iFi Audio Mercury3.0 User guide

Brand
iFi Audio
Model
Mercury3.0
Type
User guide
Superspeed USB3.0
(and USB2.0 compatible)
audiophile connector
new composite ferrite
RF ltering with FINAL USB3.0
The generic mass production USB cable is not optimised for audio use, data and
power cables are all bunched up together, conductor quality is sub-par, this is
all surrounded by insucient shielding. Each of these negatively impact USB
signal integrity, which severely degrades sound quality.
The iFi Mercury3.0 USB cable employs heavy OFHC continuous cast copper
silver matrix conductors for the best possible signal transfer. The construction is
a custom minimum inductance parallel type with quadruple-shields; this
protects the cable from RFI and EMI noise to provide the cleanest transfer
medium possible for the USB signal.
PANTONE 430 C
PANTONE 135 C
PANTONE 185 C
PANTONE 300 C
PANTONE 362C
USB 'B' connector
With custom-machined FINAL connectors and an even better RF3 lter design,
sonically, the Mercury3.0 USB computer audio cable along with its sibling, the
Gemini3.0 set a new standard for USB3.0 and USB2.0.
Specications
USB (Data) / USB (Power)
Construction:
Conductors:
Conductor material:
Insulation:
Shielding:
Impedance:
AC spark insulation :
Connectors:
Insulation resistance:
Tensile strength:
Lengths/Net weight:
Limited Warranty:
*12 months typical or as permitted/required by local reseller laws.
**Specications are subject to change without notice.
Minimu inductance parallel construction
24 and 28AWG
Heavy OFHC continuous cast copper silver matrix
HD Polyethylene
Quadruple-shields
90 Ohms
1500V
iFi 'FINAL' USB connectors
100 MOhm
1500PSI
0.5 m (19.7") / 98 g (0.22 lbs) 1.0m (39.4") / 115 g (0.25 lbs)
1.8m (70.9") / 153 g (0.33 lbs) 3.0m (118.1") / 228g (0.50 lbs)
12months*
Audio Power
Shield
47.0 mm47.0 mm
Mercury3.0 USB cable impedance is the strictest
Mercury3.0 USB cable
204.0 mm
3.0 2.0
Audio Power
Shield
Quadruple -shields
c
Perfect match with the iGalvanic3.0 and iUSB3.0 micro/nano
The iGalvanic3.0 fully galvanically isolates the USB3.0/2.0 signal & power.
The iUSB3.0 micro/nano boast a Super‐Regulator not only with super low-noise
(0.5µV), but also super low output impedance (around 0.00015 Ohm at 1kHz, as low
as 0.00003 Ohm at 100Hz to DC) to maximise the total USB connection.
89.0 mm
89.0 mm
Superspeed USB3.0
Computer Audio Cable
Ver1.3
Technology licensed from AMR (UK). Assembled in China. S/N:
  • Page 1 1

iFi Audio Mercury3.0 User guide

Brand
iFi Audio
Model
Mercury3.0
Type
User guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents