case and the wireless charger. The
charging case may not charge properly, may
overheat or cause damage.
4. Children are at risk of choking if the Stride TWS
earbuds are swallowed. Please keep out of reach
from children.
Cautions (indicates a potentially hazardous situation
which if mishandled could result in moderate personal
injury and /or property damage):
1. Do not put Stride TWS in your ears without the tips.
Doing so may hurt your ears. Do not pull the tip
excessively when you attach/detach it. The wing
tip may tear.
2. Do not pierce, crush, dent, or deform Stride TWS
in any way.
3. Do not attempt to service Stride TWS yourself.
Opening or removing covers may expose you to
hazards and will void the manufacturer’s warranty.
4. To prevent risk of fire or electric shock, avoid
overloading wall outlets, extension cords, or integral
convenience receptacles.
5. Prevent the charger from contact with conductive
materials, such as liquids, dust, metal powders,
and pencil leads.
Consumer Guarantee
08.
Our Goods come with consumer guarantees under
Australia Consumer Law. Under this legislation you
are entitled to a replacement or refund for a major
failure, and compensation for any other reasonably
foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if they are not
of acceptable quality and the failure is not a major
failure. If you have any questions about your rights
in relation to this product, please return it to point
of sale or contact us at www.sproutinc.com.au.
For more information about your rights under
Australia Consumer Law go to www.accc.gov.au.
Your Stride TWS True Wireless Earbuds are warranted
to the original owner for 24 months from the
date of purchase against defects in material and
workmanship under normal use and service. The
warranty does not cover misuse of this product
and liability will not exceed the purchase price of
the product. If you have any problems while using
the product, please do not hesitate to contact our
customer support team.
For warranty and technical support
please visit sproutinc.com.au or email
[email protected]
Thank you for choosing a Sprout product.
15
/