Casio 5xxx Series User Edifice ECB-20 User manual

Brand: Casio 5xxx Series User

Model: Edifice ECB-20

Category: Watches

Type: User manual

1

Quick Reference Manual 5638

MA2005-EA © 2020 CASIO COMPUTER CO., LTD.

Congratulations upon your selection of this CASIO watch.

To ensure that this watch provides you with the years of service for which it is designed,

carefully read and follow the instructions in this manual, especially the information under

“Operating Precautions” and “User Maintenance”.

Be sure to keep all user documentation handy for future reference.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth

SIG, Inc. and any use of such marks by CASIO COMPUTER CO., LTD. is under license.

This product has a Mobile Link function that lets it communicate with a Bluetooth®

capable phone to perform automatic time adjustment and other operations.

x This product complies with or has received approval under radio laws in various

countries and geographic areas. Use of this product in an area where it does not

conform to or where it has not been approved under applicable radio laws may be

punishable under local laws. For details, visit https://world.casio.com/ce/BLE/.

x Use of this product inside of an aircraft is restricted by the aviation laws of each

country. Be sure to obey instructions provided by flight personnel concerning use of

devices such as this product.

Visit the website below for the operation

manual (Operation Guide) of this watch.

https://world.casio.com/manual/wat/

Using the Watch

General Guide

1. p.m. indicator (No indication for a.m.)

2. Summer time display indicator

3. Hands shifted

4. Alarm enabled

5. Hourly time signal enabled

6. Mode hand operation is linked with operations

in each watch mode.

7. World Time Mode indicator

8. Alarm Mode indicator

9. Auto Light enabled

10.

Airplane Mode enabled

11.

Phone connected*

* Hold down D for about two seconds to

establish a Bluetooth connection with a phone.

Selecting a Mode

Each press of C cycles between modes as shown below.

x Hold down C for at least two seconds to enter the Timekeeping Mode.

Timekeeping Mode

Alarm Mode

Stopwatch Mode Timer Mode

CCC

C

World Time Mode

C

1

2

3

4

5

6

8

9

10

7

11

Setting the Time

1. In the Timekeeping Mode, hold down

B. Release the button when the city

name appears.

x [SET] will flash and then the city name

will appear.

City name

2. Press C three times to display the

seconds setting screen.

3. Press D to reset the seconds count

to 00.

x 30 to 59 seconds: Adds 1 to minutes.

4. Press C to move the flashing to the

hour setting.

5. Use A and D to change the setting.

6. Press C to move the flashing to the

minute setting.

7. Use A and D to change the setting.

8. Press C twice to move the flashing to

the year setting.

9. Use A and D to change the setting.

10.

Press C to move the flashing to the

month setting.

11.

Use A and D to change the setting.

12.

Press C to move the flashing to the

day setting.

13.

Use A and D to change the setting.

14.

Press B to exit the setting screen.

Specifications

Accuracy at Normal

Temperature:

±15 seconds per month average when time adjustment by

communication with a phone is not possible.

Analog Timekeeping: Hour, minute (moves every 20 seconds)

Digital Timekeeping: Hour, minute, second, month, day, day of the week, a.m./

p.m.(P)/24-hour timekeeping, Full Auto Calendar (2000 to 2099),

Summer Time

Stopwatch: Measurement unit: 1/1000 seconds (first hour);

1/10 seconds (after first hour)

Measurement range: 23 hours, 59 minutes, 59.9 seconds

Measurement functions:

Normal elapsed time; lap times

Timer: Measuring unit: 1 second

Countdown range: 24 hours

Setting unit: 1 second

10-second beeper at countdown end

Alarms: 5 Daily alarms; Hourly time signal

Setting units: Hour, minute

Alarm tone duration: 10 seconds

Hourly time signal: Beep every hour on the hour

World Time: Current time in 38 cities (38 time zones) plus UTC time; summer

time; Home City/World Time swapping

Mobile Link: Auto time correction

Phone finder

Watch operation sounds the alert sound of the mobile phone.

World Time

Current time for approximately 300 cities selected for the watch

Home Time/World Time swapping

Stopwatch data transfer

200 measurement records (date and time, lap time, lap number)

Auto summer time switching

Automatic switching between standard time and summer time

Timer setting

Alarm setting

Hand position correction

Schedule timer

Links with your phone’s calendar, and uses the watch’s hands

and digital display to show a countdown of the time until

completion of an event, ending time, etc.

Data Communication Specifications

Bluetooth®

Frequency band: 2400 MHz to 2480 MHz

Maximum transmission: 0 dBm (1 mW)

Communication range: 2 meters max. (depends on environment)

Other: Double LED Illumination: Face LED and digital display LED with

Auto Light, Super Illuminator, afterglow, selectable illumination

duration (1.5 seconds, 3 seconds); button operation tone on/off;

schedule notification tone on/off; date display (month/day, day/

month); day of the week display (6 languages); Airplane Mode;

Hand Shift; low battery alert

Power Supply: One lithium battery (CR2016)

Approximate Battery

Life:

2 years

Conditions:

xBluetooth connection time: 12 hours/day

xAlarm: Once (10 seconds)/day

xIllumination: Once (1.5 seconds)/day

Specifications are subject to change without notice.

1

Casio 5xxx Series User Edifice ECB-20 User manual

Brand: Casio 5xxx Series User

Model: Edifice ECB-20

Category: Watches

Type: User manual

Download PDF

Related papers

Other documents