Tripp Lite N201-020-RD is a Cat6 Gigabit Snagless Molded Patch Cable (RJ45 M/M) in red, with a length of 20 ft. It meets Category 6 cabling standards and most current industry standards, including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801, and ETL (Category 6, draft 11). The cable drastically reduces impedance and structural return loss compared to standard 100 MHz wire, and its snagless boots protect the locking tabs on the RJ45 connectors from being damaged during installation.
Tripp Lite N201-020-RD is a Cat6 Gigabit Snagless Molded Patch Cable (RJ45 M/M) in red, with a length of 20 ft. It meets Category 6 cabling standards and most current industry standards, including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801, and ETL (Category 6, draft 11). The cable drastically reduces impedance and structural return loss compared to standard 100 MHz wire, and its snagless boots protect the locking tabs on the RJ45 connectors from being damaged during installation.
Tripp Lite N201-020-RD is a Cat6 Gigabit Snagless Molded Patch Cable (RJ45 M/M) in red, with a length of 20 ft. It meets Category 6 cabling standards and most current industry standards, including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801, and ETL (Category 6, draft 11). The cable drastically reduces impedance and structural return loss compared to standard 100 MHz wire, and its snagless boots protect the locking tabs on the RJ45 connectors from being damaged during installation.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI