Rev-A-Shelf 447-BCSC-6C Instruction Sheet

Rev-A-Shelf
Brand
Rev-A-Shelf
Model
447-BCSC-6C
Type
Instruction Sheet

This manual is also suitable for

Center Line of Cabinet Opening
(4) Screw and Pilot
Hole Locations
Fold Template along
dotted line to t
cabinet opening
Front edge of paper
to front of cabinet
(or front of face frame)
12400 Earl Jones Way
Louisville, KY 40299
rev-a-shelf.com
Customer Service: 800-626-1126
9.5” SOFT-CLOSE PULLOUT WITH BLUM TANDEM SLIDES WITH BLUMOTION
TOOLS REQUIRED:
30 MIN
ESTIMATED ASSEMBLY TIME:
CARE AND MAINTENANCE:
Clean with a damp cloth and
wipe parts dry.
PARTS LIST
- Frame assembly
- Slide assembly
- (4) #6 x 1/2” at head screw
- (4) #8 x 3/4” deep thread pan
head screw
- Template
- Rub Bushing Kit
3
32
Attaching slide to cabinet
1) Using the screw and pilot hole locations, pre-drill (4) holes using a 3/32” drill bit.
2)Removetemplateandattachtheslideassemblytotheoorofthecabinetusing(4)#8x3/4”deepthread
screws provided.
3)Withtheslidesinthefullyclosedposition,placetheframeontheslidesandpushbackuntilyoufeelthe
slidesengagethelockingdevices(youwillhearaclicksound).Fullycycletheframeafewtimes.
Attaching the cabinet door
1) Usinga3/8”wrench,loosenthe(4)locknutsinsidethefrontwalloftheunit(SeeFig1).
2) PulltheattachedAdjustableDoorMountingBracketstoensurethatyouaremountingtothe“thick”portion
ofthecabinetdoor(frontofpulloutshouldlineupwithfrontoffaceframe).
3) Usethe(4)#6x1/2”atheadscrewsprovidedtoattachthedoortothepulloutunit.
4) Ifthedoorneedstobeadjustedtolayushagainstthefaceframe,loosenthelocknutsandturnthe“T-Nut”
screwssotheT-Nutscrewspushagainstthemetalbracket.Eachcornercanbeadjustedindependently.
(Note:Itisrecommendedthatdoorbumpersbeusedoneachcornertoensurequietoperation)
Install rub bushings using enclosed kit and instructions (Note: Chassis may need to be removed for proper installation)
Fig1
T-NutScrewfor
TiltAdjustment
LockNut
T-448SCFL-0120
3
8
Center Line of Cabinet Opening
Front edge of paper
to front of cabinet
(or front of face frame)
Attaching slide to cabinet
1) Using the screw and pilot hole locations, pre-drill (4) holes using a 3/32” drill bit.
2)Removetemplateandattachtheslideassemblytotheoorofthecabinetusing(4)#8
x3/4”deepthreadscrewsprovided.
3)Withtheslidesinthefullyclosedposition,placetheframeontheslidesandpushback
untilyoufeeltheslidesengagethelockingdevices(youwillhearaclicksound).Fully
cycletheframeafewtimes.
Attaching the cabinet door
1) Usinga3/8”wrench,loosenthe(4)locknutsinsidethefrontwalloftheunit(SeeFig1).
2) PulltheattachedAdjustableDoorMountingBracketstoensurethatyouaremounting
tothe“thick”portionofthecabinetdoor(frontofpulloutshouldlineupwithfrontof
faceframe).
3) Usethe(4)#6x1/2”atheadscrewsprovidedtoattachthedoortothepulloutunit.
4) Ifthedoorneedstobeadjustedtolayushagainstthefaceframe,loosenthelock
nutsandturnthe“T-Nut”screwssotheT-Nutscrewspushagainstthemetalbracket.
Eachcornercanbeadjustedindependently.(Note:Itisrecommendedthatdoor
bumpersbeusedoneachcornertoensurequietoperation)
Install rub bushings using enclosed kit and instructions (Note: Chassis may need to be removed for
proper installation)
12400 Earl Jones Way
Louisville, KY 40299
rev-a-shelf.com
Customer Service: 800-626-1126
6.5” SOFT-CLOSE PULLOUT WITH BLUM TANDEM SLIDES WITH BLUMOTION
TOOLS REQUIRED:
30 MIN
ESTIMATED ASSEMBLY TIME:
CARE AND MAINTENANCE:
Clean with a damp cloth and
wipe parts dry.
PARTS LIST
- Frame assembly
- Slide assembly
- (4) #6 x 1/2” at head screw
- (4) #8 x 3/4” deep thread pan
head screw
- Template
- Rub Bushing Kit
3
32
Fold Template along dotted line to t
cabinet opening.
Fig1
T-NutScrewfor
TiltAdjustment
LockNut
T-448SCFL-0120
3
8
(4) Screw and Pilot
Hole Locations
  • Page 1 1
  • Page 2 2

Rev-A-Shelf 447-BCSC-6C Instruction Sheet

Rev-A-Shelf
Brand
Rev-A-Shelf
Model
447-BCSC-6C
Type
Instruction Sheet
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers