Amcrest AL-HUB1 User guide

Brand: Amcrest

Model: AL-HUB1

Type: User guide

Amcrest AL-HUB1 is a smart alarm hub that connects to your home Wi-Fi network and allows you to monitor and control your home security system from anywhere using the Amcrest Smart Home app. With this hub, you can create custom security modes, receive alerts when sensors are triggered, and view live video footage from compatible Amcrest cameras. The hub also features a built-in siren to deter intruders and a backup battery to keep it running in case of a power outage.

AY41TR_QSG_EN_R1

Amcrest Alarm Hub

AL-HUB1

Quick Start

Guide

Amcrest Alarm Hub Power Accessories Bracket Pin

Package Contents

LED Behavior Overview

Behavior Meaning

(solid) Disarmed mode tivated.

(ashing) Ready for network connection.

(ashing rapidly) Ready to pair. Press button.

(solid) Rebooting.

(ashing) Trying to connect to network.

(ashing rapidly) Alarm has been triggered.

(alternating) Firmware upgrade in progress.

See the table below for denitions of the hub’s LED behavior:

Button

Reset

Power port

Speaker

LED indicator

Front view Back view

AY41TR_QSG_EN_R1.indd 1

2020-04-29 7:21:05 PM

AY41TR_QSG_EN_R1

STEP 1: Connecting to the App STEP 2: Installing the

Hub

Home, Away, and Disarmed Mode

1. If you already have the app,

skip this step. Scan the QR code

and install the free app from the

App Store or Google Play Store.

2. Tap the app icon to launch the app.

3. If you already have an account, skip

this step.Tap Sign up, then follow

the on screen prompts to create an

account.

1. Pick a central area for

the hub sensor to be

placed.

NOTE: Install close

to an outlet for the

power adapter. Make

sure the power cable

is not strained.

2. Pair the sensors

to ensure that the

connection to the

hub is steady based

on their designated

locations.

3. Twist the supplied

bracket clockwise to

the back of the hub.

Be sure to follow the

“UP” direction.

4. Peel the bracket’s

adhesive and stick

the hub to the desired

surface area.

To pair your sensor hub to the app:

To install your sensor hub to a

surface area:

Email:

Account Password:

Record your account details below:

4. Connect the power cable to the included USB

adapter and plug into a nearby outlet. Plug the

other end of the power cable into the power port

of your hub.

5. Once the status LED on your hub is ashing

blue and the startup chime sounds, tap +.

The app will walk you through the

rest of the setup process, step by

step.

Hub Password:

Location tips:

• The hub can be installed indoors on any at surface.

• The hub must always be connected to the power adapter.

• The optimal position for the hub is central to where the

sensors are installed and within range of the WiFi router.

The sensor hub’s settings will list all of the linked

devices. Here, you can tap + to add a sensor or

adjust the security mode.

Tap the icon to choose between one of the three

security modes:

Home Mode: Only perimeter

sensors will be monitored.

Away Mode: All sensors

will be monitored and an

alert will be sent if they’re

triggered.

Disarmed Mode: No sensors

in your home will be monitored

and no alerts will be sent.

You have the option to specify which sensors will

be armed or disarmed in the set mode.

6. Scan the QR code on the bottom of your hub

using your mobile device’s camera.

NOTE: If your mobile device cannot scan the

QR code, tap Manually enter Device ID.

7. Create a secure password for your hub.

Record your hub’s password below:

AY41TR_QSG_EN_R1.indd 2AY41TR_QSG_EN_R1.indd 2 2020-04-29 7:21:07 PM2020-04-29 7:21:07 PM

Amcrest AL-HUB1 User guide

Amcrest AL-HUB1 User guide

Amcrest AL-HUB1 User guide

Related papers

Other documents