Cary Audio Design Cinema 11a User manual

Brand: Cary Audio Design

Model: Cinema 11a

Category: AV receivers

Type: User manual

This manual is also suitable for

OWNER’S MANUAL

ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo

NOTE: Before installing your new component, please read this manual carefully

as it will inform you of the product speciﬁ cations, proper installation and correct

operating procedures for your unit. Also included in this manual are guidelines

on how to service and care for your new Cary Audio Design product.

Cinema 11a

HD Surround Sound Processor

TABLE OF CONTENTS

Important Safety Instructions .......................................................... 3

Welcome

Thank You ............................................................................................ 6

Product Features ................................................................................... 7

Unpacking and Installation ..................................................................... 8

Format Descriptions ............................................................................... 8

Specifications

Audio Inputs / Audio Outputs ............................................................... 13

Analog Audio Section ........................................................................... 13

Digital Audio .........................................................................................14

Main Path .............................................................................................14

Zone 2 Paths......................................................................................... 15

Control .................................................................................................16

Power Requirements..............................................................................16

Controls & Displays

Front Panel ......................................................................................... 17

Rear Panel........................................................................................... 19

Remote Control.................................................................................... 21

Zone 2 Remote Control......................................................................... 23

Installation

Location .............................................................................................. 24

Getting Started..................................................................................... 24

Connecting a Multi Channel Power Amplifier .......................................... 25

Second Zone (Zone 2) ......................................................................... 26

Power Control Connections ................................................................... 26

Remote Control ................................................................................... 26

Power Connection ................................................................................. 26

Auto Sound Setup

How to Perform Auto Sound Setup..........................................................27

Speaker Check .................................................................................... 28

Set Distance ........................................................................................ 29

Set Balance ......................................................................................... 29

Set Room EQ ...................................................................................... 29

Set Crossover Points ............................................................................ 30

Set Speaker Phase ............................................................................... 30

Manual Sound Setup

Set Speaker Configuration...................................................................... 31

Set Distance..................................................................................................32

Set Balance...................................................................................................33

Set Channel Levels Using the Test Tone Function ....................................34

Set Crossover Points......................................................................................34

Set Acoustic Calibration Room EQ .......................................................... 35

Setup Menu

Set Speaker Phase................................................................................. 37

Input.................................................................................................... 37

Assigned Inputs.....................................................................................38

Change Input Names............................................................................. 38

Set Analog IN Level Settings .................................................................. 39

Set Analog IN Configuration...................................................................40

Set HDMI IN Audio..........................................................................41

Listening to the Radio......................................................................42

Connection Chart ............................................................................43

Zone 2 ...........................................................................................44

TABLE OF CONTENTS

Set Zone 2 Input.............................................................................44

Set Zone 2 Volume..........................................................................44

Advanced Settings ................................................................................45

Set Password ........................................................................................45

HDMI Audio Out.................................................................................... 46

AV Sync Delay....................................................................................... 46

Bright................................................................................................... 46

Edit Custom Name................................................................................. 46

Set Infrared Remote (IR) Controls ..........................................................47

Set Triggers ..........................................................................................48

Set Auto Input Seek ..............................................................................48

Set Late Mode for Dolby Digital ..............................................................48

Set Restore Default................................................................................ 49

Service and Care

Care and Cleaning ............................................................................... 50

Factory Service .................................................................................... 50

Non-Warranty Repairs .......................................................................... 50

United States Limited Warranty ........................................................... 51

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire or electric shock, do

not expose this appliance to rain or moisture. The lightning

flash with arrowhead symbol within an equilateral triangle is

intended to alert the user to the presence of un-insulated

dangerous voltage within the product’s enclosure that may

be of sufficient magnitude to constitute a risk of electric

shock to persons.

CAUTION: To reduce the risk of electric shock, do not remove the cover. There are no user serviceable parts inside.

Please refer to qualified personnel for service.

ALERT: The exclamation point within an equilateral triangle is intended to alert the user of the presence of important

operating and maintenance (servicing) instructions in the literature accompanying the component.

1. READ ALL INSTRUCTIONS: All the safety and operating instructions of your Cary Audio equipment should be read

before power is applied to the equipment.

2. RETAIN OWNER'S MANUAL: These safety and operating instructions should be retained for future reference.

3. HEED WARNING: All warnings on the unit and in the operating instructions should be adhered to.

4. FOLLOW INSTRUCTIONS: All operating and use instructions should be followed.

5. CLEANING: Unplug the unit from the wall outlet before cleaning. The unit should be cleaned only as recommended

by the manufacturer.

6. ATTACHMENTS: Do not use attachments not recommended by the unit manufacturer as they may cause hazards.

7. WATER AND MOISTURE: Do not use the unit near water - for example, near a bath tub, wash bowl, kitchen sink,

or laundry tub; in a wet basement; or near a swimming pool.

8. ACCESSORIES: Do not place the unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall,

causing serious injury to a child, an adult, or damage to the unit. Mounting of the unit should follow the

manufacturer's instructions and should use a mounting accessory recommended by the manufacturer.

9. VENTILATION: Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the

unit and to protect it from overheating. These openings must not be blocked or covered. The top or bottom panel

openings should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. The unit should

not be installed in a built-in location such as a bookcase or rack unless proper ventilation is provided. There should

be free space of at least 6 inches (16cm) above the unit and an opening behind the unit.

10. GROUNDING OR POLARIZATION: The unit may be equipped with a polarized alternating current line plug (a

plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety

feature. If you cannot insert the plug fully into the outlet, try reversing the plug. If the plug should fail to fit, contact

a licensed electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

11. POWER SOURCES: The unit should be operated only from the type of power source indicated on the marking

label. If you are not sure of the type of power supplied to your home, consult your unit dealer or local power

company.

12. POWER CORD PROTECTION: Power supply cords should be routed so that they are unlikely to be walked on or

pinched by items placed on or against them. Pay close attention to cords where they enter a plug, or a convenience

receptacle, and the point where they exit from the unit.

13.

OUTDOOR ANTENNA GROUNDING: If an outside antenna or cable system is connected to the unit, be sure the

antenna or cable system is grounded so as to provide protection against voltage surges and built-up static charges.

Article 810 of the National Electrical Code, NSI/NFPA 70, provides information regarding proper grounding of the

mast and supporting structure, grounding of the lead-in wire to an Antenna-discharge unit, size of grounding

conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the

grounding electrode.

IMPORTANT SAFETY INSTRUCTIONS

ative.

14. LIGHTNING: For added protection for the unit during a lightning storm, or when it is left unattended and unused

for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent

damage to the unit due to lightning and power line surges.

15. POWER LINES: An outside antenna system should not be located in the vicinity of overhead power lines or other

electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside

antenna system, take extreme care to keep from touching such power lines or circuits as contact with them might be

fatal.

16. OVERLOADING: Do not overload wall outlets, extension cords, or integral convenience receptacles as this can

result in a risk of fire or electric shock.

17. OBJECT AND LIQUID ENTRY: Never push objects of any kind into the unit through openings as they may touch

dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind

on the unit.

18. SERVICING: Do not attempt to service the unit yourself as opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19. REPLACEMENT PARTS: When replacement parts are required, be sure the service technician has used

replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized

substitutions may result in fire, electric shock or other hazards.

20. SAFETY CHECK: Upon completion of any service or repairs to the unit, ask the service technician to perform safety

checks to determine that the unit is in proper operating condition.

21. WALL OR CEILING MOUNTING: The unit should be mounted to a wall or ceiling only as recommended by the

manufacturer.

22. HEAT: The unit should be situated away from heat sources such as radiators, heat registers, stoves, or other units

(including amplifiers) that produce heat.

23. IMPORTANT SAFETY NOTE: Before connecting a new component to your audio or home theater system it is

always good practice to make certain that all components are turned off, and preferably unplugged from their AC

power source. Many modern electronics products feature automatic turn-on circuits that may be activated during an

installation, causing the potential for damage to electronic components and/or speakers. Such damage is not

covered by product warranties and Cary Audio specifically disclaims responsibility for any such damage.

Power Cord: The removable power cord that is shipped with the player is specifically designed to be used with this

product. Other AC cords may be used, so consult your dealer for advice on AC power cords and high quality wire in

your system.

AC Fuse: The fuse is located inside the chassis and is not user serviceable. If power does not

come on, contact your authorized service represent

Wiring: Cables that run inside of walls should have the appropriate markings to indicate

compliance with, and listing by the UL, CSA or other standards required by the UL, CSA, NEC or your local building

code. Questions about cables inside of walls should be referred to a qualified custom installer, or a licensed

electrician or low-voltage contractor.

Do Not Open the Cabinet: There are no user serviceable components inside this product. Opening the cabinet

may present a shock hazard, and any modification to the product will void your warranty. If water or any metal

object, such as a paper clip, coin, or staple accidentally falls inside the unit, disconnect it from the AC power source

immediately and contact Cary Audio for further instructions.

24. RECORDING COPYRIGHT: Recording of copyrighted material for other than personal use is illegal without

permission of the copyright holder.

25. NOTE TO CATV SYSTEM INSTALLER: This reminder is provided to call the CATV system installer's attention to

article 820-40 of the NEC, ANSI/NFPA 70, which provides guidelines for proper grounding and, in particular, specifies

that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry

as practical.

IMPORTANT SAFETY INSTRUCTIONS

ing electrode.

26. FCC INFORMATION FOR USER:

CAUTION: ANY changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to

Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from where the receiver is connected.

27. OUTDOOR ANTENNA INSTALLATION/SAFE ANTENNA AND CABLE

CONNECTION: If an outside antenna or cable system is connected to

the equipment, be sure the antenna or cable system is grounded so as t

provide protection against built up static charges and voltage surges,

Section 810 of the national Electrical Code, ANSI/NFP A70 (in Canada,

part 1 of the Canadian Electrical Code) provides information with respec

to proper grounding of the mast and supporting structure, grounding of

the lead-in wire to an antenna discharge unit, size of grounding

conductors, location of antenna discharge unit, connection to grounding

electrodes and requirements for the ground

Keep Antenna Clear of High Voltage Power Lines or Circuits

An outside antenna system should be located well away from power lines, electric light or power circuits and where

it will never come into contact with these power sources if it should happen to fall. When installing an outside

antenna, extreme care should be taken to avoid touching power lines, circuits or other power sources as this could

be fatal. Because of the hazards involved, antenna installation should be left to a professional.

WELCOME

THANK YOU

Congratulations on becoming a Cinema 11a owner!

We, at Cary Audio Design, would like to thank you for purchasing the new Cinema 11a HD

Surround Sound Processor. The Cinema 11a is the latest generation of our award-winning

surround sound processors.

The Cinema 11a is the ultimate in surround sound processors. Utilizing the Cirrus Logic CS49700

series chipset and HDMI v1.3, the Cinema 11a has the ability to properly decode and playback

both the raw bit stream and lossless linear PCM signals from the latest high resolution formats,

including Dolby True HD, Dolby Digital Plus, DTS-HD Master Audio, and DTS-HD High Resolution

Audio. The Cinema 11a has the ability to set separate Listener Profile speaker settings for

playback of Music and Movies. The Cinema 11a uses the best available components in the audio

circuit, resulting in extraordinary sound quality, which is a trademark of Cary Audio Design

products. The Cinema 11a contains an HD radio tuner for the highest resolution signals from FM

broadcasts.

The Cinema 11a was designed for ease of use whether in normal home surround sound systems

or in more complex custom installations. It has an independent 2

zone so you can experience

surround sound in your main home theater room as well as 2

zone stereo sound in a different

location. A 2

zone separate remote handset comes standard with the Cinema 11a so control of

the input source selection in each of the two zones is at your fingertips.

All Main zone audio output connectors have 24 bit/192 kHz D/A converters operating in dual

differential mode for excellent sound quality and high dynamic range. In addition, the Cinema

11a includes 7.1 channel XLR balanced audio outputs for the Main zone if you are using a power

amplifier equipped with balanced input connections.

The Cinema 11a was designed to remain viable in a future of rapidly emerging and changing

digital technologies. It has a rear panel RS-232 serial port connector that provides for home

automation serial control, and it allows us to provide flash memory upgrades.

We firmly believe in high performance products that offer incredible value for the money. With its

leading edge technology, exceptional sound performance, and ease of use, the Cinema 11a is

without question, the highest performing surround sound processor available today.

Thank you for your continued support and enjoy your Music and Movies!

The Cary Audio Design Team

WELCOME

PRODUCT FEATURES

The Cinema 11a is designed as an “audio only” surround sound processor. With the addition of

the new Cirrus Logic CS49700 series chipset and HDMI v1.3, the new Cinema 11a has the ability

to properly decode and playback both the raw bit stream and lossless linear PCM signals from all

of the high resolution audio formats available today such as Dolby True HD, Dolby Digital Plus,

DTS HD High Resolution Audio, and DTS HD Master Audio.

In addition to the ability to properly decode and playback the high resolution formats, the Cinema

11a is also equipped with Dolby Digital Surround EX, Dolby Pro Logic II, Dolby Pro Logic IIx, dts

96/24, dts NEO:6, and dts-ES decoding.

With dual 32-bit audio digital signal processing (DSP) engines, the Cinema 11a offers

unparalleled processing power. These DSP engines perform custom Cary Audio processing such

as an auto sound setup system, CES 7.1 decoding, bass enhancement, dialog enhancement, bass

management, high-precision digital crossover, and room EQ. This processing is available at

sample rates up to 192 kHz, with 24-bit resolution to retain top performance from all input

sources and listening modes. A DSP engine is dedicated to decoding multi-channel compressed

audio sources.

10 channels 24-bit/96 kHz A/D converters can be used to convert stereo analog audio input and

7.1 analog audio input signals to digital signals, allowing the Cinema 11a to provide the benefits

of precise digital signal processing without sacrificing signal integrity. Alternatively, stereo analog

XLR or 7.1 bypass signals and 7.1 analog signals can bypass A/D conversion and internal

processing to remain in the analog domain straight to the output connectors.

The Cinema 11a offers:

• 2 HDMI v1.3 inputs and 1 HDMI v1.3 output

• 8 inputs; one balanced and seven single ended with RCA connectors; including S/PDIF

coaxial, S/PDIF optical, and analog pairs

• 7.1 channel analog audio input connections

• Analog bypass option for stereo and 7.1 channel analog audio input connectors

• Auto switching between digital and analog audio input connectors

• 24-bit/192 kHz D/A converters for all Main Zone audio channels

• Automatic and manual calibration of speaker distances and output levels

• Dual 32-bit DSP engines

• CES 7.1 decoding

• Dolby True HD, Dolby Digital Plus, Dolby Digital Surround EX, Dolby Pro Logic IIx and

Dolby Pro Logic II decoding

• DTS HD Master Audio, DTS HD High Resolution Audio, dts 96/24, dts-NEO:6 and dts-EX

(discrete and matrix) decoding

• RS-232 connector for flash memory software upgrades and configuration tool downloads

• Optical digital audio output connector for Zone 2 (TOSLINK)

• 3 12 volt output connections with 1/8” mini plug connectors

• 2 IR input connections

• XLR microphone input connections

• 7.1 Balanced audio output connectors for Main Zone

• HD Radio Tuner in addition to AM/FM

WELCOME

UNPACKING AND INSTALLATION

This section describes the unpacking and installation procedures for your new component.

Unpacking

All Cary Audio Design shipping cartons have been specially designed to protect their contents and

special care has been taken to prevent damage under normal shipping conditions. Mishandling

should be evident upon inspection of the shipping container. If shipping damage is found after

visual inspection, take care not to destroy the evidence. If necessary, document the damage with

photographs and contact the transport carrier immediately.

Carefully remove your new component from its packing carton and examine it closely for signs of

shipping damage. We strongly recommend saving all original packing cartons to protect your

component from damage should you wish to store it or ship it at a later date.

In the Box

When unpacking your Cinema 11a processor, make sure the following accessories are included.

You should find the following items:

• Power Cable

• 2 Remote Controls (batteries already installed)

• Owner’s Manual

• Warranty Card

Warranty Card

If you are the original purchaser of this unit and you purchased it in the United States, you

should fill out the enclosed warranty registration card and return it to Cary Audio Design within

15 days of your purchase. Cary Audio Design also suggests that you keep your original packing

cartons in case you ever need to ship the unit when moving to a new home. Warranty

restrictions apply. Consult the warranty section of this manual for details. Please be certain to

keep a copy of the original sales receipt from your Authorized Cary Audio Design dealer to

validate the warranty if ever needed.

FORMAT DESCRIPTIONS

dts-HD

DTS-HD Master Audio is capable of delivering audio that is a bit-for-bit identical to the studio

master. DTS-HD Master Audio delivers audio at super high variable bit rates –24.5 mega-bits per

second (Mbps) on Blu-ray discs and 18.0 Mbps on HD-DVD – that are significantly higher than

standard DVDs. This bit stream is so “fast” and the transfer rate is so “high” that it can deliver

the Holy Grail of audio: 7.1 audio channels at 96k sampling frequency/24 bit depths that are

identical to the original. With DTS-HD Master Audio, you will be able to experience movies and

music, exactly as the artist intended: clear, pure and uncompromised.

Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;

6,226,616; 6,487,535 & other U.S. and worldwide patents issued & pending.

DTS is a registered trademark and the DTS logos, symbol, DTS-HD and DTS-HD Master Audio are

WELCOME

dts-HD

DTS-HD High Resolution Audio can deliver up to 7.1 channels of sound that is virtually

indistinguishable from the original. DTS-HD High Resolution Audio delivers audio at high constant

bit rates superior to standard DVDs – 6.0 Mbps on Blu-ray discs and 3.0 Mbps on HD-DVD to

produce outstanding sound quality. It is capable of delivering up to 7.1 channels at 96k sampling

frequency/24 bit depth resolution. It allows content creators to deliver rich, high definition audio

on movies where disc space may not allow for DTS-HD Master Audio.

Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;

6,226,616; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS is a registered

trademark and the DTS logos, Symbol, DTS-HD, DTS-HD High Resolution Audio and DTS-HD

DTS was introduced in 1994 to provide 5.1 Channels of discrete digital audio into home theater

systems. DTS brings you premium quality discrete multi-channel digital sound to both movies and

music. DTS is a multi-channel sound system designed to create full range digital sound

reproduction. The no compromise DTS digital process sets the standard of quality for cinema

sound by delivering an exact copy of the studio master recordings to neighborhood and home

theaters. Now, every moviegoer can hear the sound exactly as the moviemaker intended.

DTS can be enjoyed in the home for either movies or music on DVD'S, LD'S, and CD'S.

DTS and DTS Digital Surround are registered trademarks of Digital Theater Systems, Inc.

The advantages of discrete multi-channel systems over matrix are well known. But even in

homes equipped for discrete multi-channel, there remains a need for high-quality matrix

decoding. This is because of the large library of matrix surround motion pictures available on

disc, VHS Hi Fi tape, and analog Stereo television broadcasts. The typical matrix decoder of today

derives a center channel and a mono surround channel from two-channel matrix stereo material.

It is better than a simple matrix in that it includes steering logic to improve separation, but

because of its mono, band-limited surround it can be disappointing to users accustomed to

discrete multi-channel sound.

Neo:6 offers several important improvements: Neo:6 provides up to six full-band channels of

matrix decoding from stereo matrix material. Users with 6.1 and 5.1 systems will derive six and

five separate channels, respectively, corresponding to the standard home-theater speaker

layouts. Neo:6 technology allows various sound elements within a channel or channels to be

steered separately, and in a way which follows naturally from the original presentation.

Neo:6 offers a music mode to expand stereo or matrix recordings into the five or six channel

layout, in a way which does not diminish the subtlety and integrity of the original stereo

recording.

WELCOME

DTS, DTS-ES Extended Surround, and Neo:6 are registered trademarks of Digital Theater

Systems, Inc.

DTS-ES Extended Surround is a new multi-channel digital signal format developed by Digital

Theater Systems Inc. While offering high compatibility with the conventional DTS Digital

Surround format, DTS-ES Extended Surround greatly improves the 360-degree surround

impression and space expression thanks to further expanded surround signals. This format has

been used professionally in movie theaters since 1999. In addition to the 5.1 surround channels

(FL, FR, C, SL, SR and LFE), DTS-ES Extended Surround also offers the SB (Surround Back)

channel for surround playback with a total of 6.1 channels. DTS-ES Extended Surround includes

two signal formats with different surround signal recording methods, as DTS-ES Discrete 6.1 and

DTS-ES Matrix 6.1.

DTS, DTS-ES Extended Surround, and Neo:6 are registered trademarks of Digital Theater

Systems, Inc.

The stereo CD is a 16-bit medium with sampling at 44.1kHz. Professional audio has been 20- or

24-bit for some time, and there is increasing interest in higher sampling rates both for recording

and for delivery into the home. Greater bit depths provide extended dynamic range. Higher

sampling rates allow wider frequency response and the use of anti-alias and reconstruction filters

with more favorable aural characteristics. DTS 96/24 allows for 5.1channel sound tracks to be

encoded at a rate of 96kHz/24bits on DVD-Video titles. When DVD-video appeared, it became

possible to deliver 24-bit, 96 kHz audio into the home, but only in two channels, and with serious

limitations on picture. This capability has had little use. DVD-audio allows 96/24 in six channels,

but a new player is needed, and only analog outputs are provided, necessitating the use of the

D/A converters and the analog electronics provided in the player.

DTS 96/24 offers the following:

1. Sound quality transparent to the original 96/24 master.

2. Full backward compatibility with all existing decoders. (Existing decoders will output a 48

kHz signal)

3. No new player required: DTS 96/24 can be carried on DVD-video, or in the video zone of

DVD-audio, accessible to all DVD players.

4. 96/24 5.1 channel sound with full-quality full-motion video, for music programs and

motion picture soundtracks on DVD-video.

Dolby® TrueHD is Dolby’s next-generation lossless technology developed for high-definition disc-

based media. Dolby TrueHD delivers tantalizing sound that is bit-for-bit identical to the studio

WELCOME

master, unlocking the true high-definition entertainment experience on next-generation discs.

When coupled with high-definition video, Dolby TrueHD offers an unprecedented home theater

experience that lets you enjoy sound as stunning as the high-definition picture.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are

trademarks of Dolby Laboratories.

Dolby Digital Plus is a highly sophisticated and versatile audio coding based on Dolby Digital and

designed specifically to adapt to the changing demands of future audio, video delivery, and audio

storage systems while simultaneously retaining backwards compatibility with the existing Dolby

Digital 5.1-channel home theater systems in use today.

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, Surround EX, and the

double-D symbol are trademarks of Dolby Laboratories.

The Dolby Headphone technology provides a surround sound listening experience over

headphones.

When listening to multi-channel content such as DVD movies over headphones, the listening

experience is fundamentally different than listening to speakers. Since the headphone speaker

drivers are covering the pinna of the ear, the listening experience differs greatly from traditional

speaker playback. Dolby utilizes patented headphone perspective curves to solve this problem

and provides a non-fatiguing, immersive, home theater listening experience. Dolby Headphone

also delivers exceptional 3D audio from stereo material.

Manufactured under license from Dolby Laboratories. The double-D symbol is a trademark of

Dolby Laboratories.

Dolby Digital identifies the use of Dolby Digital audio coding for such consumer formats as DVD

and DTV. As with film sound, Dolby Digital can provide up to five full-range channels for left,

center, and right screen channels, independent left and right surround channels, and a sixth

(".1") channel for low-frequency effects.

Dolby Surround Pro Logic II is an improved matrix decoding technology that provides better

spatiality and directionality on Dolby Surround program material. It provides a convincing three-

dimensional sound field on conventional stereo music recordings. While conventional surround

programming is fully compatible with Dolby Surround Pro Logic II decoders, soundtracks will be

able to be encoded specifically to take full advantage of Pro Logic II playback, including separate

left and right surround channels. (Such material is also compatible with conventional Pro Logic

decoders.)

WELCOME

Dolby Digital EX creates six full-bandwidth output channels from 5.1-channel sources. This is

done using a matrix decoder that derives three surround channels from the two in the original

recording. For best results, Dolby Digital EX should be used with movies soundtracks recorded

with Dolby Digital Surround EX.

About Dolby Pro Logic IIx

Dolby Pro Logic IIx is fully compatible with Dolby Surround Pro Logic technology and can

optimally decode the thousands of commercially available Dolby Surround encoded video

cassettes and television programs with enhanced depth and spatiality. It can also process any

high-quality stereo or Advanced Resolution 5.1 channel music content into a seamless 6.1 or 7.1

channel listening experience.

Dolby Pro Logic IIx technology delivers a natural and immersing 7.1-channel listening experience

to the home theater environment. A product of Dolby's expertise in surround sound and matrix

decoding technologies, Dolby Pro Logic IIx is a complete surround sound solution that maximizes

the entertainment experience from stereo as well as 5.1 channel encoded sources.

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol

are trademarks of Dolby Laboratories.

*All trademarks belong to their original owners.

SPECIFICATIONS

The Cinema 11a is designed for long-term stability in virtually any home operating situation.

However, if the unit is operated outside the parameters outlined in this owner's manual, damage

may result. Please read this manual carefully before putting your new Cinema 11a processor into

operation.

The following section describes the Cinema 11a’s basic specifications. The specifications are

subject to change without notice or obligation.

AUDIO INPUTS / AUDIO OUTPUTS

...........................................................................................................................................................................

Audio Inputs 7 - Stereo Pairs with RCA connectors

1 - XLR pair

1 - 7.1 channel analog input with RCA connectors

...........................................................................................................................................................................

Digital Audio Inputs 7 - Coaxial (RCA) for the seven single ended inputs

7 - TOSLINK for the seven single ended inputs

1 - XLR for the balanced input

...........................................................................................................................................................................

HDMI Inputs 2 – HDMI V1.3 inputs

...........................................................................................................................................................................

Sample Rates 44.1, 48, 88.2, 96 or 192kHz

...........................................................................................................................................................................

Accepts 16-24 bits PCM audio, Dolby TrueHD, Dolby Plus, Dolby Digital

Ex, dts-HD Master Audio, dts-HD High Resolution Audio, dts and

dts-ES discrete data formats

...........................................................................................................................................................................

Main Audio Outputs 7.1 RCA, L/R, Center, LFE (Subwoofer), Side L/R, Rear L/R 7.1

XLR, L/R, Center, LFE (Subwoofer), Side L/R, Rear L/R

...........................................................................................................................................................................

HDMI Output 1 – HDMI V1.3 output

...........................................................................................................................................................................

Zone 2 Audio Outputs 1 - RCA stereo pair

1 - TOSLINK digital

...........................................................................................................................................................................

ANALOG AUDIO SECTION

...........................................................................................................................................................................

Input Impedance 100 k Ohms

...........................................................................................................................................................................

Output Impedance Main - RCA 330

Main - XLR 660

Zones 2 - 220

...........................................................................................................................................................................

Rated Input 2.0 Vrms

...........................................................................................................................................................................

Maximum Input 6.0 Vrms

...........................................................................................................................................................................

Rated Output (100 k load) 2.0 Vrms

...........................................................................................................................................................................

Minimum Load 5k

...........................................................................................................................................................................

Maximum Output RCA - 8.0 Vrms

XLR - 16.0 Vrms

SPECIFICATIONS

...........................................................................................................................................................................

Headphone Output 100mW into 32 Ohms at 0.2% THD+N

...........................................................................................................................................................................

Volume Control Range Main - -90.0 dB to +15.5 dB (1.0 dB increments)

Zone 2/Headphone - -90.0 dB to +15.5 dB (1.0 dB increments)

...........................................................................................................................................................................

Channel Separation 89 dB (1 kHz)

...........................................................................................................................................................................

Total Crosstalk b/t Inputs 89 dB (1 kHz)

...........................................................................................................................................................................

XLR Pin Configuration Pin 1: Ground

Pin 2: Positive

Pin 3: Negative

...........................................................................................................................................................................

DIGITAL AUDIO

All digital audio inputs are to S/PDIF electrical (75 Ohms, 0.5 V p-p), S/P DIF optical (Toslink), or

AES/EBU (110 Ohms, 0.5 V p-p) standards, 44.1kHz to 192kHz regardless of input.

...........................................................................................................................................................................

Analog to Digital Converters Burr-Brown PCM 1802

...........................................................................................................................................................................

Input Receiver Cirrus CS 8416

...........................................................................................................................................................................

Processor Dual 32 Bit Audio DSP at 516 MIPS

...........................................................................................................................................................................

Digital to Analog Converters Burr-Brown DSD 1796

...........................................................................................................................................................................

MAIN PATH

RCA and XLR Output, 48 kHz Sampling Rate for all Digital Signal Paths

...........................................................................................................................................................................

Frequency Response and Bandwidth

Analog - Direct Inputs 10 Hz to 20 kHz, 1 Hz to 120 kHz (-3 dB)

Analog - DSP Inputs at 24/96 10 Hz to 20 kHz, 2 Hz to 44 kHz (-3 dB)

Digital Inputs at 24/96 10 Hz to 20 kHz, 1 Hz to 44 kHz (-3 dB)

...........................................................................................................................................................................

THD+N (at Rated Input and Output)

Analog - Direct Inputs 0.005% (90 kHz BW)

Analog - DSP Inputs at 24/96 0.003% (AES17 filter)

Digital Inputs at 24/96 0.003% (AES17 filter)

...........................................................................................................................................................................

IMD (CCIF at 15 kHz)

Analog - Direct Inputs 0.001%

Analog - DSP Inputs at 24/48 0.001%

Digital Inputs at 24/48 0.001%

...........................................................................................................................................................................

SPECIFICATIONS

S/N Ratio (ref 2.0 Vrms)

Analog - Direct Inputs 108 dB

Analog - DSP Inputs at 24/96 105 dB

Digital Inputs at 24/96 107 dB

...........................................................................................................................................................................

IMD (CCIF at 15 kHz)

Analog - Direct Inputs 0.001%

Analog - DSP Inputs at 24/48 0.001%

Digital Inputs at 24/48 0.001%

...........................................................................................................................................................................

HDAM / AM Tuner

Frequency Range In 10kHz steps: 530kHz to 1,700kHz

Sensitivity (All Digital) -111dBm

S/N Ratio 50 dB typical, 43dB min

Distortion 0.7% typical, 2.0% max

One-Signal Selectivity (10kHz) 24 dB typical, 18dB min

...........................................................................................................................................................................

HDFM / FM Tuner

Frequency Range 87.9MHz to 107.9MHz

Sensitivity Hybrid mode -94dBm

All Digital -112dBm

Signal-to-Noise Ratio Mono 80dB (at 65 dBf)

Stereo 76dB (at 85 dBf)

Distortion Mono 0.08% (100 Hz)

0.08% (1 kHz)

0.2% (6 kHz)

Stereo 0.2% (100 Hz)

0.15% (1 kHz)

0.3% (6 kHz)

Capture Ratio 1.0 dB

Alternate Channel Selectivity 65 dB (400 kHz)

Stereo Separation 50 dB (1 kHz)

35 dB (30 Hz to 15 kHz)

Frequency Response 30 Hz to 15 kHz

Image Interference Ratio 50 dB

IF Interference Ratio 80 dB

AM Suppression Ratio 55 dB

Spurious Interference Ratio 70 dB

Antenna Input 75 Ohms unbalanced

...........................................................................................................................................................................

ZONE 2 PATHS

...........................................................................................................................................................................

Frequency Response/Bandwidth 20 Hz to 20 kHz, 3 Hz to 140 kHz (+0, -3 dB)

...........................................................................................................................................................................

THD+N (at Rated Input and Output) 0.06% (90 kHz BW)

...........................................................................................................................................................................

IMD (CCIF at 15 kHz) 0.06%

...........................................................................................................................................................................

S/N Ratio (ref 2.0 Vrms) 97 dB

...........................................................................................................................................................................

SPECIFICATIONS

CONTROL

...........................................................................................................................................................................

RS-232 Interface

Connection DB-9F, straight-wired

Pinout (Statement DI side) Pin 2: Tx, Pin 3: Rx, Pin 5: Ground

Baud Rate 57600

Configuration 8 data bits, 1 stop bit, no parity bits,

flow control (RTS, CTS, NONE)

...........................................................................................................................................................................

Trigger Outputs

Polarity 3.5 mm mono (tip positive), sleeve negative

Maximum Current at 12 VDC 150 mA (Triggers 1,2), 200 mA (Trigger 3)

Sequential Delay 100 ms

...........................................................................................................................................................................

POWER REQUIREMENTS

...........................................................................................................................................................................

Power Requirements 117VAC or 234VAC 50-60Hz

...........................................................................................................................................................................

Power Consumption Maximum 50 W

...........................................................................................................................................................................

CONTROLS AND DISPLAYS

FRONT PANEL

121

8910

1415

POWER

SUR.

MODE

CES 7.1

Cine m a 11a

192kHz/24 bit D/A Converter

Surround Sound Processor

AM/FM

PRO

LOGIC IIx

MASTER VOLUME

TUNER

HD RADIO PRESET NEO:6

MODE

INPUT

123 4

SETUP

ENTER

HDMI 1 HDMI 2 7.1 IN

1. POWER

• Press once to turn the power ON.

• Press again to turn the power OFF. The Cinema 11a will enter STANDBY and the blue

POWER LED will light.

2. BAND (AM)/(FM)

• Press this button to select between the AM & FM frequency bands.

3. BAND HDAM/HDFM (HD RADIO)

• Press this button to select between the HDAM & HDFM frequency bands.

4. PRESET

• Press this button to preset and recall desired broadcasting stations.

5. PRESET

• Press this button to preset and recall desired broadcasting stations.

6. INPUT SELECTOR

• Press one of these buttons to select the Audio input source.

7. PRO LOGIC IIx

• Press this button to select either the Pro Logic II decoding or Pro Logic IIx decoding

8. SUR. MODE

• Press this button to select the surround sound mode as a part of Dolby Digital or DTS

decoding; music or movie selections.

9. NEO:6

• Press this button to turn the NEO:6 mode ON or OFF.

10. CES 7.1

• Press this button to select DOLBY EX AUTO, DOLBY EX ON, or DOLBY EX OFF mode.

CONTROLS AND DISPLAYS

121

8910

1415

POWER

SUR.

MODE

CES 7.1

Cine m a 11a

192kHz/24 bit D/A Converter

Surround Sound Processor

AM/FM

PRO

LOGIC IIx

MASTER VOLUME

TUNER

HD RADIO PRESET NEO:6

MODE

INPUT

123 4

SETUP

ENTER

HDMI 1 HDMI 2 7.1 IN

11. MASTER VOLUME KNOB

• Use this knob to adjust the overall sound level.

12. INFRARED RECEIVING SENSOR WINDOW

• This window receives infrared signals from the remote control.

13. ALPHANUMERIC DISPLAY

• This twenty-character display provides a wide range of information concerning the

operation of the Cinema 11a.

14. NAVIGATION / ENTER

• Use the four navigation buttons to move through menu options shown on the Cinema 11a

display. Use the ENTER button to confirm the selections made in the menus.

15. HEADPHONE JACK

• Use for Dolby Headphone playback of movies or personal listening to the AM/FM radio

section.

CONTROLS AND DISPLAYS

REAR PANEL

LEFT

RIGHT

ANALOG AUDIO INPUT

ANALOG 7.1 INPUT

7.1 PREAMPLIFIER OUTPUT

RS 232

IR INPUT ZONE

TRIGGERS

123

ZONE 2

AUDIO

OUT

SL CEN

SBL

SBR

CEN SBL

SBL

SBR

A C PO WER

[ ] 117V 50/60 Hz

[ ] 220V 50/60 Hz

Cinema 11a Surround Sound Processor

CARY AUDIO DESIGN

12345

324

678

56 78

DIGI TAL I NP UT

AUTO

SETUP

MIC- IN

AM LOOP

ANTENNA

ZONE 2

DIGITAL

OUT

SL CEN

HDMI 1 INPUT

HDMI 2 INPUT

HDMI OUTPUT

151617

1. ANALOG AUDIO IN (INPUT 1) XLR (L + R)

• Use these jacks for connection to balanced CD or DVD player analog output connections.

2. ANALOG AUDIO IN (INPUTS 2 THROUGH 8) RCA

• Use these jacks for connection to CD, DVD, TV, or VCR input options.

3. ANALOG AUDIO 7.1 INPUT

• By connecting a DVD audio player, SACD multi channel player, or other component that

has a multi-channel output, you can playback the analog audio with 5.1 channel or 7.1

channel outputs.

4. 2

ZONE ANALOG AUDIO OUT

• These jacks supply the analog stereo audio outputs to an external audio amplifier used to

power the speakers in the remote zone.

5. 7.1 PREAMPLIFIER OUTPUTS

• Use these jacks to connect to the main five- or seven-channel power amplifiers.

6. 7.1 PREAMPLIFIER OUTPUTS XLR

• Use these jacks to connect to the main five or seven channel power amplifiers.

7. AC INLET CONNECTOR

• Plug the power cord into this AC inlet and then into the power outlet on the wall.

8. DC TRIGGER OUTPUT TERMINALS

• Connect devices that need to be triggered by DC + 12V. (Screen, curtains, lights, etc.)

9. IR INPUT

• Use the 1 and zone 2 Ext remote jacks to connect external IR sensors. When the unit is

installed where it is not otherwise visible to the remote, connect an optional, external

sensor and the 1 (Main) jack will be activated. The Cinema 11a should be used for

connections to the power amplifiers for the main room speaker. The device connected to

the zone trigger will only be activated when the Multi-Zone system is turned on. Connect

it to the amplifier used to power the speakers in the second zone (Zone 2).

Page is loading ...

Cary Audio Design Cinema 11a User manual

Brand: Cary Audio Design

Model: Cinema 11a

Category: AV receivers

Type: User manual

This manual is also suitable for

Download PDF

report

Cary Audio Design Cinema 11a User manual

This manual is also suitable for

Cary Audio Design Cinema 11a User manual

Related papers

Other documents