VPM140-S
VPM235-S VPM235W-S
TECHNICAL SPECIFICATION VERTICAL PROJECTOR MOUNT
Article Colour Length Extention Swivel Horizontal Load Net/Gross L x W x H Net/Gross L x W x H
number arm (mm) (deg) Vertical tilt Capac. per unit per unit box box/10 pcs
(mm) (deg) (kg) (kg) (mm) (kg) (mm)
VPM140-S Silver 140 - 360
˚ 30˚ 15 1,3/1,4 243x216x95 14,0/15,0 (10 pcs) 490x445x260
VPM140-B Black 140 - 360
˚ 30˚ 15 1,3/1,4 243x216x95 14,0/15,0 (10 pcs) 490x445x260
VPM140-W White 140 - 360
˚ 30˚ 15 1,3/1,4 243x216x95 14,0/15,0 (10 pcs) 490x445x260
VPM235-S Silver 235 235-310 360
˚ 30˚ 15 1,6/1,7 197x188x72 17,0/18,0 (10 pcs) 390x380x220
VPM235W-S Silver 235 235-310
360˚ 30 15 1,7/1,8 243x216x85 10,0/9,0 (5 pcs) 450x260x235
Product information/Technical specification
VPM-Series, published 2008-11-21
VERTICAL PROJECTOR MOUNT
VERTICAL is a series of universal mounts for projectors. The mounts are either mounted in
the ceiling or on the wall depending on model. Modern design and simple mounting makes the
mounts a nice and affordable alternative.
MATERIAL/COLOUR
The metalparts are made of steel and aluminum. The colour is
silver, but the short mounts (VPM140) are also avalible in white or
black. The plastic parts are black and made of ABS-plastic.
UNIVERSAL MOUNT
The mounts are universal and fits most of the projectors on the
market, except CRT-projectors.
CEILING MOUNTS (VPM140/VPM235)
Fasten to the ceiling with the attached screws. Use the right
mounting material depending on the foundation.
WALL MOUNTS (VPM235W)
This mount extends the projector out from the wall. Fasten to the
wall with the attached screw. Use the right mounting material
depending on the foundation.
LOADING CAPACITY
The mounts are tested for weights up to 15 kg.
SECURITY
The longer mounts (VPM235/VPM235W) are extendable and provided
with a security system that prevents the extension arm from being taken
apart. This function prevents the projector from falling down and it also
causes a delay for the thief.
CABLE MANAGEMENT
On the longer mounts (VPM235/VPM235W) there is an integrated cable
management. You can hide your cables to/from the projector in order to
have a nice and clean installation.
ATTACHING THE PROJECTOR
The most common screws that are used to attach the projector to the
mount are included in the accessorie pack (M3, M4, M5 and M6 screws).
SWIVEL ADJUSTMENT
Swivel is the term for how many degrees you can turn the projector around
it´s ”own” axle.
HORIZONTAL/VERTICAL TILT
Tilt is the term for how much you can adjust the projector sideways and
up/down.
For more information: www.kingpinscreens.com
/