Crystorama COL-102-CH User manual

Type
User manual

This manual is also suitable for

ASSEMBLY INSTRUCTION MODEL #COL-102-BK
Electrical Danger Turn Power Off
WARNING:
All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local electrical codes.
You will need 2 -Medium Base Bulb
60 Watts recommended 60Watts Max.
USE LED BULBS FOR EXTENDED USE
WARNING: This product can expose you to Lead,
which is known to the State of California to cause cancer
and/or birth defects or reproductive harm. For more
information go to www.P65warnings.ca.gov
The fixture is Damp rated.
DETAILED ILLUSTRATION
5"
7.5"
4"
Glass Shade
6"
8 3/4"
2 3/4"
Side View
5.5"
11.5"
14 3/4"
The fixture can be mounted either upwards or downwards.
How to Install
1. Install the mounting plate onto the outlet box using
two outlet box screws.
2. Attach the backplate over the mounting plate and
secure with the screws.
3. Place the glass shade over the socket and secure with
socket ring. Repeat for other glass shade.
PART NUMBER MODEL #COL-102-BK
Part Number
Part Numbers
A. (2)-Wire Connector
B. (1)-Mounting plate
D. (1)-Backplate (Ø5.5")
-XSN101BKBKP5.5IN
C. (2)-Screw
G. (2)-Socket
E. (2)-Socket Ring
F. (2)-Glass Shade;W5",H7.5"
-XSN101SHA
E
F
G
A
B
C
Outlet Box
D
  • Page 1 1
  • Page 2 2

Crystorama COL-102-CH User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI