S9 Smartwatch Wireless Charger

Shenzhen Xingyuansheng Electronic Technology S9 Smartwatch Wireless Charger User manual

  • Hello! I've reviewed the user manual for Galaxy Watch 3, Galaxy Watch, Galaxy Watch Active 2, Galaxy Watch Active, Galaxy Watch Gear Sport and Galaxy Watch Gea S3 smartwatches. This document outlines important precautions, like temperature use recommendations and adapter power requirements. The manual also details the device's compatibility with various Galaxy smartwatch models and provides FCC and RF exposure information. I'm ready to answer any questions you have about this device.
  • What is the recommended operating environment for this device?
    What is the required adapter power for this device?
    Does the Type-C interface support fast charge?
    What smartwatch models are compatible with the device?
Users Manual
S9
Precautions for
use
1.Recommended for use in environment
below 30℃
2.Please be sure use the adapter power
not below 5V/2A
3.The Type-C interface doesn t support fas
charge
Product
parameters
lnterface:USB
Wireless output:DC5V/500mA (max)
cm pat ibil it y
Smartwatches:
Galaxy Watch 3
Galaxy Watch
Galaxy Watch Active 2
Galaxy Watch Active
Galaxy Watch Gear Sport
Galaxy Watch Gea S3
(NOT FOR IWATCH).
Tip:
gear s3
geacsport
galaxy watch
The
watch
Is ,equested to
place In the ps lt l a l ig ne d with the
red center !me.
gala,y watch active
galaxy watch active2
galaxy watch3
Place the watch
in the center
Warning: Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.
FCC Warning Statement:
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
NOTE:This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
NOTE: This device complies with part 18 of the FCC Rules.
Information to the user.
1.the device has potential interference,but the interference is very
small and meets the requirements of the FCC rule
2.Equipment system maintenance is simple, please refer to the manual
3.The user can take simple measures to correct the interference. Such
as staying away from interference sources, turning off interference
sources, etc.
RF exposure compliance statement:
The equipment complies with FCC Radiation exposure limit set forth
for uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator and your
body.
/