Cary Audio Design 11a User manual

Category
AV receivers
Type
User manual

This manual is also suitable for

OWNER’S MANUAL
ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
NOTE: Before installing your new component, please read this manual carefully
as it will inform you of the product speci cations, proper installation and correct
operating procedures for your unit. Also included in this manual are guidelines
on how to service and care for your new Cary Audio Design product.
Cinema 11a
HD Surround Sound Processor
TABLE OF CONTENTS
1
Important Safety Instructions .......................................................... 3
Welcome
Thank You ............................................................................................ 6
Product Features ................................................................................... 7
Unpacking and Installation ..................................................................... 8
Format Descriptions ............................................................................... 8
Specifications
Audio Inputs / Audio Outputs ............................................................... 13
Analog Audio Section ........................................................................... 13
Digital Audio .........................................................................................14
Main Path .............................................................................................14
Zone 2 Paths......................................................................................... 15
Control .................................................................................................16
Power Requirements..............................................................................16
Controls & Displays
Front Panel ......................................................................................... 17
Rear Panel........................................................................................... 19
Remote Control.................................................................................... 21
Zone 2 Remote Control......................................................................... 23
Installation
Location .............................................................................................. 24
Getting Started..................................................................................... 24
Connecting a Multi Channel Power Amplifier .......................................... 25
Second Zone (Zone 2) ......................................................................... 26
Power Control Connections ................................................................... 26
Remote Control ................................................................................... 26
Power Connection ................................................................................. 26
Auto Sound Setup
How to Perform Auto Sound Setup..........................................................27
Speaker Check .................................................................................... 28
Set Distance ........................................................................................ 29
Set Balance ......................................................................................... 29
Set Room EQ ...................................................................................... 29
Set Crossover Points ............................................................................ 30
Set Speaker Phase ............................................................................... 30
Manual Sound Setup
Set Speaker Configuration...................................................................... 31
Set Distance..................................................................................................32
Set Balance...................................................................................................33
Set Channel Levels Using the Test Tone Function ....................................34
Set Crossover Points......................................................................................34
Set Acoustic Calibration Room EQ .......................................................... 35
Setup Menu
Set Speaker Phase................................................................................. 37
Input.................................................................................................... 37
Assigned Inputs.....................................................................................38
Change Input Names............................................................................. 38
Set Analog IN Level Settings .................................................................. 39
Set Analog IN Configuration...................................................................40
Set HDMI IN Audio..........................................................................41
Listening to the Radio......................................................................42
Connection Chart ............................................................................43
Zone 2 ...........................................................................................44
TABLE OF CONTENTS
2
Set Zone 2 Input.............................................................................44
Set Zone 2 Volume..........................................................................44
Advanced Settings ................................................................................45
Set Password ........................................................................................45
HDMI Audio Out.................................................................................... 46
AV Sync Delay....................................................................................... 46
Bright................................................................................................... 46
Edit Custom Name................................................................................. 46
Set Infrared Remote (IR) Controls ..........................................................47
Set Triggers ..........................................................................................48
Set Auto Input Seek ..............................................................................48
Set Late Mode for Dolby Digital ..............................................................48
Set Restore Default................................................................................ 49
Service and Care
Care and Cleaning ............................................................................... 50
Factory Service .................................................................................... 50
Non-Warranty Repairs .......................................................................... 50
United States Limited Warranty ........................................................... 51
IMPORTANT SAFETY INSTRUCTIONS
3
WARNING: To reduce the risk of fire or electric shock, do
not expose this appliance to rain or moisture. The lightning
flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of un-insulated
dangerous voltage within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of electric
shock to persons.
CAUTION: To reduce the risk of electric shock, do not remove the cover. There are no user serviceable parts inside.
Please refer to qualified personnel for service.
ALERT: The exclamation point within an equilateral triangle is intended to alert the user of the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the component.
1. READ ALL INSTRUCTIONS: All the safety and operating instructions of your Cary Audio equipment should be read
before power is applied to the equipment.
2. RETAIN OWNER'S MANUAL: These safety and operating instructions should be retained for future reference.
3. HEED WARNING: All warnings on the unit and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS: All operating and use instructions should be followed.
5. CLEANING: Unplug the unit from the wall outlet before cleaning. The unit should be cleaned only as recommended
by the manufacturer.
6. ATTACHMENTS: Do not use attachments not recommended by the unit manufacturer as they may cause hazards.
7. WATER AND MOISTURE: Do not use the unit near water - for example, near a bath tub, wash bowl, kitchen sink,
or laundry tub; in a wet basement; or near a swimming pool.
8. ACCESSORIES: Do not place the unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall,
causing serious injury to a child, an adult, or damage to the unit. Mounting of the unit should follow the
manufacturer's instructions and should use a mounting accessory recommended by the manufacturer.
9. VENTILATION: Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the
unit and to protect it from overheating. These openings must not be blocked or covered. The top or bottom panel
openings should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. The unit should
not be installed in a built-in location such as a bookcase or rack unless proper ventilation is provided. There should
be free space of at least 6 inches (16cm) above the unit and an opening behind the unit.
10. GROUNDING OR POLARIZATION: The unit may be equipped with a polarized alternating current line plug (a
plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety
feature. If you cannot insert the plug fully into the outlet, try reversing the plug. If the plug should fail to fit, contact
a licensed electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
11. POWER SOURCES: The unit should be operated only from the type of power source indicated on the marking
label. If you are not sure of the type of power supplied to your home, consult your unit dealer or local power
company.
12. POWER CORD PROTECTION: Power supply cords should be routed so that they are unlikely to be walked on or
pinched by items placed on or against them. Pay close attention to cords where they enter a plug, or a convenience
receptacle, and the point where they exit from the unit.
13.
OUTDOOR ANTENNA GROUNDING: If an outside antenna or cable system is connected to the unit, be sure the
antenna or cable system is grounded so as to provide protection against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, NSI/NFPA 70, provides information regarding proper grounding of the
mast and supporting structure, grounding of the lead-in wire to an Antenna-discharge unit, size of grounding
conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the
grounding electrode.
IMPORTANT SAFETY INSTRUCTIONS
4
ative.
14. LIGHTNING: For added protection for the unit during a lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent
damage to the unit due to lightning and power line surges.
15. POWER LINES: An outside antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside
antenna system, take extreme care to keep from touching such power lines or circuits as contact with them might be
fatal.
16. OVERLOADING: Do not overload wall outlets, extension cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.
17. OBJECT AND LIQUID ENTRY: Never push objects of any kind into the unit through openings as they may touch
dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind
on the unit.
18. SERVICING: Do not attempt to service the unit yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
19. REPLACEMENT PARTS: When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other hazards.
20. SAFETY CHECK: Upon completion of any service or repairs to the unit, ask the service technician to perform safety
checks to determine that the unit is in proper operating condition.
21. WALL OR CEILING MOUNTING: The unit should be mounted to a wall or ceiling only as recommended by the
manufacturer.
22. HEAT: The unit should be situated away from heat sources such as radiators, heat registers, stoves, or other units
(including amplifiers) that produce heat.
23. IMPORTANT SAFETY NOTE: Before connecting a new component to your audio or home theater system it is
always good practice to make certain that all components are turned off, and preferably unplugged from their AC
power source. Many modern electronics products feature automatic turn-on circuits that may be activated during an
installation, causing the potential for damage to electronic components and/or speakers. Such damage is not
covered by product warranties and Cary Audio specifically disclaims responsibility for any such damage.
Power Cord: The removable power cord that is shipped with the player is specifically designed to be used with this
product. Other AC cords may be used, so consult your dealer for advice on AC power cords and high quality wire in
your system.
AC Fuse: The fuse is located inside the chassis and is not user serviceable. If power does not
come on, contact your authorized service represent
Wiring: Cables that run inside of walls should have the appropriate markings to indicate
compliance with, and listing by the UL, CSA or other standards required by the UL, CSA, NEC or your local building
code. Questions about cables inside of walls should be referred to a qualified custom installer, or a licensed
electrician or low-voltage contractor.
Do Not Open the Cabinet: There are no user serviceable components inside this product. Opening the cabinet
may present a shock hazard, and any modification to the product will void your warranty. If water or any metal
object, such as a paper clip, coin, or staple accidentally falls inside the unit, disconnect it from the AC power source
immediately and contact Cary Audio for further instructions.
24. RECORDING COPYRIGHT: Recording of copyrighted material for other than personal use is illegal without
permission of the copyright holder.
25. NOTE TO CATV SYSTEM INSTALLER: This reminder is provided to call the CATV system installer's attention to
article 820-40 of the NEC, ANSI/NFPA 70, which provides guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry
as practical.
IMPORTANT SAFETY INSTRUCTIONS
5
o
t
ing electrode.
26. FCC INFORMATION FOR USER:
CAUTION: ANY changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to
Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from where the receiver is connected.
27. OUTDOOR ANTENNA INSTALLATION/SAFE ANTENNA AND CABLE
CONNECTION: If an outside antenna or cable system is connected to
the equipment, be sure the antenna or cable system is grounded so as t
provide protection against built up static charges and voltage surges,
Section 810 of the national Electrical Code, ANSI/NFP A70 (in Canada,
part 1 of the Canadian Electrical Code) provides information with respec
to proper grounding of the mast and supporting structure, grounding of
the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit, connection to grounding
electrodes and requirements for the ground
Keep Antenna Clear of High Voltage Power Lines or Circuits
An outside antenna system should be located well away from power lines, electric light or power circuits and where
it will never come into contact with these power sources if it should happen to fall. When installing an outside
antenna, extreme care should be taken to avoid touching power lines, circuits or other power sources as this could
be fatal. Because of the hazards involved, antenna installation should be left to a professional.
WELCOME
6
THANK YOU
Congratulations on becoming a Cinema 11a owner!
We, at Cary Audio Design, would like to thank you for purchasing the new Cinema 11a HD
Surround Sound Processor. The Cinema 11a is the latest generation of our award-winning
surround sound processors.
The Cinema 11a is the ultimate in surround sound processors. Utilizing the Cirrus Logic CS49700
series chipset and HDMI v1.3, the Cinema 11a has the ability to properly decode and playback
both the raw bit stream and lossless linear PCM signals from the latest high resolution formats,
including Dolby True HD, Dolby Digital Plus, DTS-HD Master Audio, and DTS-HD High Resolution
Audio. The Cinema 11a has the ability to set separate Listener Profile speaker settings for
playback of Music and Movies. The Cinema 11a uses the best available components in the audio
circuit, resulting in extraordinary sound quality, which is a trademark of Cary Audio Design
products. The Cinema 11a contains an HD radio tuner for the highest resolution signals from FM
broadcasts.
The Cinema 11a was designed for ease of use whether in normal home surround sound systems
or in more complex custom installations. It has an independent 2
nd
zone so you can experience
surround sound in your main home theater room as well as 2
nd
zone stereo sound in a different
location. A 2
nd
zone separate remote handset comes standard with the Cinema 11a so control of
the input source selection in each of the two zones is at your fingertips.
All Main zone audio output connectors have 24 bit/192 kHz D/A converters operating in dual
differential mode for excellent sound quality and high dynamic range. In addition, the Cinema
11a includes 7.1 channel XLR balanced audio outputs for the Main zone if you are using a power
amplifier equipped with balanced input connections.
The Cinema 11a was designed to remain viable in a future of rapidly emerging and changing
digital technologies. It has a rear panel RS-232 serial port connector that provides for home
automation serial control, and it allows us to provide flash memory upgrades.
We firmly believe in high performance products that offer incredible value for the money. With its
leading edge technology, exceptional sound performance, and ease of use, the Cinema 11a is
without question, the highest performing surround sound processor available today.
Thank you for your continued support and enjoy your Music and Movies!
The Cary Audio Design Team
WELCOME
7
PRODUCT FEATURES
The Cinema 11a is designed as an “audio only” surround sound processor. With the addition of
the new Cirrus Logic CS49700 series chipset and HDMI v1.3, the new Cinema 11a has the ability
to properly decode and playback both the raw bit stream and lossless linear PCM signals from all
of the high resolution audio formats available today such as Dolby True HD, Dolby Digital Plus,
DTS HD High Resolution Audio, and DTS HD Master Audio.
In addition to the ability to properly decode and playback the high resolution formats, the Cinema
11a is also equipped with Dolby Digital Surround EX, Dolby Pro Logic II, Dolby Pro Logic IIx, dts
96/24, dts NEO:6, and dts-ES decoding.
With dual 32-bit audio digital signal processing (DSP) engines, the Cinema 11a offers
unparalleled processing power. These DSP engines perform custom Cary Audio processing such
as an auto sound setup system, CES 7.1 decoding, bass enhancement, dialog enhancement, bass
management, high-precision digital crossover, and room EQ. This processing is available at
sample rates up to 192 kHz, with 24-bit resolution to retain top performance from all input
sources and listening modes. A DSP engine is dedicated to decoding multi-channel compressed
audio sources.
10 channels 24-bit/96 kHz A/D converters can be used to convert stereo analog audio input and
7.1 analog audio input signals to digital signals, allowing the Cinema 11a to provide the benefits
of precise digital signal processing without sacrificing signal integrity. Alternatively, stereo analog
XLR or 7.1 bypass signals and 7.1 analog signals can bypass A/D conversion and internal
processing to remain in the analog domain straight to the output connectors.
The Cinema 11a offers:
2 HDMI v1.3 inputs and 1 HDMI v1.3 output
8 inputs; one balanced and seven single ended with RCA connectors; including S/PDIF
coaxial, S/PDIF optical, and analog pairs
7.1 channel analog audio input connections
Analog bypass option for stereo and 7.1 channel analog audio input connectors
Auto switching between digital and analog audio input connectors
24-bit/192 kHz D/A converters for all Main Zone audio channels
Automatic and manual calibration of speaker distances and output levels
Dual 32-bit DSP engines
CES 7.1 decoding
Dolby True HD, Dolby Digital Plus, Dolby Digital Surround EX, Dolby Pro Logic IIx and
Dolby Pro Logic II decoding
DTS HD Master Audio, DTS HD High Resolution Audio, dts 96/24, dts-NEO:6 and dts-EX
(discrete and matrix) decoding
RS-232 connector for flash memory software upgrades and configuration tool downloads
Optical digital audio output connector for Zone 2 (TOSLINK)
3 12 volt output connections with 1/8” mini plug connectors
2 IR input connections
XLR microphone input connections
7.1 Balanced audio output connectors for Main Zone
HD Radio Tuner in addition to AM/FM
WELCOME
8
UNPACKING AND INSTALLATION
This section describes the unpacking and installation procedures for your new component.
Unpacking
All Cary Audio Design shipping cartons have been specially designed to protect their contents and
special care has been taken to prevent damage under normal shipping conditions. Mishandling
should be evident upon inspection of the shipping container. If shipping damage is found after
visual inspection, take care not to destroy the evidence. If necessary, document the damage with
photographs and contact the transport carrier immediately.
Carefully remove your new component from its packing carton and examine it closely for signs of
shipping damage. We strongly recommend saving all original packing cartons to protect your
component from damage should you wish to store it or ship it at a later date.
In the Box
When unpacking your Cinema 11a processor, make sure the following accessories are included.
You should find the following items:
Power Cable
2 Remote Controls (batteries already installed)
Owner’s Manual
Warranty Card
Warranty Card
If you are the original purchaser of this unit and you purchased it in the United States, you
should fill out the enclosed warranty registration card and return it to Cary Audio Design within
15 days of your purchase. Cary Audio Design also suggests that you keep your original packing
cartons in case you ever need to ship the unit when moving to a new home. Warranty
restrictions apply. Consult the warranty section of this manual for details. Please be certain to
keep a copy of the original sales receipt from your Authorized Cary Audio Design dealer to
validate the warranty if ever needed.
FORMAT DESCRIPTIONS
dts-HD
DTS-HD Master Audio is capable of delivering audio that is a bit-for-bit identical to the studio
master. DTS-HD Master Audio delivers audio at super high variable bit rates –24.5 mega-bits per
second (Mbps) on Blu-ray discs and 18.0 Mbps on HD-DVD – that are significantly higher than
standard DVDs. This bit stream is so “fast” and the transfer rate is so “high” that it can deliver
the Holy Grail of audio: 7.1 audio channels at 96k sampling frequency/24 bit depths that are
identical to the original. With DTS-HD Master Audio, you will be able to experience movies and
music, exactly as the artist intended: clear, pure and uncompromised.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,226,616; 6,487,535 & other U.S. and worldwide patents issued & pending.
DTS is a registered trademark and the DTS logos, symbol, DTS-HD and DTS-HD Master Audio are
trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights Reserved.
WELCOME
9
dts-HD
DTS-HD High Resolution Audio can deliver up to 7.1 channels of sound that is virtually
indistinguishable from the original. DTS-HD High Resolution Audio delivers audio at high constant
bit rates superior to standard DVDs – 6.0 Mbps on Blu-ray discs and 3.0 Mbps on HD-DVD to
produce outstanding sound quality. It is capable of delivering up to 7.1 channels at 96k sampling
frequency/24 bit depth resolution. It allows content creators to deliver rich, high definition audio
on movies where disc space may not allow for DTS-HD Master Audio.
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,226,616; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS is a registered
trademark and the DTS logos, Symbol, DTS-HD, DTS-HD High Resolution Audio and DTS-HD
High Res Audio are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights Reserved.
DTS was introduced in 1994 to provide 5.1 Channels of discrete digital audio into home theater
systems. DTS brings you premium quality discrete multi-channel digital sound to both movies and
music. DTS is a multi-channel sound system designed to create full range digital sound
reproduction. The no compromise DTS digital process sets the standard of quality for cinema
sound by delivering an exact copy of the studio master recordings to neighborhood and home
theaters. Now, every moviegoer can hear the sound exactly as the moviemaker intended.
DTS can be enjoyed in the home for either movies or music on DVD'S, LD'S, and CD'S.
DTS and DTS Digital Surround are registered trademarks of Digital Theater Systems, Inc.
The advantages of discrete multi-channel systems over matrix are well known. But even in
homes equipped for discrete multi-channel, there remains a need for high-quality matrix
decoding. This is because of the large library of matrix surround motion pictures available on
disc, VHS Hi Fi tape, and analog Stereo television broadcasts. The typical matrix decoder of today
derives a center channel and a mono surround channel from two-channel matrix stereo material.
It is better than a simple matrix in that it includes steering logic to improve separation, but
because of its mono, band-limited surround it can be disappointing to users accustomed to
discrete multi-channel sound.
Neo:6 offers several important improvements: Neo:6 provides up to six full-band channels of
matrix decoding from stereo matrix material. Users with 6.1 and 5.1 systems will derive six and
five separate channels, respectively, corresponding to the standard home-theater speaker
layouts. Neo:6 technology allows various sound elements within a channel or channels to be
steered separately, and in a way which follows naturally from the original presentation.
Neo:6 offers a music mode to expand stereo or matrix recordings into the five or six channel
layout, in a way which does not diminish the subtlety and integrity of the original stereo
recording.
WELCOME
10
DTS, DTS-ES Extended Surround, and Neo:6 are registered trademarks of Digital Theater
Systems, Inc.
DTS-ES Extended Surround is a new multi-channel digital signal format developed by Digital
Theater Systems Inc. While offering high compatibility with the conventional DTS Digital
Surround format, DTS-ES Extended Surround greatly improves the 360-degree surround
impression and space expression thanks to further expanded surround signals. This format has
been used professionally in movie theaters since 1999. In addition to the 5.1 surround channels
(FL, FR, C, SL, SR and LFE), DTS-ES Extended Surround also offers the SB (Surround Back)
channel for surround playback with a total of 6.1 channels. DTS-ES Extended Surround includes
two signal formats with different surround signal recording methods, as DTS-ES Discrete 6.1 and
DTS-ES Matrix 6.1.
DTS, DTS-ES Extended Surround, and Neo:6 are registered trademarks of Digital Theater
Systems, Inc.
The stereo CD is a 16-bit medium with sampling at 44.1kHz. Professional audio has been 20- or
24-bit for some time, and there is increasing interest in higher sampling rates both for recording
and for delivery into the home. Greater bit depths provide extended dynamic range. Higher
sampling rates allow wider frequency response and the use of anti-alias and reconstruction filters
with more favorable aural characteristics. DTS 96/24 allows for 5.1channel sound tracks to be
encoded at a rate of 96kHz/24bits on DVD-Video titles. When DVD-video appeared, it became
possible to deliver 24-bit, 96 kHz audio into the home, but only in two channels, and with serious
limitations on picture. This capability has had little use. DVD-audio allows 96/24 in six channels,
but a new player is needed, and only analog outputs are provided, necessitating the use of the
D/A converters and the analog electronics provided in the player.
DTS 96/24 offers the following:
1. Sound quality transparent to the original 96/24 master.
2. Full backward compatibility with all existing decoders. (Existing decoders will output a 48
kHz signal)
3. No new player required: DTS 96/24 can be carried on DVD-video, or in the video zone of
DVD-audio, accessible to all DVD players.
4. 96/24 5.1 channel sound with full-quality full-motion video, for music programs and
motion picture soundtracks on DVD-video.
Dolby® TrueHD is Dolby’s next-generation lossless technology developed for high-definition disc-
based media. Dolby TrueHD delivers tantalizing sound that is bit-for-bit identical to the studio
WELCOME
11
master, unlocking the true high-definition entertainment experience on next-generation discs.
When coupled with high-definition video, Dolby TrueHD offers an unprecedented home theater
experience that lets you enjoy sound as stunning as the high-definition picture.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Dolby Digital Plus is a highly sophisticated and versatile audio coding based on Dolby Digital and
designed specifically to adapt to the changing demands of future audio, video delivery, and audio
storage systems while simultaneously retaining backwards compatibility with the existing Dolby
Digital 5.1-channel home theater systems in use today.
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, Surround EX, and the
double-D symbol are trademarks of Dolby Laboratories.
The Dolby Headphone technology provides a surround sound listening experience over
headphones.
When listening to multi-channel content such as DVD movies over headphones, the listening
experience is fundamentally different than listening to speakers. Since the headphone speaker
drivers are covering the pinna of the ear, the listening experience differs greatly from traditional
speaker playback. Dolby utilizes patented headphone perspective curves to solve this problem
and provides a non-fatiguing, immersive, home theater listening experience. Dolby Headphone
also delivers exceptional 3D audio from stereo material.
Manufactured under license from Dolby Laboratories. The double-D symbol is a trademark of
Dolby Laboratories.
Dolby Digital identifies the use of Dolby Digital audio coding for such consumer formats as DVD
and DTV. As with film sound, Dolby Digital can provide up to five full-range channels for left,
center, and right screen channels, independent left and right surround channels, and a sixth
(".1") channel for low-frequency effects.
Dolby Surround Pro Logic II is an improved matrix decoding technology that provides better
spatiality and directionality on Dolby Surround program material. It provides a convincing three-
dimensional sound field on conventional stereo music recordings. While conventional surround
programming is fully compatible with Dolby Surround Pro Logic II decoders, soundtracks will be
able to be encoded specifically to take full advantage of Pro Logic II playback, including separate
left and right surround channels. (Such material is also compatible with conventional Pro Logic
decoders.)
WELCOME
12
Dolby Digital EX creates six full-bandwidth output channels from 5.1-channel sources. This is
done using a matrix decoder that derives three surround channels from the two in the original
recording. For best results, Dolby Digital EX should be used with movies soundtracks recorded
with Dolby Digital Surround EX.
About Dolby Pro Logic IIx
Dolby Pro Logic IIx is fully compatible with Dolby Surround Pro Logic technology and can
optimally decode the thousands of commercially available Dolby Surround encoded video
cassettes and television programs with enhanced depth and spatiality. It can also process any
high-quality stereo or Advanced Resolution 5.1 channel music content into a seamless 6.1 or 7.1
channel listening experience.
Dolby Pro Logic IIx technology delivers a natural and immersing 7.1-channel listening experience
to the home theater environment. A product of Dolby's expertise in surround sound and matrix
decoding technologies, Dolby Pro Logic IIx is a complete surround sound solution that maximizes
the entertainment experience from stereo as well as 5.1 channel encoded sources.
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol
are trademarks of Dolby Laboratories.
*All trademarks belong to their original owners.
SPECIFICATIONS
13
The Cinema 11a is designed for long-term stability in virtually any home operating situation.
However, if the unit is operated outside the parameters outlined in this owner's manual, damage
may result. Please read this manual carefully before putting your new Cinema 11a processor into
operation.
The following section describes the Cinema 11a’s basic specifications. The specifications are
subject to change without notice or obligation.
AUDIO INPUTS / AUDIO OUTPUTS
...........................................................................................................................................................................
Audio Inputs 7 - Stereo Pairs with RCA connectors
1 - XLR pair
1 - 7.1 channel analog input with RCA connectors
...........................................................................................................................................................................
Digital Audio Inputs 7 - Coaxial (RCA) for the seven single ended inputs
7 - TOSLINK for the seven single ended inputs
1 - XLR for the balanced input
...........................................................................................................................................................................
HDMI Inputs 2 – HDMI V1.3 inputs
...........................................................................................................................................................................
Sample Rates 44.1, 48, 88.2, 96 or 192kHz
...........................................................................................................................................................................
Accepts 16-24 bits PCM audio, Dolby TrueHD, Dolby Plus, Dolby Digital
Ex, dts-HD Master Audio, dts-HD High Resolution Audio, dts and
dts-ES discrete data formats
...........................................................................................................................................................................
Main Audio Outputs 7.1 RCA, L/R, Center, LFE (Subwoofer), Side L/R, Rear L/R 7.1
XLR, L/R, Center, LFE (Subwoofer), Side L/R, Rear L/R
...........................................................................................................................................................................
HDMI Output 1 – HDMI V1.3 output
...........................................................................................................................................................................
Zone 2 Audio Outputs 1 - RCA stereo pair
1 - TOSLINK digital
...........................................................................................................................................................................
ANALOG AUDIO SECTION
...........................................................................................................................................................................
Input Impedance 100 k Ohms
...........................................................................................................................................................................
Output Impedance Main - RCA 330
Main - XLR 660
Zones 2 - 220
...........................................................................................................................................................................
Rated Input 2.0 Vrms
...........................................................................................................................................................................
Maximum Input 6.0 Vrms
...........................................................................................................................................................................
Rated Output (100 k load) 2.0 Vrms
...........................................................................................................................................................................
Minimum Load 5k
...........................................................................................................................................................................
Maximum Output RCA - 8.0 Vrms
XLR - 16.0 Vrms
SPECIFICATIONS
14
...........................................................................................................................................................................
Headphone Output 100mW into 32 Ohms at 0.2% THD+N
...........................................................................................................................................................................
Volume Control Range Main - -90.0 dB to +15.5 dB (1.0 dB increments)
Zone 2/Headphone - -90.0 dB to +15.5 dB (1.0 dB increments)
...........................................................................................................................................................................
Channel Separation 89 dB (1 kHz)
...........................................................................................................................................................................
Total Crosstalk b/t Inputs 89 dB (1 kHz)
...........................................................................................................................................................................
XLR Pin Configuration Pin 1: Ground
Pin 2: Positive
Pin 3: Negative
...........................................................................................................................................................................
DIGITAL AUDIO
All digital audio inputs are to S/PDIF electrical (75 Ohms, 0.5 V p-p), S/P DIF optical (Toslink), or
AES/EBU (110 Ohms, 0.5 V p-p) standards, 44.1kHz to 192kHz regardless of input.
...........................................................................................................................................................................
Analog to Digital Converters Burr-Brown PCM 1802
...........................................................................................................................................................................
Input Receiver Cirrus CS 8416
...........................................................................................................................................................................
Processor Dual 32 Bit Audio DSP at 516 MIPS
...........................................................................................................................................................................
Digital to Analog Converters Burr-Brown DSD 1796
...........................................................................................................................................................................
MAIN PATH
RCA and XLR Output, 48 kHz Sampling Rate for all Digital Signal Paths
...........................................................................................................................................................................
Frequency Response and Bandwidth
Analog - Direct Inputs 10 Hz to 20 kHz, 1 Hz to 120 kHz (-3 dB)
Analog - DSP Inputs at 24/96 10 Hz to 20 kHz, 2 Hz to 44 kHz (-3 dB)
Digital Inputs at 24/96 10 Hz to 20 kHz, 1 Hz to 44 kHz (-3 dB)
...........................................................................................................................................................................
THD+N (at Rated Input and Output)
Analog - Direct Inputs 0.005% (90 kHz BW)
Analog - DSP Inputs at 24/96 0.003% (AES17 filter)
Digital Inputs at 24/96 0.003% (AES17 filter)
...........................................................................................................................................................................
IMD (CCIF at 15 kHz)
Analog - Direct Inputs 0.001%
Analog - DSP Inputs at 24/48 0.001%
Digital Inputs at 24/48 0.001%
...........................................................................................................................................................................
SPECIFICATIONS
15
S/N Ratio (ref 2.0 Vrms)
Analog - Direct Inputs 108 dB
Analog - DSP Inputs at 24/96 105 dB
Digital Inputs at 24/96 107 dB
...........................................................................................................................................................................
IMD (CCIF at 15 kHz)
Analog - Direct Inputs 0.001%
Analog - DSP Inputs at 24/48 0.001%
Digital Inputs at 24/48 0.001%
...........................................................................................................................................................................
HDAM / AM Tuner
Frequency Range In 10kHz steps: 530kHz to 1,700kHz
Sensitivity (All Digital) -111dBm
S/N Ratio 50 dB typical, 43dB min
Distortion 0.7% typical, 2.0% max
One-Signal Selectivity (10kHz) 24 dB typical, 18dB min
...........................................................................................................................................................................
HDFM / FM Tuner
Frequency Range 87.9MHz to 107.9MHz
Sensitivity Hybrid mode -94dBm
All Digital -112dBm
Signal-to-Noise Ratio Mono 80dB (at 65 dBf)
Stereo 76dB (at 85 dBf)
Distortion Mono 0.08% (100 Hz)
0.08% (1 kHz)
0.2% (6 kHz)
Stereo 0.2% (100 Hz)
0.15% (1 kHz)
0.3% (6 kHz)
Capture Ratio 1.0 dB
Alternate Channel Selectivity 65 dB (400 kHz)
Stereo Separation 50 dB (1 kHz)
35 dB (30 Hz to 15 kHz)
Frequency Response 30 Hz to 15 kHz
Image Interference Ratio 50 dB
IF Interference Ratio 80 dB
AM Suppression Ratio 55 dB
Spurious Interference Ratio 70 dB
Antenna Input 75 Ohms unbalanced
...........................................................................................................................................................................
ZONE 2 PATHS
...........................................................................................................................................................................
Frequency Response/Bandwidth 20 Hz to 20 kHz, 3 Hz to 140 kHz (+0, -3 dB)
...........................................................................................................................................................................
THD+N (at Rated Input and Output) 0.06% (90 kHz BW)
...........................................................................................................................................................................
IMD (CCIF at 15 kHz) 0.06%
...........................................................................................................................................................................
S/N Ratio (ref 2.0 Vrms) 97 dB
...........................................................................................................................................................................
SPECIFICATIONS
16
CONTROL
...........................................................................................................................................................................
RS-232 Interface
Connection DB-9F, straight-wired
Pinout (Statement DI side) Pin 2: Tx, Pin 3: Rx, Pin 5: Ground
Baud Rate 57600
Configuration 8 data bits, 1 stop bit, no parity bits,
flow control (RTS, CTS, NONE)
...........................................................................................................................................................................
Trigger Outputs
Polarity 3.5 mm mono (tip positive), sleeve negative
Maximum Current at 12 VDC 150 mA (Triggers 1,2), 200 mA (Trigger 3)
Sequential Delay 100 ms
...........................................................................................................................................................................
POWER REQUIREMENTS
...........................................................................................................................................................................
Power Requirements 117VAC or 234VAC 50-60Hz
...........................................................................................................................................................................
Power Consumption Maximum 50 W
...........................................................................................................................................................................
CONTROLS AND DISPLAYS
17
FRONT PANEL
121
12
3
4
5
6
7
8910
11
13
1415
POWER
SUR.
MODE
CES 7.1
Cine m a 11a
192kHz/24 bit D/A Converter
Surround Sound Processor
AM/FM
PRO
LOGIC IIx
MASTER VOLUME
TUNER
HD RADIO PRESET NEO:6
MODE
<
<
<
>
INPUT
123 4
5
6
7
8
SETUP
ENTER
+
HDMI 1 HDMI 2 7.1 IN
1. POWER
Press once to turn the power ON.
Press again to turn the power OFF. The Cinema 11a will enter STANDBY and the blue
POWER LED will light.
2. BAND (AM)/(FM)
Press this button to select between the AM & FM frequency bands.
3. BAND HDAM/HDFM (HD RADIO)
Press this button to select between the HDAM & HDFM frequency bands.
4. PRESET
Press this button to preset and recall desired broadcasting stations.
5. PRESET
Press this button to preset and recall desired broadcasting stations.
6. INPUT SELECTOR
Press one of these buttons to select the Audio input source.
7. PRO LOGIC IIx
Press this button to select either the Pro Logic II decoding or Pro Logic IIx decoding
8. SUR. MODE
Press this button to select the surround sound mode as a part of Dolby Digital or DTS
decoding; music or movie selections.
9. NEO:6
Press this button to turn the NEO:6 mode ON or OFF.
10. CES 7.1
Press this button to select DOLBY EX AUTO, DOLBY EX ON, or DOLBY EX OFF mode.
CONTROLS AND DISPLAYS
18
121
12
3
4
5
6
7
8910
11
13
1415
POWER
SUR.
MODE
CES 7.1
Cine m a 11a
192kHz/24 bit D/A Converter
Surround Sound Processor
AM/FM
PRO
LOGIC IIx
MASTER VOLUME
TUNER
HD RADIO PRESET NEO:6
MODE
<
<
<
>
INPUT
123 4
5
6
7
8
SETUP
ENTER
+
HDMI 1 HDMI 2 7.1 IN
11. MASTER VOLUME KNOB
Use this knob to adjust the overall sound level.
12. INFRARED RECEIVING SENSOR WINDOW
This window receives infrared signals from the remote control.
13. ALPHANUMERIC DISPLAY
This twenty-character display provides a wide range of information concerning the
operation of the Cinema 11a.
14. NAVIGATION / ENTER
Use the four navigation buttons to move through menu options shown on the Cinema 11a
display. Use the ENTER button to confirm the selections made in the menus.
15. HEADPHONE JACK
Use for Dolby Headphone playback of movies or personal listening to the AM/FM radio
section.
CONTROLS AND DISPLAYS
19
REAR PANEL
LEFT
LEFT
RIGHT
RIGHT
ANALOG AUDIO INPUT
ANALOG 7.1 INPUT
7.1 PREAMPLIFIER OUTPUT
7.1 PREAMPLIFIER OUTPUT
RS 232
1
IR INPUT ZONE
TRIGGERS
123
ZONE 2
AUDIO
OUT
FL
SL CEN
SBL
FR
SR
SW
SBR
FL
FL
SL
CEN SBL
SBL
FR
FR
SR
SR
SW
SW
SBR
SBR
A C PO WER
[ ] 117V 50/60 Hz
[ ] 220V 50/60 Hz
Cinema 11a Surround Sound Processor
CARY AUDIO DESIGN
12345
1
324
678
56 78
DIGI TAL I NP UT
AUTO
SETUP
MIC- IN
FM
75
AM LOOP
ANTENNA
ZONE 2
DIGITAL
OUT
SL CEN
HDMI 1 INPUT
HDMI 2 INPUT
HDMI OUTPUT
2
12
12
3
4
5
6
7
8
9
10
11
13
14
151617
18
19
1. ANALOG AUDIO IN (INPUT 1) XLR (L + R)
Use these jacks for connection to balanced CD or DVD player analog output connections.
2. ANALOG AUDIO IN (INPUTS 2 THROUGH 8) RCA
Use these jacks for connection to CD, DVD, TV, or VCR input options.
3. ANALOG AUDIO 7.1 INPUT
By connecting a DVD audio player, SACD multi channel player, or other component that
has a multi-channel output, you can playback the analog audio with 5.1 channel or 7.1
channel outputs.
4. 2
ND
ZONE ANALOG AUDIO OUT
These jacks supply the analog stereo audio outputs to an external audio amplifier used to
power the speakers in the remote zone.
5. 7.1 PREAMPLIFIER OUTPUTS
Use these jacks to connect to the main five- or seven-channel power amplifiers.
6. 7.1 PREAMPLIFIER OUTPUTS XLR
Use these jacks to connect to the main five or seven channel power amplifiers.
7. AC INLET CONNECTOR
Plug the power cord into this AC inlet and then into the power outlet on the wall.
8. DC TRIGGER OUTPUT TERMINALS
Connect devices that need to be triggered by DC + 12V. (Screen, curtains, lights, etc.)
9. IR INPUT
Use the 1 and zone 2 Ext remote jacks to connect external IR sensors. When the unit is
installed where it is not otherwise visible to the remote, connect an optional, external
sensor and the 1 (Main) jack will be activated. The Cinema 11a should be used for
connections to the power amplifiers for the main room speaker. The device connected to
the zone trigger will only be activated when the Multi-Zone system is turned on. Connect
it to the amplifier used to power the speakers in the second zone (Zone 2).
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53

Cary Audio Design 11a User manual

Category
AV receivers
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI