Antop AP-D1-GS202 is an intelligent air purifier designed to improve indoor air quality. With its HEPA H13 filter, it effectively removes PM2.5 particles and harmful substances such as formaldehyde, odors, and bacteria. The nano-photocatalytic filter further sterilizes the air, decomposing odors and gases. The device also features a smart mode that automatically adjusts fan speed based on air quality, a sleep mode for quiet operation, and a child lock for safety.
Antop AP-D1-GS202 is an intelligent air purifier designed to improve indoor air quality. With its HEPA H13 filter, it effectively removes PM2.5 particles and harmful substances such as formaldehyde, odors, and bacteria. The nano-photocatalytic filter further sterilizes the air, decomposing odors and gases. The device also features a smart mode that automatically adjusts fan speed based on air quality, a sleep mode for quiet operation, and a child lock for safety.
Front side Filter
1 2 3
Product information
This product is an indoor air purifier, with the functions of smoke removal, dust removal,
deodorization, formaldehyde removal and sterilization.
Product installation
Put on the right place
When using, the air inlet should keep a certain
distance from walls and other shielding objects.
(refer to the picture below for details)
Connect the power supply
Connect the power cable to the power port
at the bottom of the air purifier.
*Keep a certain distance between the back sensor and the wall.
Product Operation
Display and operation instructions
Nano-photocatalyst
ctive manganese
A
HEPA H13
Air inlet
Air outlet
Wifi button
Timing
Brightness control
Switch
Fan speed
（1h/2h/4h/6h）
High light/Low light/
Turn off display
Life time of HEPA filter
Operation mode
Sleep mode
（Lowest fan speed. Screen
and ambient lights off）
Automatic mode
(Adjust fan speed
according to air quality)
High speed
(Maximum wind speed
operation)
Sterilization：
Light reacts with nano-photocatalytic materials in
Search "Smart life" or "Smart Graffiti" in APP store, download and install it to your phone.
If the installment is done, you can log in directly.
1.Phone: Turn on wifi and bluetooth
2.Phone: Open the APP, and press"+"button on the right top side of the page to add new device.
Key in the wifi password that your phone is connecting to.
3.Machine: Turn on the machine,long press the "wifi" button for 2 seconds.
4.Phone: There will be a connecting window coming out if the former steps were finished correctly.
Press "Yes", and your machine can connect to wifi.
If your phone cannot connect to the machine, please long press the"wifi" button for 2 seconds.
After the "Beep" sound, the machine has connected to the wifi successfully.
Long press the "wifi" button
has connected to the wifi successfully.
and the screen will be .After the "beep" sound, the machine
Smart life Smart Graffiti
the filter to sterilize bacteria and decompose
odors and harmful gases (TVOC) in the air.
*Close doors and Windows for better purification
Purification principle WIFI Using Instruction
Purification and sterilization:Download the APP
APP linking to Machine
Wifi Reset
PP uurr ii fication : HEPA filter stops PM2.5 in the air.
The formaldehyde is chemically decomposed by
activated manganese filter, and finally water and
carbon dioxide are generated.
Principle：
When the buttons are blinking, that function is
turned off.
If the buttons are on for long time, that function
is turned on.
4 5
*HCHO + O2 = CO2 + H2O
HCHO
HCHO
HCHO
H₂O
H₂O
CO₂
CO₂
CO₂
CO₂
CO₂
HCHO
HCHO
HCHO
Activated manganese filter
Fan speed adjustment
（1.Low/2.Middle/3.High）
Life time60%
Life time30%
Life time5%
(Please replace the filter in
time and press for 5 seconds
to reset the filter)
Life time100%
Children lock
(Press for 2 seconds
to display the PM2.5
concentrations)
Data display
(Air quality/Fan speed/
Operation mode/timing)
Air quality
（The fewer bars,
the worse the air quality）
above
above
above
Maintenance
Changing the filter
6 8
*Turn counterclockwise to open the bottom cover as
indicated by the bottom cover switch and take out
the filter
*Install the filter back and close the bottom cover according to
the original operating path. Now the replacement is complete.
Be sure to turn and power off the purifier before
performing the following operations
Nano photocatalyst
HEPA H13
*Rotate counterclockwise to open and take out the
nano-photocatalytic filter, and replace the HEPA H13
filter After that, install the nano-photocatalytic filter
according to the original operation mode.
7
When moving, make sure to stop the host and pull out the power cord plug.
Carry
Caution
Installment
Cleaning
·If the bottom cover is not installed correctly, the air purifier cannot start.
.stcejbo gnidleihs rehtodna llaw eht morf yawa mc02 naht erom eb dluohs telni ria ehT··
·Cleaning dust on the HEPA filter is conducive to reducing the breeding of bacteria.
telni ria fo esaerced eht tneverp otevicudnoc si eloh telni ria eht gnikcolb tsud eht pu gninaelC··
volume.
·When not in use for a long time, please cover the air outlet to prevent dust falling into the top grille
and internal fan blade surface.
Power supply Use power cords and sockets according to the following instructions to avoid fire, electric shock or damage:
·Do not excessively pull, twist, or bend the power cable. Otherwise, the core of the cable may be
exposed or broken.
·It must be connected to a power socket that fits the power cord plug.
·Please don’t use power adapter of other brands
·Be sure to disconnect the power supply before performing maintenance operations or moving the air
purifier.
Use
·If the supply cord is damaged, it must be replaced with one purchased from its manufacturer or
service department.
·If the product has abnormal sound, peculiar smell, high temperature, or irregular fan rotation, stop
using it immediately.
·Do not put fingers or foreign objects in the air inlet and outlet.
dna telni ria eht kcolb ro ni devlovni ebot ton sa os ,meti eht ot esolc .cte ,cirbaf ,riah tup ton oD··
outlet.
.·Do not sit, lean or tilt the host
Usage limits
.·Easy to dump and other unstable places
.
·Places with high temperature, humidity and water contamination, such as bathrooms.
·This product is not recommended for use by users with insufficient mental capacity or knowledge,
including children, except under the supervision or guidance of a person responsible for their safety
·Do not pour liquid or throw powder and fine matter into the machine from the air outlet.
Do not use it under the following conditions, otherwise electric shock, fire and other damage may occur:
The air inlet hole must be far away from the open flame appliance
The air purifier must be far away from high temperature and heating appliances.
please avoid combustible materials into the item.
Name
Specification
Intelligent air purifier Voltage DC 24V PM2.5 CADR
Model AP-D1-G Rated power PM CCM
Size Φ210mm*297mm Noise Formaldehyde CADR
Net 2.1kg area of HEPA filter Formaldehyde CCM
App area 25 ~ 40m2Formaldehyde
removal efficiency High PM2.5 removal
efficiency
Harmful substances
Parts
Harmful substances
Pb Hg Cd Cr(VI) PBDE
The composite
filter
Br As PBB
Plastic shell
Fan
Power adapter
HEPA filter
PCB
：The component does not contain the substance or cannot be detected by the instrument
：The component contains the substance but the content is below 2 27562 T/BG ni defiiceps timil eht
：The component contains the substance and the content exceeds the limit requirements specified in GB/T 26572
*The above test results are from ANTOP Laboratories
≈2.5㎡
14.4W
35.6dB(A)~
51.6dB(A)
104.4m3/h
P3
75.6m3/h
F4
High
9
Warranty card
Thank you for buying our products
In order for you to use this product safely and satisfactorily, please read the instructions carefully before use
× 1 refiirup ria··
·Manual × 1
Guarantee clause
Within three months from the date of the goods sold, if performance failure occurs, it can be replaced with the
new one with the intact item and gift box
(subject to inspection) excluding man-made damage.
All artificial damage, self-dismantling, unsealing, improper use of all external damage, not within the scope of
the warranty. If the card is required for warranty, the company has the right to provide non-warranty treatment
for failure to provide the card or unauthorized alteration of the card.
Warranty for one year from the date of sale, lifetime maintenance, accessories are not within the scope of
warranty.
Valid only under normal use.
Whole unit
Warranty Record:
User name：_____________________________________________
Model：____________________________________________________
Product ID：_____________________________________________
Purchasing date：____________________________(mm, dd, yyyy)
DateMaintenanceMaintenance man Remarks
·The composite filter × 1·Power adapter × 1
× 1 drac ytnarraw tcudorP··
ANTOP Intelligent Air Purifier
AP-D1-G
-
1
-
2
Antop AP-D1-GS202 is an intelligent air purifier designed to improve indoor air quality. With its HEPA H13 filter, it effectively removes PM2.5 particles and harmful substances such as formaldehyde, odors, and bacteria. The nano-photocatalytic filter further sterilizes the air, decomposing odors and gases. The device also features a smart mode that automatically adjusts fan speed based on air quality, a sleep mode for quiet operation, and a child lock for safety.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Turonic PH950 Air Purifier Plus Humidifier User guide
-
Sper scientific 860065 User manual
-
Real Spirit Advanced Mini Owner's manual
-
Triplett FM260 User manual
-
Nbdair NBD-AWU User manual
-
Govee H7121 Smart Air Purifier User manual
-
DH Lifelabs CAHP-20WH01 User guide
-
DH Lifelabs CAHP-20WC01 User guide
-
DH Lifelabs CAHP-20GC01 User guide
-
daviteq SIAQ User manual
