iogear GDPVGAW6 Datasheet

Brand: iogear

Model: GDPVGAW6

Category: Cable interface/gender adapters

Type: Datasheet

iogear GDPVGAW6 is a DisplayPort to VGA adapter cable that allows you to connect your DisplayPort Apple® iMac® or MacBook® to an external VGA projector or monitor. The cable supports resolutions up to 1920 x 1200, providing high-quality picture and video. It is also compliant with Displayport Specification 1.1a for both 1.62 Gbps and 2.7 Gbps, and supports full DisplayPort link tracking. Additionally, the cable supports interrupt request output for expansion function and Deep Sleep Mode (suspend mode).

● Converts your DisplayPort to VGA so you can connect to a VGA projector, TV or monitor.

● Works with Apple®

iMac

or MacBook

● Compliant with Displayport Specification 1.1a for both 1.62 Gbps and 2.7 Gbps

●

Support full DisplayPort link tracking

● Support resolutions:

❍

Full HD 1080p

❍ 1920x1200

❍ VGA, SVGA, XGA, SXGA and UXGA at 162 MHz pixel rate

● Support interrupt request ouptut for expansion function

●

Support Deep Sleep Mode (suspend mode)

IOGEAR's DisplayPort to VGA adapter cable allows you to connect your DisplayPort Apple®

iMac

or MacBook

® to an external VGA projector or monitor with support up to 1920 x 1200 high

resolution for high-quality picture and video.

DisplayPort to VGA Adapter Cable

GDPVGAW6

Specifications

●

Input

● 1 x Display Port Source

●

Output

● 1 x Projector or Display with VGA Port

Product Requirements

● 1 x DisplayPort to VGA adapter cable

Package Contents

Function

GDPVGAW6

Dimensions

GDPVGAW6

Unit Dimensions

Height

1.47"

Depth

0.59"

Length

7.28"

Inner Pack

Width

8.7"

Height

9.4"

Depth

4.3"

Inner Pack Qty.

Unit Package Dimensions

Width

3.9"

Height

10.4"

Depth

0.59"

Master Carton

Width

10.4"

Height

18.5"

Depth

9.6"

Master Carton Qty.

Weight

Master Carton Wt.

6.5 lbs

Inner Pack Wt.

1.25 lb

Unit Pack Wt.

0.1 lb

Unit Wt.

0.05 lb

www.IOGEAR.com

19641 Da Vinci, Foothill Ranch, CA 92610

GDPVGAW6

2013 IOGEAR

IOGEAR, the IOGEAR logo, are trademarks or registered trademarks of IOGEAR. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other brand and product names are trademarks or

registered trademarks of their respective holders.

IOGEAR makes no warranty of any kind with regards to the information presented in this document. All information furnished here is for informational

purposes only and is subject to change without notice. IOGEAR assumes no responsibility for any inaccuracies or

errors that may appear in this document.

DisplayPort to VGA Adapter Cable