User Guide
Quality, Design and Innovation
home.liebherr.com/fridge-manuals
Contents
1 The appliance at a glance..................................... 3
1.1 Delivered contents....................................................... 3
1.2 Overview of appliances and equipment................... 3
1.3 SmartDevice.................................................................. 3
1.4 Range of appliance use............................................... 4
1.5 Conformity..................................................................... 4
1.6 SVHC substances according to REACH regulation. 4
1.7 EPREL Database........................................................... 4
2 General safety instructions.................................. 4
3 Functionality of the Touch & Swipe display......... 6
3.1 Navigation and symbol explanation......................... 6
3.2 Menus............................................................................. 6
3.3 Sleep mode................................................................... 7
4 Start-up................................................................. 7
4.1 Switching on appliance (first use)............................ 7
5 Storage.................................................................. 7
5.1 Information regarding storage................................... 7
5.2 Freezer compartment.................................................. 8
5.3 Storage times............................................................... 8
6 Energy saving........................................................ 8
7 Use......................................................................... 9
7.1 Controls and displays.................................................. 9
7.1.1 Status display..............................................................9
7.1.2 Display symbols.......................................................... 9
7.2 Appliance functions..................................................... 9
7.2.1 Notes on the appliance functions............................9
Turn off appliance.......................................................9
WiFi.............................................................................. 9
Temperature...............................................................10
Temperature unit.......................................................10
SuperFrost................................................................. 11
PartyMode...................................................................11
SabbathMode............................................................ 11
EnergySaver............................................................... 11
Display brightness.................................................... 12
Door alarm..................................................................12
Entry lock....................................................................12
Language....................................................................12
Info...............................................................................12
Demo mode............................................................... 12
Reset........................................................................... 13
7.3 Error messages............................................................. 13
7.3.1 Warnings.................................................................... 13
8 Equipment............................................................. 14
8.1 Drawers.......................................................................... 14
8.2 Glass shelves................................................................ 15
8.3 VarioSpace.................................................................... 16
8.4 Freezer packs................................................................ 16
8.5 Ice cube tray with lid................................................... 16
9 Maintenance.......................................................... 16
9.1 Disassembling / assembling pull-out systems...... 16
9.2 Defrosting the appliance............................................ 17
9.3 Cleaning the appliance............................................... 17
10 Customer support................................................. 18
10.1 Technical specifications............................................. 18
10.2 Operating noises.......................................................... 18
10.3 Technical faults............................................................ 18
10.4 Customer Service......................................................... 19
10.5 Rating plate................................................................... 20
11 Decommissioning.................................................. 20
12 Disposal................................................................. 20
12.1 Preparing appliance for disposal.............................. 20
12.2 Disposing of the appliance in an environmentally
friendly manner............................................................ 20
The manufacturer is constantly working to improve all types
and models. Therefore, please be aware that we reserve the
right to make changes to the shape, equipment and tech‐
nology.
Symbol Explanation
Read instructions
Please read the information in these instruc‐
tions carefully to understand all of the benefits
of your new appliance.
Full instructions on the internet
You can find detailed instructions on the
internet using the QR code on the front of
these instruction or by entering the service
number at home.liebherr.com/fridge-
manuals.
The service number can be found on the serial
tag:
Fig. Example illustration
Check appliance
Check all parts for transport damage. If you
have any complaints, please contact your
agent or customer service.
Differences
These instructions apply to a range of models,
so there may be differences. Sections that
apply to certain models only are indicated by
an asterisk (*).
Instructions and results
Instructions are marked with a .
Results are marked with a .
Videos
Videos about the appliances are available on
the YouTube channel of Liebherr-Hausgeräte.
These operating instructions apply to:
2 * Depending on model and options
IFN..i 35.. / 39..
SIFN..i 39.. / 41.. / 45.. / 51..
Note
If your appliance has an N in its appliance designation, it is
a NoFrost appliance.
1 The appliance at a glance
1.1 Delivered contents
Check all parts for transport damage. If you have any
complaints, please contact the retailer or customer service.
(see 10.4 Customer Service)
Delivery contains the following parts:
-Integrated appliance
-Equipment (depending on your model)
-Installation parts (depending on your model)
-“Quick Start Guide”
-“Installation Guide”
-Service brochure
1.2 Overview of appliances and equip‐
ment
Fig. 1 Example illustration
(1) Controls (6) VarioSpace
(2) LED interior light (7) Type plate
(3) NoFrost (8) Adjustable feet
(4) Cold storage accumu‐
lator
(9) Soft-closing mechanism
(5) Drawers
Note
uThe shelves, drawers, and baskets are arranged for
optimal energy efficiency in the factory configuration.
However, changes to the arrangement within the given
insertion options – for example the arrangement of
shelves in the fridge compartment – have no effect on
energy consumption.
1.3 SmartDevice
SmartDevice is the networking solution for your freezer.
If your appliance is SmartDevice-enabled or compatible, you
can quickly and easily connect your appliance to your WiFi.
The appliance at a glance
* Depending on model and options 3
With the SmartDevice app, you can operate your appliance
from a mobile device. Additional functions and setting
options are available in the SmartDevice app.
SmartDevice-
enabled appliance:
Your appliance is capable of being a
SmartDevice. To be able to connect
your device to WiFi, you need to
download the SmartDevice app.
More information
about SmartDe‐
vice:
smartdevice.liebherr.com
Downloading the
SmartDevice app:
After installing and configuring the
SmartDevice app, you can connect
your appliance to the WiFi using the
SmartDevice app and the WiFi appli‐
ance function (see WiFi) .
Note
The SmartDevice function is not available in the following
countries: Russia, Belarus, Kazakhstan.
1.4 Range of appliance use
Normal use
The appliance is only suitable for cooling food
for residential or other similar environments.
This includes the following types of uses
-in staff kitchens, bed and breakfasts,
-by guests in country homes, hotels, motels
and other types of accommodations,
-for catering and similar wholesale services.
All other types of uses are not permitted.
Foreseeable misuse
The following uses are specifically prohibited:
-Storage and cooling of medication, blood
plasma, laboratory preparations or similar
substances and products in accordance
with the Medical Device Directive
2007/47/EC
-Use in areas at risk of explosion
Incorrect appliance use can cause damage to
the stored products or cause them to spoil.
Climate ratings
The appliance is set to operate within
specific ambient temperature limits
according to its climate rating The climate
rating for your appliance is printed on the
rating plate
Note
uTo guarantee trouble-free operation,
comply with the indicated ambient temper‐
atures.
Climate rating for ambient temperatures from
SN 10 °C to 32 °C
N 16 °C to 32 °C
ST 16 °C to 38 °C
T 16 °C to 43 °C
SN-ST 10 °C to 38 °C
SN-T 10 °C to 43 °C
1.5 Conformity
The refrigerant circuit has been tested for leaks. When
installed, the appliance complies with the applicable safety
regulations and with the corresponding directives.
For the EU
market:
The appliance complies with directive
2014/53/EU.
For the GB
market:
The appliance complies with the Radio
Equipment Regulations 2017 SI 2017 No.
1206.
The full text of the EU Declaration of Conformity is available
on the following website: www.Liebherr.com
1.6 SVHC substances according to
REACH regulation
You can check whether your appliance contains SVHC
substances according to REACH regulation at the following
link: home.liebherr.com/de/deu/de/liebherr-erleben/nach‐
haltigkeit/umwelt/scip/scip.html
1.7 EPREL Database
Details about energy labeling and ecodesign requirements
will be available on the European product database (EPREL)
from March 1, 2021. You can access the product database at
the following link: https://eprel.ec.europa.eu/ You will be
asked to enter the model ID. You can find the model ID on
the type plate.
2 General safety instructions
Please keep these operating instructions in a
safe place so you can refer back to them at
any time.
If you pass the appliance on, please hand
these operating instructions to the new
owner.
Read these operating instructions before use
in order to use the appliance safely and
correctly. Follow the instructions, safety
instructions and warning messages included
at all times. They are important for ensuring
you can operate and install the appliance
safely and without any problems.
General safety instructions
4 * Depending on model and options
Dangers for the user:
-This appliance can be operated by children
as well as by persons with reduced phys‐
ical, sensory or mental capabilities or lack
of experience and knowledge if they are
supervised or have been instructed in the
safe use of the appliance and understand
the associated risks. Children must not play
with the appliance. Cleaning and user
maintenance must not be performed by
children unless they are supervised. Chil‐
dren between the ages of 3 and 8 may load
and unload the appliance. Children under
the age of 3 must be kept away from the
appliance if they are not constantly super‐
vised.
-The socket must be easily accessible so
that the appliance can be disconnected
quickly from the electricity in an emer‐
gency. It must not be located in the area
behind the appliance.
-When disconnecting the appliance from the
outlet, always take hold of the plug. Do not
pull on the cable.
-Disconnect the power plug or switch off
the power if a fault occurs.
-Do not damage the mains power line. Do
not operate the appliance from a defective
mains power line.
-Repairs and work on the appliance may
only be carried out by after sales service or
other specifically trained qualified
personnel.
-Only install, connect and dispose of the
appliance in accordance with the instruc‐
tions.
-Only operate the appliance after it has
been installed.
Risk of fire:
-The refrigerant contained within the appli‐
ance (specifications on the rating plate) is
environmentally friendly, but flammable.
Leaking refrigerant can ignite.
•Do not damage the pipes of the refrig‐
erant circuit.
•Do not handle ignition sources inside the
appliance.
•Do not use electrical devices inside the
appliance (e.g. steam cleaners, heaters,
ice cream makers, etc.).
•If refrigerant leaks: Remove naked flames
or ignition sources located near the area
of the leak. Air the room well. Contact the
customer service department.
-Do not store explosive materials or spray
cans with flammable propellants, such as
e.g. butane, propane, pentane, etc. in the
appliance. You can recognize such spray
cans by the printed contents or a flame
symbol. Any leaking gasses can be ignited
by electrical components.
-Keep lit candles, lamps and other objects
with naked flames away from the appliance
so they do not cause a fire.
-Alcoholic beverages or other containers
holding alcohol must always be tightly
sealed for storage purposes. Any leaking
alcohol can be ignited by electrical compo‐
nents
Tipover hazard:
-Do not stand or climb on the base, drawers,
doors, etc. This applies in particular to chil‐
dren.
Risk of food poisoning:
-Do not consume food that has passed its
best before date.
Danger of frostbite, feelings of numbness
and pain:
-Avoid prolonged skin contact with cold
surfaces or chilled/frozen food or take
protective measures, e.g. wear gloves.
Risk of injury and damage:
-Hot steam may lead to injuries. Do not use
any electrical heating or steam cleaning
equipment, naked flames or defrosting
sprays for defrosting
-Do not remove ice with sharp objects
Risk of crushing:
-Do not reach into the hinge when opening
and closing the door. Fingers may get
trapped.
Symbols on the device:
The symbol can be on the compressor. It
refers to the oil in the compressor and
refers to the following danger: Can be
lethal if swallowed or inhaled. This notice
only applies for recycling. There is no
danger during normal operation.
The symbol is located on the compressor
and indicates the danger of inflammable
materials. Do not remove the label.
This label or a similar one may be located
on the rear of the appliance. This label indi‐
cates that there are vacuum insulation
panels (VIP) or perlite panels in the door
and/or housing. This notice only applies for
recycling. Do not remove the label.
Observe the warning messages and other
detailed information in the other sections:
General safety instructions
* Depending on model and options 5
DANGER indicates a hazardous situation,
which if not avoided, will result in
death or serious injury.
WARNING indicates a hazardous situation,
which if not avoided, could result
in death or serious injury.
CAUTION indicates a hazardous situation,
which if not avoided, will result in
minor or moderate injury.
NOTICE indicates a hazardous situation,
which if not avoided, could result
in damage to property.
Note indicates useful advice and tips.
3 Functionality of the
Touch & Swipe display
You operate your appliance using the Touch & Swipe display.
You select appliance functions in the Touch & Swipe display
(hereafter referred to as display) by tapping them. If you do
not perform any action on the display for 10 seconds, the
display either jumps back to the higher-level menu or
directly to the status display.
3.1 Navigation and symbol explanation
In the illustrations, different symbols are used to navigate
the display. The following table describes these symbols.
Symbol Description
Briefly touch the display:
Activates/deactivates function.
Confirms selection.
Opens submenu.
Touch the display for a specified time
(e.g. 3 seconds):
Activates/deactivates function or
value.
Swipe left or right:
Navigate in the menu.
Briefly touch the Back symbol:
Jumps back one menu level.
Press and hold the Back symbol for
3 seconds:
Jumps back to the status display.
Arrow with clock:
It takes more than 10 seconds for the
following message to appear in the
display.
Arrow with a time indication:
It takes the specified amount of time
until the following message appears in
the display.
Symbol Description
“Open Settings menu” symbol:
Navigates to the Settings menu and
opens the settings menu.
If necessary: Navigate to the desired
function in the Settings menu.
(see 3.2.1 Opening the Settings menu)
“Open Advanced menu” symbol:
Navigates to the Advanced menu and
opens the advanced menu.
If necessary: Navigate to the desired
function in the Advanced menu.
(see 3.2.2 Advanced menu)
No action for
10 seconds
If you do not perform any action on the
display for 10 seconds, the display
either jumps back to the higher-level
menu or directly to the status display.
Open door and
close it again.
If you open the door and immediately
close it again, the display jumps
directly back to the status display.
Note: Illustrations of the display are shown in the English
version.
3.2 Menus
The appliance functions are distributed over various menus:
Menu Description
Main menu When you switch the appliance on, you
are automatically in the main menu.
From here you can navigate to the most
important appliance functions, to the
Settings menu and to the Advanced
menu.
Settings menu
The Settings menu contains additional
appliance functions for setting up your
appliance.
Advanced menu The advanced menu contains special
appliance functions for setting up your
appliance. Access to the Advanced menu
is protected by the numerical code 1 5 1.
3.2.1 Opening the Settings menu
Fig. 2 Example illustration
uCarry out action steps according to the illustration.
wSettings menu is open.
uIf necessary: Navigate to the desired function.
Functionality of the Touch & Swipe display
6 * Depending on model and options
3.2.2 Advanced menu
Fig. 3
Fig. 4 Example illustration, access with numerical code 151
uCarry out action steps according to the illustration.
wThe advanced menu is open.
uIf necessary: Navigate to the desired function.
3.3 Sleep mode
If you do not touch the display for 1 minute, the display
switches to sleep mode. In sleep mode, the display bright‐
ness is dimmed.
3.3.1 Ending sleep mode
uTouch the display briefly with your finger.
wSleep mode is ended.
4 Start-up
4.1 Switching on appliance (first use)
Make sure that the following requirements are fulfilled:
qThe appliance is properly installed and connected
according to the installation instructions.
qAll adhesive strips, adhesive and protective films and
transport locks are removed from inside and on the appli‐
ance.
qAll marketing leaflets are removed from the drawers.
qYou are familiar with the functionality of the
Touch & Swipe display. (see 3 Functionality of the
Touch & Swipe display)
Switch on the appliance using the Touch & Swipe display.
uIf the display is in sleep mode: Briefly touch the display.
uCarry out action steps according to the illustration.
Fig. 5 Example illustration
wThe status display appears.
wThe appliance cools to the temperature set at the factory.
wThe appliance starts in demo mode (status display with
DEMO appears): If the appliance starts in demo mode,
you can deactivate demo mode within the next 5 minutes.
(see Demo mode)
More information:
-Start the SmartDevice for the first time. (see 1.3 Smart‐
Device) and (see WiFi)
Note
The manufacturer recommends:
uStore frozen foods at -18 °C or colder.
uObserve the notes on storing food. (see 5.1 Information
regarding storage)
Note
Accessories can be purchased from the Liebherr-Hausg‐
eräte store at home.liebherr.com/shop/de/deu/
zubehor.html.
5 Storage
5.1 Information regarding storage
WARNING
Danger of fire
uDo not use electrical appliances inside the food storage
compartments of the appliance, unless they are of the
type recommended by the manufacturer.
Note
Insufficient ventilation results in an increase in energy
consumption and reduction of the refrigerating performance
uAlways keep the air slots unobstructed.
Observe the following specifications for storage:
-Keep the air vents on the inside of the rear wall free.
-Package food properly.
-Package raw meat or fish in clean, closed containers.
This will prevent meat or fish from touching or dripping
onto other food.
-Leave space between goods to ensure good air circula‐
tion.
-Store food according to the instructions on the pack‐
aging.
-Always observe the best-before date indicated on the
packaging.
Start-up
* Depending on model and options 7
Note
Failure to follow these guidelines can lead to foodstuffs
spoiling.
5.2 Freezer compartment
Here, a dry, frosty storage climate is created at -18 °C. The
frosty storage climate is suitable for storing frozen food for
several months, for making ice cubes or freezing fresh food.
5.2.1 Freezing food
Freezing quantity
The maximum amount of fresh food that you can freeze
within 24 hours is specified on the type plate
(see 10.5 Rating plate) under “Freezing capacity ... kg/24h.”
To ensure that food quickly freezes through, adhere to the
following quantities per package:
-Fruit and vegetables up to 1 kg
-Meat up to 2.5 kg
Freezing food using SuperFrost
Depending on how much food you have to freeze, you can
activate SuperFrost (see SuperFrost) before freezing to
achieve lower freezing temperatures.
uActivate SuperFrost if the amount of food you have to
freeze is more than approx. 2 kg.
The time at which you activate SuperFrost depends on the
amount of food you have to freeze:
Freezing quan‐
tity
Time at which you should activate
SuperFrost
Small amount of
food to freeze
Activate SuperFrost about 6 hours
before freezing.
You can place the food in the freezer as
soon as the appliance automatically
deactivates SuperFrost.
Maximum
amount of food
to freeze
Activate SuperFrost about 24 hours
before freezing.
You can place the food in the freezer as
soon as the appliance automatically
deactivates SuperFrost.
Arranging your food properly
CAUTION
Risk of injury from broken glass!
Bottles and cans with beverages can burst during freezing.
This applies in particular to carbonated beverages.
uOnly freeze bottles and cans with beverages if you have
activated the BottleTimer function in the SmartDevice
app.
Appliance height < 1220 mm
Freezing quantity Arranging your food properly
Small amount of
food to freeze
Distribute packaged groceries
throughout all drawers.
If possible, place groceries at the
back of the drawer near the rear wall.
Maximum amount
of food to freeze
Distribute packaged groceries
throughout all drawers.
If possible, place groceries at the
back of the drawer near the rear wall.
Appliance height ≥ 1220 mm
Freezing quantity Arranging your food properly
Small amount of
food to freeze
Distribute packaged groceries
throughout all drawers, but do not
place any groceries in the top
drawer.
Maximum amount
of food to freeze
Distribute packaged groceries
throughout all drawers.
If possible, place groceries at the
back of the drawer near the rear
wall.
5.2.2 Defrosting food
WARNING
Danger of food poisoning!
uDo not re-freeze defrosted food.
uUse defrosted foodstuff as quickly as possible.
You can defrost food in several ways:
-In the fridge compartment
-In the microwave
-In the oven/fan-assisted oven
-At room temperature
uTake out only as much food as necessary.
5.2.3 Freezer tray
You can freeze berries, herbs, vegetables and other small
frozen food in the freezer tray without it all freezing
together. The frozen food is less likely to get squashed and
subsequent portioning is easier.
In addition, you can store the cold storage accumulators in
the freezer tray to save space.
uDistribute food on the freezer tray without packaging and
well spaced out.
5.3 Storage times
The storage times given are guidelines
Food with a “use by” date must still be consumed by the
date indicated on the package
Guidelines for storage periods for various foods
Ice cream at -18 °C 2 to 6 months
Sausage, ham at -18 °C 2 to 3 months
Bread, bakery prod‐
ucts
at -18 °C 2 to 6 months
Game, pork at -18 °C 6 to 9 months
Fish, fatty at -18 °C 2 to 6 months
Fish, lean at -18 °C 6 to 8 months
Cheese at -18 °C 2 to 6 months
Poultry, beef at -18 °C 6 to 12 months
Vegetables, fruit at -18 °C 6 to 12 months
6 Energy saving
-Always ensure good ventilation. Do not obstruct ventila‐
tion openings or grilles.
-Never block air slits in the fan.
Energy saving
8 * Depending on model and options
-Do not install the appliance in direct sunlight or next to a
stove, heater or similar heat source.
-Energy consumption depends on installation conditions
such as the ambient temperature (see 1.4 Range of appli‐
ance use) . A warmer ambient temperature can increase
the energy consumption.
-Avoid opening the appliance door for any longer then
necessary
-The lower the temperature is set the higher the energy
consumption.
-All food stored in the appliance should be well wrapped
and covered. This prevents frost buildup.
-Insertion of warm foods: first let the food cool down to
room temperature.
7 Use
7.1 Controls and displays
7.1.1 Status display
Fig. 6
(1) Temperature display
The Status display shows the set temperatures and is the
home display. From there, you can navigate to the options
and settings.
7.1.2 Display symbols
The display symbols provide information about the current
appliance status.
Symbol Appliance status
Standby
The appliance or temperature zone
is turned off.
Flashing number
Appliance is working. Temperature
flashes until the set temperature is
reached.
Flashing symbol
Appliance is working. Setting is
made.
7.2 Appliance functions
7.2.1 Notes on the appliance functions
The appliance functions are set at the factory so that your
appliance is fully functional.
Before you alter, activate or deactivate the appliance func‐
tions, make sure that the following requirements are met:
qYou have read and understood the descriptions of how
the display works.
qYou have familiarized yourself with the operating and
display elements of your appliance.
Turn off appliance
This setting turns off the whole appliance.
Switch off whole appliance
Fig. 7
Fig. 8
uActivating/deactivating .
wOff: Display turns black.
WiFi
Use this function to connect your appliance to WiFi. You can
then operate it via the SmartDevice app on a mobile device.
You can also use this function to disconnect or reset the
WiFi connection.
More information on the SmartDevice: (see 1.3 SmartDevice)
Note
The SmartDevice function is not available in the following
countries: Russia, Belarus, Kazakhstan.
Establishing the WiFi connection for the first time
Make sure that the following requirements are fulfilled:
qYou have installed the SmartDevice app (see
apps.home.liebherr.com).
qRegistration in the SmartDevice app is completed.
Fig. 9
WiFi
On Off Re
WiFi
fo On Of
Fig. 10
uCarry out action steps according to the illustration.
Use
* Depending on model and options 9
wConnection is established.
Disconnecting from the WiFi
Fig. 11
Fig. 12
uCarry out action steps according to the illustration.
wThere is no connection.
Resetting the WiFi connection
Fig. 13
Fig. 14
uCarry out action steps according to the illustration.
wWiFi connection and other WiFi settings are reset to
factory settings.
Showing information about the WiFi connection
Fig. 15
Fig. 16 *
uCarry out action steps according to the illustration.
Temperature
Use this function to set the temperature.
The temperature depends on the following factors:
-How often the door is opened
-How long the door is open for
-The room temperature of the installation site
-The type, temperature and amount of food
Freezer compartment Recommended setting
-18 °C
Setting the temperature
Fig. 17
uCarry out action steps according to the illustration.
wTemperature is set.
Temperature unit
This setting allows you to change between Celsius and
Fahrenheit as the temperature unit.
Selecting the setting value
uSet the value .
Use
10 * Depending on model and options
SuperFrost
Select this function for the maximum freezing setting, to
reach lower freezing temperatures.
Use:
-To freeze more than 2 kg fresh food a day.
-Freezing fresh food quickly to the core.
-Increasing the cold reserves in the stored goods before
defrosting the appliance.
Activating/deactivating settings
With a small volume of frozen goods:
uActivate 6 hours before use.
With the maximum volume of frozen goods:
uActivate 24 hours before use.
uActivating/deactivating .
-or-
uActivate/deactivate using the SmartDevice app.
The function automatically turns off. The appliance goes
back to normal mode. The temperature adjusts itself to the
set level.
PartyMode
This option offers an assortment of special functions and
settings that are useful if you are having a party.
The following functions are activated:
-SuperFrost
You can set any functions you like. Your changes are lost
when the option is switched off.
Activating/deactivating settings
uActivating/deactivating .
wOn: All functions are activated at the same time.
wDeactivated: Previously set temperatures are restored.
The function is automatically switched off after 24 hours.
SabbathMode
With this function you can activate or deactivate the
SabbathMode. If you activate this function, some electronic
functions will be switched off. This allows your device to
meet religious requirements on Jewish holidays such as the
Sabbath and comply with STAR-K Kosher certification.
Appliance status with active SabbathMode
The status display continuously shows SabbathMode.
All functions in the display except the Deactivate
SabbathMode function are locked.
Active functions remain active.
The display stays lit when you close the door.
The interior lighting is switched off.
Reminders are disabled. The set time intervals are paused.
Reminders and warnings are not displayed.
There is no door alarm.
There is no temperature alarm.
The defrost cycle only works for the specified time without
taking account of appliance use.
Appliance status with active SabbathMode
After a power failure, the appliance returns to
SabbathMode.
Appliance status
Note
This appliance has certification from the “Institute for
Science and Halacha”. (www.machonhalacha.co.il)
You can find a list of STAR-K-certified appliances at
www.star-k.org/appliances.
Activating SabbathMode
WARNING
Danger of poisoning from spoiled food!
If you have SabbathMode activated and a power failure
occurs, no message appears in the status display about the
power failure. Once the power is restored, the appliance
continues to operate in SabbathMode. The power failure
may mean that food spoils and the consumption of this food
could lead to food poisoning.
After a power failure:
uDo not consume food that has been frozen and thawed.
Fig. 18
Fig. 19
uCarry out action steps according to the illustration.
wSabbathMode is activated.
wStatus display continuously shows SabbathMode.
Deactivating SabbathMode
Fig. 20
uCarry out action steps according to the illustration.
wSabbathMode is deactivated.
EnergySaver
This function activates or deactivates the energy-saving
mode. When you activate this function, the energy
consumption decreases and the temperature increases by
2 °C in the appliance. The food remains fresh, but the shelf
life is shortened.
Temperature zone Recommended
setting
Temperature when
EnergySaver activated
-18 °C -16 °C
Temperatures
Use
* Depending on model and options 11
Activating EnergySaver
Fig. 21
Fig. 22
uCarry out action steps according to the illustration.
wEnergy-saving mode is activated.
Deactivating EnergySaver
Fig. 23
Fig. 24
uCarry out action steps according to the illustration.
wEnergy-saving mode is deactivated.
Display brightness
With this setting, you can choose a brightness level for the
display.
You can set the following brightness levels:
-40%
-60%
-80%
-100%
Choosing the setting
uSet the level .
Door alarm
Set the time before the door alarm (see Close the door)
sounds.
Options are as follows:
-1 min
-2 min
-3 min
-Off
Choosing the setting
uSet the level (see 7.3 Error messages) .
Entry lock
This setting avoids accidental operation of the appliance,
e.g. by children.
Use:
-Avoid unintentional changing of settings and functions.
-Avoid unintentional switching off of the appliance.
-Avoid unintentional temperature adjustments.
Activating/deactivating settings
uActivating/deactivating .
Language
This setting lets you choose the language of the display.
Choose from the following languages:
-German
-English
-French
-Spanish
-Italian
-Dutch
-Czech
-Polish
-Portuguese
-Russian
-Chinese
Activating/deactivating settings
uActivating/deactivating .
Info
This setting allows the appliance information to be read out
as well as access to the customer menu.
It provides the following information:
-Model name
-Index
-Serial number
-Service number
View appliance data
uSwipe in the display until Settings appears.
uConfirm the display.
uSwipe in the display until About appears.
uRead the appliance data.
Demo mode
Demo mode is a special feature for dealers who want to
demonstrate appliance features. If you activate demo mode,
all refrigeration functions are deactivated.
If you switch on your appliance and “Demo” appears in the
status display, then demo mode is already activated.
If you activate and then deactivate demo mode, the appli‐
ance will be reset to factory defaults. (see Reset)
Use
12 * Depending on model and options
Activating demo mode
Fig. 25
Fig. 26
uCarry out action steps according to the illustration.
wDemo mode is activated.
wAppliance is switched off.
uSwitch on the appliance. (see 4.1 Switching on appliance
(first use))
w“DEMO” appears in the status display.
Deactivating demo mode
Fig. 27
Fig. 28
uCarry out action steps according to the illustration.
wDemo mode is deactivated.
wAppliance is switched off.
uSwitch on the appliance. (see 4.1 Switching on appliance
(first use))
wAppliance is reset to factory settings.
Reset
This function resets all settings to the factory settings. All
settings that you have made thus far will be reset to their
original values.
Activate the setting
uActivating .
7.3 Error messages
Error messages appear in the display. There are two catego‐
ries of error message:
Category Meaning
Message Reminder of general procedures. You can carry
out these procedures to eliminate the message.
Warning Appears when there are malfunctions. A signal
sounds in addition to the display. The signal
becomes louder until you acknowledge by
tapping the display. You can eliminate simple
defects yourself. For more serious defects, you
must contact customer service.
7.3.1 Warnings
Close the door
This message appears if the door is open too long.
You can set the time before this message appears .
uStop alarm: Confirm the message.
-or-
Use
* Depending on model and options 13
uClose the door.
Power failure.
This message appears if the freezer temperature rises after
a power outage. When the power outage is over, the appli‐
ance will continue to operate at the last temperature
setting.
uStop alarm: Confirm the message.
wTemperature alarm appears (see Temperature alarm) .
Temperature alarm
This message appears if the temperature does not match
the set temperature.
Temperature differences may be caused by:
-Hot fresh food was placed in the appliance.
-When sorting and removing food from the appliance, too
much warm ambient air got in.
-There has been a prolonged power outage.
-The appliance is faulty.
When the cause is eliminated, the appliance will continue to
operate at the last temperature setting.
uConfirm the display.
wWarmest temperature is displayed.
uConfirm the display again.
wThe status display is displayed.
wCurrent temperature is displayed.
Error
This message appears when there is a fault with the appli‐
ance. An appliance component has an error.
uOpen the door.
uTake note of the error code.
uConfirm the message.
wThe signal tone stops.
wThe status display appears.
uClose the door.
uContact customer service. (see 10.4 Customer Service)
8 Equipment
8.1 Drawers
You can remove the drawers for cleaning.
You can remove the drawers to use VarioSpace.
The way to remove/insert the drawers varies depending on
the pull-out system. Your appliance can contain a variety of
pull-out systems.
Note
Insufficient ventilation results in an increase in energy
consumption and reduction of the refrigerating perform‐
ance.
uLeave the bottom drawer in appliance!
uNever obstruct the vents on the interior rear wall!
8.1.1 Drawer on appliance base or glass shelf
The drawer runs directly on the appliance base or on a glass
shelf. There are no rails.
When you remove the drawers, you can use the glass
shelves below them as storage shelves.
Removing drawer
Fig. 29
uRemove drawer as shown in the diagram.
Inserting drawer
Fig. 30
uInsert drawer as shown in the diagram.
8.1.2 Top tilting drawer*
When you pull out the top drawer, it tilts forward. This gives
you a better view into the drawer. The function depends on
the height of the appliance.
When you remove the upper tilting drawer, you can use the
glass shelf below it as a storage shelf.
Removing drawer
Fig. 31
uPull out drawer as far as it will go.
uLift drawer at the front and simultaneously push up at
the back from below.
uRemove drawer to the front.
Inserting drawer
Fig. 32
uPlace on the drawer as shown in the diagram.
wThe drawer rests on the glass panel.
uLift drawer slightly from below at the back and slide over
the lip.
uSlide in drawer to the back.
8.1.3 Drawer on molded rib
The drawer runs directly on the molded rib. There are no
rails.
Equipment
14 * Depending on model and options
Removing drawer
Fig. 33
uPull out drawer as far as it will go.
uLift drawer at the front. Fig. 33 (1)
uRemove drawer to the front. Fig. 33 (2)
Inserting drawer
Fig. 34
uPlace drawer at an angle behind the stoppers on the
molded rib. (see Fig. 34)
uLower drawer.
uSlide in drawer to the back.
8.2 Glass shelves
You can remove the glass shelf under the drawers for
cleaning.
You can remove the glass shelf under the drawers to use
VarioSpace.
8.2.1 Removing / inserting the glass shelf
under the tilting drawer*
The glass shelf is located under the top tilting drawer.
Make sure that the following requirements are fulfilled:
qDrawer has been removed. (see 8.1.2 Top tilting drawer*)
Removing glass shelf
Fig. 35 Tilting drawer glass shelf
uPress the glass shelf upwards from below on both sides.
(see Fig. 35)
uRemove the glass shelf to the front.
Inserting glass shelf
Fig. 36 Tilting drawer glass shelf
uPosition glass shelf at an angle behind the stoppers. (see
Fig. 36)
uLower glass shelf.
uSlide in glass shelf to the back.
wGlass shelf clicks into place.
8.2.2 Removing / inserting the glass shelf
Depending on the equipment, the glass shelf may be
located under the drawer.*
Make sure that the following requirements are fulfilled:
qGlass shelf under the drawer: Drawer has been removed.
(see 8.1 Drawers)
Removing glass shelf
Fig. 37 Example illustration of glass shelf
uLift glass shelf at the front. Fig. 37 (1)
uRemove glass shelf to the front. Fig. 37 (2)
Inserting the glass shelf
Fig. 38 Example illustration of glass shelf
uPosition glass shelf at an angle behind the stoppers. (see
Fig. 38)
uLower glass shelf.
uSlide in glass shelf to the back.
Equipment
* Depending on model and options 15
8.3 VarioSpace
Fig. 39
You can remove drawers and glass panels from your appli‐
ance. This provides more room for large food items such as
poultry, joints of meat, large game and bulky baked goods.
You can then freeze these items whole for later preparation.
uNote the load limits on the drawers and glass panels
(see 10.1 Technical specifications) .
8.4 Freezer packs
The freezer packs prevent the temperature from rising too
fast in the event of a power failure.
The freezer packs are in the drawer.
You can store the cold storage accumulators in the freezer
tray.
8.4.1 Using the freezer packs
Fig. 40
When the freezer packs are fully frozen:
uPlace on the frozen goods in the top, front part of the
freezer.
8.5 Ice cube tray with lid
8.5.1 Using the ice cube tray
Fig. 41
When water is frozen:
uHold the ice cube tray briefly under warm water.
uRemove the lid.
uGently turn the ends of the ice cube tray in opposite
directions.
uRelease the ice cubes.
8.5.2 Dismantling the ice cube tray
You can dismantle the ice cube tray for cleaning.
Fig. 42
uDisassemble the ice cube tray.
9 Maintenance
9.1 Disassembling / assembling pull-
out systems
9.1.1 Notes on disassembly
You can disassemble some of the pull-out systems for
cleaning. Your appliance can contain a variety of pull-out
systems.
The following pull-out systems can be disassembled or
cannot be disassembled:
Pull-out system can be disassembled /
cannot be disassembled
Drawer on appliance
base or glass shelf
cannot be disassembled
Top tilting drawer* can be disassembled (see 9.1.2 Top
tilting drawer*) *
Drawer on molded
rib
can be disassembled
(see 9.1.3 Drawer on molded rib)
9.1.2 Top tilting drawer*
Disassembling pull-out system
Make sure that the following requirements are fulfilled:
qDrawer has been removed. (see 8.1.2 Top tilting drawer*)
qGlass shelf has been removed. (see 8.2 Glass shelves)
Fig. 43 Glass shelf with side parts
uRemove side part from glass shelf sideways.
Installing pull-out system
Fig. 44 Glass shelf with side parts
Maintenance
16 * Depending on model and options
uPlace on side part at the back.
uPress side part onto glass shelf at the front.
9.1.3 Drawer on molded rib
Disassembling pull-out system
Make sure that the following requirements are fulfilled:
qDrawer has been removed. (see 8.1.3 Drawer on molded
rib)
Fig. 45 Attachment on the right molded rib
uGrab attachment at the back from below.
uPull off attachment at the back sideways. Fig. 45 (1)
uPull off attachment at the front sideways. Fig. 45 (2)
Installing pull-out system
Fig. 46 Comparing attachments
There are two different attachments in the appliance. The
attachment above the lowest drawer Fig. 46 (2) has a three-
cornered edge. All other attachments Fig. 46 (1) have a
straight edge.
uFit attachment Fig. 46 (2) with the three-cornered edge
above the lowest drawer.
uFit attachment Fig. 46 (1) with straight edge in all other
positions.
Fig. 47 Attachment on the right molded rib
uPosition attachment on molded rib at the front. Fig. 47 (1)
uPress on attachment at the back. Fig. 47 (2)
9.2 Defrosting the appliance
9.2.1 Defrosting with NoFrost
Defrosting is performed automatically by the NoFrost
system. The moisture condenses on the evaporator and is
periodically defrosted and evaporated.
The appliance does not have to be defrosted.
9.3 Cleaning the appliance
9.3.1 Preparation
WARNING
Danger of electric shock.
uUnplug refrigerator or disconnect power.
WARNING
Danger of fire
uDo not damage the refrigerant circuit.
uEmpty appliance.
uPull out the power plug.
9.3.2 Cleaning the interior
NOTICE
Improper cleaning!
Damage to the appliance.
uOnly use soft cleaning cloths and ph-neutral all-purpose
cleaners.
uDo not use steel wool or sponges that scour or scratch.
uDo not use caustic or abrasive cleaning materials or
those containing sand, chloride, or acids.
uPlastic surfaces: clean by hand with a soft clean cloth,
lukewarm water and a little detergent.
uMetal surfaces: clean by hand with a soft clean cloth,
lukewarm water and a little detergent.
9.3.3 Cleaning the equipment
NOTICE
Improper cleaning!
Damage to the appliance.
uOnly use soft cleaning cloths and ph-neutral all-purpose
cleaners.
uDo not use steel wool or sponges that scour or scratch.
uDo not use caustic or abrasive cleaning materials or
those containing sand, chloride, or acids.
Clean with a soft, clean cloth, lukewarm water and a little
washing up liquid:
- Drawer
- Freezer tray
Clean in the dishwasher up to 60 °C:
- Ice cube tray
uDisassemble the equipment: see the relevant section.
uClean the equipment.
9.3.4 After cleaning
uWipe dry the appliance and items of equipment
uConnect and switch on the appliance.
uActivate SuperFrost (see 7.2 Appliance functions) .
When the temperature is sufficiently cold
uPlace the food inside.
uRepeat cleaning regularly.
Maintenance
* Depending on model and options 17
10 Customer support
10.1 Technical specifications
Temperature zone
Freezing -28 °C to -15 °C
Maximum freezing quantity/24 h
Freezer See “Freezing capacity …/24 h” on
the type plate
Max. equipment capacity
Equipment Appliance
width
550 mm
(see instal‐
lation
instruc‐
tions,
appliance
dimen‐
sions)
Appliance
width
600 mm
(see
installa‐
tion
instruc‐
tions,
appliance
dimen‐
sions)
Appliance
width
700 mm
(see instal‐
lation
instruc‐
tions, appli‐
ance
dimen‐
sions)
Drawer on glass
shelf
(see 8.1.1 Drawer
on appliance base
or glass shelf)
12 kg 15 kg --
Drawer on molded
rib
(see 8.1.3 Drawer
on molded rib)
14 kg 19 kg 19 kg
Lighting
Energy efficiency class1Light source
This product contains one or more energy
efficiency class G light sources.
LED
1 The appliance may contain light sources with different
energy efficiency classes. The lowest energy efficiency class
is indicated.
For appliances with a WiFi connection:
Frequency specification
Frequency band 2.4 GHz
Maximum radiated
power
< 100 mW
Purpose of the
wireless equipment
Integration in the local WiFi network
for data communication
10.2 Operating noises
The appliance makes noises while in operation.
-At less cooling output the appliance saves energy but
takes longer to cool items. The volume is lower.
-At a higher cooling output the food cools more quickly.
The volume is higher.
Examples:
•Activated functions (see 7.2 Appliance functions)
•Running fan
•Freshly sorted food
•High ambient temperature
•Door opened for long periods
Noise Possible cause Type of noise
Bubbling and
splashing
Coolant is flowing
into the cooling
circuit.
Normal noise
Spitting and
hissing
Coolant is spraying
into the cooling
circuit.
Normal noise
Humming The appliance
cools. The volume
depends on the
cooling output.
Normal noise
Sipping noises The self-closing
door is being
opened and
closed.
Normal noise
Whirring and
murmuring
The fan is running. Normal operating
noise
Clicking Components are
being switched on
and off.
Normal switching
noise
Rattling or
humming
Valves are active. Normal switching
noise
Noise Possible
cause
Type of noise How to
resolve
Vibration Unsuitable
installation
Error noise Check instal‐
lation.
Set up the
appliance.
Clattering Equipment,
Objects
inside the
appliance
Error noise Secure
equipment
parts.
Leave a gap
between
items.
10.3 Technical faults
Your appliance is designed and manufactured for reliable
operation and a long service life. If a malfunction nonethe‐
less occurs during operation, please check whether the
malfunction is due to an operating error. In this case, you
will have to be charged for the costs incurred, even during
the warranty period.
You may be able to rectify the following faults yourself.
10.3.1 Appliance function
Defect Cause Remedy
→ The appliance is not switched on. uSwitch on the appliance.
Customer support
18 * Depending on model and options
Defect Cause Remedy
The appliance does
not work. →The power plug is not properly
inserted in the wall socket.
uCheck the power plug.
→The powerfuse in the wall socket is
not OK.
uCheck the fuse.
→ Power failure. uKeep the appliance closed.
uProtect your food: Lay freezer packs on top of the food or
use another freezer if the power is off for a prolonged
period.
uDo not re-freeze defrosted food.
→The appliance connector is not
correctly inserted in the appliance.
uCheck the appliance connector.
The temperature is
not cold enough
→This means that the door of the
appliance is not closed properly
uClose the appliance door
→ Insufficient ventilation uClear and clean the ventilation grille.
→The ambient temperature is too
high
uSolution: (see 1.4 Range of appliance use) .
→The appliance was opened too
frequently or for too long
uWait to see if the required temperature corrects itself. If
not, contact Customer Service. (see 10.4 Customer
Service)
→Too much fresh food was placed
inside without SuperFrost.
uSolution: (see SuperFrost)
→ The temperature is incorrectly set uSet to a colder temperature and check after 24 hours.
→The appliance is too near to a heat
source (stove, heater etc).
uChange location of appliance or the heat source.
→The appliance was not properly
installed in the recess.
uMake sure the appliance was installed correctly and the
door closes properly.
The door seal is
defective or should
be replaced for
other reasons.
→The door seal is interchangeable.
You can replace it without the use
of any special tools.
uContact Customer Service. (see 10.4 Customer Service)
The appliance is
iced up or conden‐
sation is building.
→The door seal may have slipped out
of its groove.
uCheck the door seal is well placed in the groove.
10.3.2 Equipment
Defect Cause Remedy
The interior light
does not turn on.
→ The appliance is not switched on. uSwitch on the appliance.
→The door was open for longer than
15 min.
uThe interior light automatically switches itself off if the
door stays open for approx. 15 min.
→The LED interior light is faulty or
the lid is damaged.
uContact Customer Service. (see 10.4 Customer Service)
10.4 Customer Service
First check whether you can rectify the fault yourself
(see 10 Customer support) . If you cannot rectify the
problem, contact Customer Service.
You can find the address in the enclosed brochure “Liebherr-
Service” or at home.liebherr.com/service.
Customer support
* Depending on model and options 19
WARNING
Unprofessional repair!
Injuries.
uRepairs and work on the appliance and the power supply
cable not described in the Manual (see 9 Maintenance)
should only be carried out by a qualified service provider.
uA damaged power cable may only be replaced by the
manufacturer, the manufacturer’s Customer Service or a
similarly qualified person.
uFor appliances with an IEC connector, the change can be
made by the customer.
10.4.1 Contacting Customer Service
Make sure that the following appliance information is avail‐
able:
qAppliance name (model and index)
qService no. (service)
qSerial no. (S no.)
uCall up the appliance information via the display. (see
Info)
-or-
uRefer to the type plate for appliance information.
(see 10.5 Rating plate)
uTake note of the appliance information.
uNotify customer service: Report errors and the appliance
information.
wThis will help us give you fast and accurate support.
uFollow further instructions from Customer Service.
10.5 Rating plate
The nameplate is located behind the drawers on the inside
of the appliance.
Fig. 48
(1) Appliance name (3) Serial no.
(2) Service no.
uInformation from the nameplate.
11 Decommissioning
uEmpty appliance.
uSwitch off appliance. (see Turn off appliance)
uPull out the power plug.
uRemove the appliance connector if necessary: Pull it out
and, at the same time, move it from the left to the right.
uClean appliance. (see 9.3 Cleaning the appliance)
uLeave the door open to prevent bad smells
12 Disposal
12.1 Preparing appliance for disposal
Liebherr uses batteries in some of its appli‐
ances. In the EU, for environmental reasons,
legislation obliges the end user to remove
these batteries before disposing of the old
appliances. If your appliance contains
batteries, a corresponding notice is attached to
the appliance.
Lamps If you can remove the lamps yourself without
destroying them, also remove these before
disposal.
uTake the appliance out of operation.
uAppliance with batteries: Remove the batteries. For
description, see Maintenance chapter.
uIf possible: Remove lamps without destroying them.
12.2 Disposing of the appliance in an
environmentally friendly manner
The appliance still contains
valuable materials and must be
collected separately from
unsorted municipal waste so it
can be recycled.
Dispose of batteries separately
from the old appliance. You can
do this by returning the
batteries free of charge to
retailers or taking them to recy‐
cling centers and collection
centers for recyclable materials.
Lamps Dispose of removed lamps via
the respective collection
systems.
For Germany: You can dispose of the appli‐
ance free of charge via the class
1 collection containers at the
local recycling and recyclable
material collection centers.
When purchasing a new fridge/
freezer, if the sales area > 400
m2, retailers will also take back
the old appliance free of charge.
WARNING
Leaking refrigerant and oil!
Fire. The refrigerant contained within the appliance is envi‐
ronmentally friendly, but flammable. The oil contained
within the appliance is flammable. Escaping refrigerant and
oil can ignite if they are of high enough concentration and
are exposed to an external heat source.
uDo not damage the pipelines of the coolant circuit and
the compressor.
uTransport the appliance away without damaging it.
uDispose of batteries, lamps, and the appliance according
to the above specifications.
Decommissioning
20 * Depending on model and options
Page is loading ...
Page is loading ...
/