CERTECH UTP Keystone Jack 180˚ Installation guide

UTP Keystone Jack 180˚
Brand
CERTECH
Model
UTP Keystone Jack 180˚
Type
Installation guide

This manual is also suitable for

INSTALLATION GUIDE
UTP Keystone Jack 180˚
WWW.CERTECH.COM.AU Version1.1
Strip the outer jacket 38mm
Seat the colour coded wire pairs in
the correspoding colours on the IDC’s
as per wiring configuration T568A
or T568B
Punch down the wire pairs with
the Rapid Termination Tool.
Carefully snip the excess wires.
Clip the cable retention cap/dust
cover into place.
1.
2.
3.
4.
YOU WILL NEED
CTSTRIP
UTP/STP Cable
Cutter & Stripper
JKRAPID
Rapid Termination
Tool for 180˚
Keystone Jacks
  • Page 1 1

CERTECH UTP Keystone Jack 180˚ Installation guide

UTP Keystone Jack 180˚
Brand
CERTECH
Model
UTP Keystone Jack 180˚
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents