Philips BWS010 User manual

BWS010
Philips
Brand
Philips
Model
BWS010
Type
User manual

Philips BWS010 is a solar-powered LED wall light that offers easy installation, no wiring, and multiple operational modes. With its built-in lithium battery, solar panel, and motion sensor, it's ideal for outdoor areas like gardens, walkways, and parking.

Philips BWS010 is a solar-powered LED wall light that offers easy installation, no wiring, and multiple operational modes. With its built-in lithium battery, solar panel, and motion sensor, it's ideal for outdoor areas like gardens, walkways, and parking.

Outdoor Solar LED
Wall light
Essential SmartBright Solar Wall Light
Outdoor solar wall light with inbuilt lithium ferro phosphate battery, solar panel,
inbuilt motion sensor, switch to change modes and LED lights integrated in ABS
plastic housing.
Benets
• DIY easy installation
• No wiring required
• Suitable for outdoor installation.
• Motion sensor to optimise battery and light requirements.
• Easily configurable according to consumer need.
Features
• All in one construction, the device can be installed on a wall screw.
• Completely powered by solar energy.
• IP42 rated ABS plastic housing.
• PIR motion sensor to detect motion and optimise battery life.
• Toggle switch on front to cycle through multiple operational modes.
• LiFePO4 battery included inside the luminaire.
Application
• Garden
• Walkways
• Parking areas
• Architectural Lighting
• Landscape
Warnings and Safety
• This product includes rechargeable batteries which must be adequately charged under sunlight before use.
Product family leaet, 2022, March 23 data subject to change
LightingLighting
Versions
Application conditions
Ambient temperature range 0 to +45 °C
Battery location Inside luminaire
Solar dimming prole As per mode
switch
Approval and application
Ingress protection code IP 42
Controls and dimming
Dimmable Yes
Congurability Congurable
Operating and electrical
Battery type Lithiumion - NMC
Battery voltage 3.7 V
Charge controller type PWM
Panel type Poly crystalline
Initial performance (IEC compliant)
Init. Corr. Colour Temperature 6500 K
Init. Colour rendering index >70
Mechanical and housing
Overall length 125 mm
Operating and electrical
Order Code Full Product Name Battery ampere hour Panel peak wattage
64903699 BWS010 LED50/765 0.8 Ah 0.5 W
64904399 BWS010 LED100/765 1.2 Ah 0.75 W
64905099 BWS010 LED300/765 2 Ah 1.3 W
Mechanical and housing
Order Code Full Product Name Overall height Overall width
64903699 BWS010 LED50/765 52 mm 99 mm
64904399 BWS010 LED100/765 54 mm 178 mm
Order Code Full Product Name Overall height Overall width
64905099 BWS010 LED300/765 54 mm 178 mm
Essential SmartBright Solar Wall Light
2Product family leaet, 2022, March 23 data subject to change
Essential SmartBright Solar Wall Light
© 2022 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or
completeness of the information included herein and shall not be liable for any action in reliance thereon. The
information presented in this document is not intended as any commercial oer and does not form part of any
quotation or contract, unless otherwise agreed by Signify. All trademarks are owned by Signify Holding or their
respective owners.
www.lighting.philips.com
2022, March 23 - data subject to change
  • Page 1 1
  • Page 2 2
  • Page 3 3

Philips BWS010 User manual

BWS010
Philips
Brand
Philips
Model
BWS010
Type
User manual

Philips BWS010 is a solar-powered LED wall light that offers easy installation, no wiring, and multiple operational modes. With its built-in lithium battery, solar panel, and motion sensor, it's ideal for outdoor areas like gardens, walkways, and parking.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents