2. Health & beauty
  3. Alarm clocks
  4. Betus
  5. B088WMM2KN
B088WMM2KN

Betus B088WMM2KN User manual

  • Hello! I've reviewed the user manual for the Travel Alarm Clock. This document provides instructions on setting up the time, alarm, using the timer function, changing temperature units and using backlight. I'm ready to answer any specific questions you may have about using your device.
  • How do I change the time format?
    How do I set the time?
    How do I set the alarm?
    How do I turn the alarm on or off?
    How does the snooze work?
    How do I use the count-down timer?
    How do I change the temperature unit?
DIGITAL TRAVEL ALARM CLOCK USER MANUAL
POWER ON: Pull plastic insulator strip to activate battery (included).
SETTING
1. SET TIME FORMAT: In time mode, press “12/24” button to change time format between 12-hour and 24-hour.
2. SET TIME: In time mode, press “SET” button to enter into time setting mode by following the sequence of
hours, minutes, years, months, days & exit. Press “UP” and “DOWN” button to set up your desired time and
date. Please ensure you set the correct year, otherwise the date/day will display incorrectly.
3. ALARM SETTING: Press “MODE” button to enter into alarm setting mode. Then press “SET” button to set
hours, minutes, snooze and alarm tone in sequence. (Press “UP” and “DOWN” button to choose your desired
time, snooze time and alarm).
TURN ON/OFF ALARM & SNOOZE: In alarm mode, press “DOWN” or “UP” button to turn on/off the alarm and
snooze.
When alarm goes off, it will ring for 1 minute. When Snooze is set up. Snooze will work ONLY twice.
During alarm, press any button (except “set”) to snooze, press “SET” to discharge.
4. COUNT-DOWN: Press “TIMER” to enter into timer setting mode. Press “SET” button to set hours, minutes and
seconds in sequence. Press “UP” and “DOWN” button to adjust. Then press “TIMER” button to start or pause
the timer.
5. SWITCH TEMPERATURE UNIT: Press “C/F” button to change temperature unit.
6. BACKLIGHT: Tap the black switch of backlight to turn on the backlight. The light will turn on for 7-10 seconds.
REPLACE BATTERY: Pull out the battery compartment, and replace the old battery with new one. (The negative side
of the battery should be face-up). Then Push the compartment back.
WARNING! DO NOT PRESS THE LCD SCREEN
MORE QUESTIONS OR CONCERNS? FEEL FREE TO CONTACT THE CUSTOMER SUPPORT!
/