ONKYO PR-SC5530 Owner's manual

PR-SC5530

AV CONTROLLER

Advanced Manual

CONTENTS

AM/FM Radio Receiving Function 2

Tuning into a Radio Station 2

Registering an AM/FM Radio Station 3

Using RDS (European and Asian models) 3

Playing Content from a USB Storage Device 5

Listening to Internet Radio 6

About Internet Radio 6

TuneIn 6

Pandora

®

–Getting Started (U.S. only) 7

SiriusXM Internet Radio (North American only) 8

Slacker Personal Radio (North American only) 9

Registering Other Internet Radios 10

DLNA Music Streaming 12

About DLNA 12

Configuring the Windows Media

®

Player 12

DLNA Playback 12

Controlling Remote Playback from a PC 13

Music Streaming from a Shared Folder 14

About Shared Folder 14

Setting PC 14

Playing from a Shared Folder 14

Using Remote Controller for Playing Music Files 16

About the Remote Controller 16

Remote Controller Buttons 16

Icons Displayed during Playback 16

Using the Listening Modes 17

Selecting Listening Mode 17

Contents of Listening Modes 18

Checking the Input Format 22

Advanced Settings 23

How to Set 23

1.Input/Output Assign 24

2.Speaker Setup 27

3.Audio Adjust 34

4.Source Setup 36

5.Listening Mode Preset 40

6.Miscellaneous 41

7.Hardware Setup 51

8.Remote Controller Setup 58

9.Lock Setup 58

Operating Other Components with the Remote Controller

59

Functions of REMOTE MODE Buttons 59

Programming Remote Control Codes 59

TV Operation 60

Blu-ray Disc Player/DVD Player/DVD Recorder Operation

61

VCR/PVR Operation 61

Satellite Receiver/Cable Receiver Operation 62

CD Player Operation 62

Cassette Tape Deck Operation 62

To Operate CEC-compatible Components 63

Assigning Another Device's Remote Controller

Functions to the Unit's Remote Controller 63

Assigning an Operation Sequence to the Remote

Controller (Macro Function) 63

Advanced Speaker Connection 66

Bi-Amping 66

Connecting Dipole Speakers 66

Connecting and Operating Onkyo RI Components 67

About RI Function 67

RI Connection and Setting 67

iPod/iPhone Operation 68

Control Function between the Unit and External Component

69

Firmware Update 70

About Firmware Update 70

Updating the Firmware via Network 70

Updating the Firmware via USB 71

Troubleshooting 73

Reference Information 80

E

n

AM/FM Radio Receiving Function

2

AM/FM Radio Receiving Function

Tuning into a Radio Station



Tuning into stations automatically

1.

Press TUNER on the main unit several times to select

either "AM" or "FM".

2.

Press TUNING MODE so that the "AUTO" indicator on

the display lights.

3.

Press TUNING to start automatic tuning.

 Searching automatically stops when a station is

found. When tuned into a radio station, the "

TUNED " indicator on the display lights. If FM stereo

broadcasting is tuned, the "FM STEREO" indicator

lights.

 No sound is output while the "

TUNED " indicator

is off.

When the signal from an FM radio station is weak:

Radio wave may be weak depending on the building

structure and environmental conditions. In that case,

manually tune into the radio station of your choice by

referring to the next section.



Tuning into stations manually

1.

Press TUNER on the main unit several times to select

either "AM" or "FM".

2.

Press TUNING MODE so that the "AUTO" indicator on

the display goes off.

3.

Press TUNING to select the desired radio station.

 The frequency changes by 1 step each time

you press the button. The frequency changes

continuously if the button is held down and stops

when the button is released. Tune by looking at the

display.

To return the display to "AUTO": Press TUNING MODE

on the main unit again. A station is automatically tuned.

Normally "AUTO" should be displayed.



Tuning into stations by frequency

It allows you to directly enter the frequency of the radio

station you want to listen to.

1.

Press TUNER on the remote controller several times to

select either "AM" or "FM".

2.

Press D.TUN.

3.

Using the number buttons, enter the frequency of the

radio station within 8 seconds.

 To enter 87.5 (FM), for example, press 8, 7, 5, or 8,

7, 5, 0. If you entered a wrong number, press D.TUN

and enter a correct one.

1110

DIMMER

D.TUN

123

456

789

0

+

10

AM/FM Radio Receiving Function

3

Registering an AM/FM Radio Station

It allows you to register up to 40 of your favorite AM/FM

radio stations. Registering radio stations in advance allows

you to tune into your radio station of choice directly.



Registering a Station

1.

Tune into the AM/FM radio station you want to register.

2.

Press MEMORY on the unit so that the preset number

on the display flashes.

3.

Repeatedly press PRESET to select a number

between 1 and 40 while the preset number is flashing

(about 8 seconds).

4.

Press MEMORY again to register the station.

 When the station is registered, the preset number

stops flashing.

 Repeat this procedure for all of your favorite AM/FM

radio stations.



Selecting a Preset Radio Station

1.

Press CH +/- on the remote controller to select a preset

number.

 Alternatively you can press PRESET

on the

main unit. You can also select by directly entering

the preset number with the number buttons on the

remote controller.

ALBUM

CH

DISC



Deleting a Preset Radio Station

1.

Press CH +/- on the remote controller to select the

preset number to delete.

ALBUM

CH

DISC

2.

Press and hold MEMORY on the main unit and press

TUNING MODE to delete the preset number.

 When deleted, the number on the display goes off.

Using RDS (European and Asian models)

RDS stands for Radio Data System and is a method of

transmitting data in FM radio signals.

r

RDS works only in areas where RDS broadcasts are

available.

r

In some cases, the text information appeared on the

display is not identical to the content transmitted by

the RDS station. Furthermore, unexpected characters

may be displayed when the unit receives unsupported

characters. However, this is not a malfunction.

r

If the signal from an RDS station is weak, the RDS data

may be displayed continuously or not at all.

PS (Program Service): Tuning into a radio station

distributing Program Service information displays the

radio station name. Pressing DISPLAY displays the

frequency for 3 seconds.

RT (Radio Text): Tuning into a radio station transmitting

Radio Text information displays text on the display of the

unit.

PTY (Program Type): Allows you to search for RDS

stations by program type.

TP (Traffic Program): Allows you to search for radio

stations transmitting traffic information.



Displaying Radio Text (RT)

1.

Press RT/PTY/TP on the main unit once.

 The Radio Text (RT) is displayed scrolling across

the display. "No Text Data" is displayed when no text

information is available.

AM/FM Radio Receiving Function

4



Searching by Type (PTY)

1.

Press RT/PTY/TP on the main unit twice.

 The current program type appears on the display.

2.

Press PRESET to select the type of program to

search for.

 The following RDS station types are displayed:

None

News (News reports)

Affairs (Current affairs)

Info (Information)

Sport

Educate (Education)

Drama

Culture

Science (Science and technology)

Varied

Pop M (Pop music)

Rock M (Rock music)

Easy M (Middle of the road music)

Light M (Light classics)

Classics (Serious classics)

Other M (Other music)

Weather

Finance

Children (Children’s programmes)

Social (Social affairs)

Religion

Phone In

Travel

Leisure

Jazz (Jazz music)

Country (Country music)

Nation M (National music)

Oldies (Oldies music)

Folk M (Folk music)

Document (Documentary)

3.

Press ENTER to search the radio stations of the

selected type.

4.

When such a radio station is found, the indication on the

display flashes. Then, press ENTER again.

 If no stations are found, the message “Not Found” is

displayed.



Listening to Traffic Information (TP)

1.

Press RT/PTY/TP on the main unit three times.

 "[TP]" will be displayed if traffic information is

transmitted by the radio station you are tuned in.

"TP" only is displayed if no traffic information is

available.

2.

Press ENTER to search a radio station distributing traffic

information.

3.

When such a radio station is found, searching stops and

playing traffic information starts.

 "Not Found" is displayed if no radio station

distributing traffic information is found.

5

Playing Content from a USB

Storage Device

z

Operation: You can set up by viewing the guidance

displayed on the TV screen. To display the guidance, you

need to make HDMI connection between the unit and

TV. Select the item with the cursor buttons of the remote

controller and press ENTER to confirm your selection. To

return to the previous screen, press RETURN.

RETURN

PLAYLISTPLAYLIST

ENTER



Playing Back

1.

Press USB on the remote controller to select "USB".

USB

2.

Plug your USB storage device with the music files into

the USB port of the unit so that "USB" lights on the

display.

 If the "USB" indicator flashes, check whether the

USB storage device is plugged in properly.

 Do not unplug the USB storage device while

"Connecting..." is appeared on the display. This may

cause data corruption or malfunction.

3.

Press ENTER.

 The list of folders and music files on the USB storage

device is displayed. Select the folder with the cursors

and press ENTER to confirm your selection.

4.

With the cursors, select the music file to play, and then

press ENTER or

to start playback.

ENTER

Listening to Internet Radio

6

Listening to Internet Radio

About Internet Radio

Internet radio, also called net radio, web radio or streaming

radio, is an audio service accessible at the websites of

service providers who distribute music and audio programs

in digital format. There are numerous websites all over the

world, from terrestrial station, special station to personal

website that provide such a service.

The unit comes preset with Internet radio stations (

¼

)

such as TuneIn for you to enjoy these services, just by

connecting the unit to the Internet.

½

Network services or contents may become unavailable if the service

provider terminates its service.

TuneIn

With more than 70,000 radio stations and 2 million on-

demand programs registered, TuneIn is a service where

you can enjoy music, sports and news from all over the

world.

z

Operation: You can set up by viewing the guidance

displayed on the TV screen. To display the guidance, you

need to make HDMI connection between the unit and

TV. Select the item with the cursor buttons of the remote

controller and press ENTER to confirm your selection. To

return to the previous screen, press RETURN.

RETURN

PLAYLISTPLAYLIST

ENTER



Playing Back

1.

Press NET on the remote controller to display NET TOP

screen.

 The "NET" indicator on the display stays lit.

 Alternatively you can select "Network Service" in the

HOME menu.

NET

2.

Select "TuneIn" with the cursors and press ENTER to

display the TuneIn top screen.

3.

With the cursors, select a radio station or program and

press ENTER to start playing.



Regarding the TuneIn Menu

To display the TuneIn menu, press MENU or ENTER while

playing a radio station. Selecting the corresponding menu

item with the cursors and pressing ENTER allows you to

perform the following operations:

Add to My Presets: Registers radio stations and

programs in your "My Presets" within TuneIn. This allows

you to play registered radio stations and programs with

a simple operation. ("My Presets" is not displayed if it is

empty.)

Remove from My Presets: Deletes a radio station or

program from your "My Presets" within TuneIn.

Report a problem: Reports a problem or interactively

solves a problem related to TuneIn.

View Schedule: Displays the radio station or program

schedule.

Clear recents: Clears all radio stations and programs

from the "Recents" within TuneIn. (This menu is

displayed only when a radio station or program inside

the "Recents" is being played.)

Add to My Favorites: Registers radio stations and

programs in "My Favorites" of "Network Service".

This allows you to play registered radio stations and

programs with a simple operation.

Listening to Internet Radio

7



Regarding the TuneIn Account

Creating an account on the TuneIn website (tunein.com)

and logging in it from the unit allows you to automatically

add radio stations and programs to your "My Presets" on

the unit as you save them on the website .

To display a radio station registered in "My Presets", you

must log into TuneIn from the unit. To log in, select "Login" -

"I have a TuneIn account" in the "TuneIn" top list on the unit,

and then enter your user name and password.

r

If you associate the device on My Page within the TuneIn

website using the registration code obtained by selecting

"Login" - "Login with a registration code" on the unit, you

can log in without entering the user name and password.

Pandora

®

–Getting Started (U.S. only)

Pandora is a free, personalized Internet radio service that

plays the music you know and helps you discover music

you’ll love.

z

Operation: You can set up by viewing the guidance

displayed on the TV screen. To display the guidance, you

need to make HDMI connection between the unit and

TV. Select the item with the cursor buttons of the remote

controller and press ENTER to confirm your selection. To

return to the previous screen, press RETURN.

RETURN

PLAYLISTPLAYLIST

ENTER



Playing Back

1.

Press NET on the remote controller to display NET TOP

screen.

 The "NET" indicator on the display stays lit. To

display the NET TOP screen, you can alternatively

press HOME, select "Network Service" on the

displayed HOME menu, and then press ENTER.

NET

2.

Select “Pandora” with the cursors, and then press

ENTER.

3.

Use / to select “I have a Pandora Account” or “I’m new

to Pandora” and then press ENTER.

If you are new to Pandora select “I’m new to Pandora”.

You will see an activation code on your TV screen.

Please write down this code. Go to an Internet

connected computer and point your browser to www.

pandora.com/onkyo. Enter your activation code and then

follow the instructions to create your Pandora account

and your personalized Pandora stations. You can create

your stations by entering your favorite tracks and artists

when prompted. After you have created your account

and stations you can return to your Onkyo receiver and

press ENTER to begin listening to your personalized

Pandora.

If you have an existing Pandora account, you can

add your Pandora account to your Onkyo receiver by

selecting “I have a Pandora Account” and logging in with

your email and password.

 If you want to use multiple user accounts, see “Using

Multiple Accounts”. Login can be made from the

“Users” screen.

4.

To play a station, use / to select the station from your

station list, and then press ENTER. Playback starts and

the playback screen appears.



Create a New Station

Enter the name of a track, artist, or genre and Pandora will

create a unique radio station for you based on the musical

qualities of that track, artist, or genre.

I like this track: Give a track “thumbs-up” and Pandora

will play more music like it.

I don’t like this track: Give a track “thumbs-down” and

Pandora will ban that track from the current station.

Why is this track playing?: Discover some of the

musical attributes that Pandora uses to create your

personal radio stations.

I’m tired of this track: If you are tired of a track, you

can put the track to sleep and Pandora will not play it for

one month.

Create station from this artist: Creates a radio station

from this artist.

Create station from this track: Creates a radio station

from this track.

Delete this station: This will permanently delete a

station from your Pandora account. All of your thumbs

feedback will be lost should you choose to re-create the

station with the same track or artist.

Rename this station: Lets you rename the current radio

station.

Bookmark this artist: Pandora will bookmark your

favorite artist for your profile on www.pandora.com.

Bookmark this track: Pandora will bookmark the

current track and allow you to buy them all from Amazon

or iTunes in one step!

Add to My Favorites: Adds a station to My Favorites

list.

PANDORA, the PANDORA logo, and the Pandora trade

dress are trademarks or registered trademarks of Pandora

Media, Inc. Used with permission.

Listening to Internet Radio

8

SiriusXM Internet Radio (North American only)

If you want to listen to the service, you must subscribe. To

subscribe go to www.siriusxm.com/internetradio with your

computer. When you subscribe, you will be provided with a

username and password which has to be entered into the

AV controller. To use SiriusXM Internet Radio, you must

have your AV controller connected to the Internet. Using the

remote control, follow these steps:

z

Operation: You can set up by viewing the guidance

displayed on the TV screen. To display the guidance, you

need to make HDMI connection between the unit and

TV. Select the item with the cursor buttons of the remote

controller and press ENTER to confirm your selection. To

return to the previous screen, press RETURN.

RETURN

PLAYLISTPLAYLIST

ENTER



Playing Back

1.

Press NET on the remote controller to display NET TOP

screen.

 The "NET" indicator on the display stays lit. To

display the NET TOP screen, you can alternatively

press HOME, select "Network Service" on the

displayed HOME menu, and then press ENTER.

NET

2.

Select “SiriusXM Internet Radio” with the cursors, and

then press ENTER.

3.

Select “Sign In”, and then press ENTER. If you have an

existing SIRIUS account, you can sign in by selecting

“Sign In”. Enter your user name and password in the

next keyboard screen, or in Web Setup. If you don’t

know your username or password, call Sirius XM at

(888) 539-7474 for assistance.

 If you want to use multiple user accounts, see “Using

Multiple Accounts”. Login can be made from the

“Users” screen.

Using the keyboard screen

1

Use / / / and ENTER to enter your user name

and password.

2

Select “OK”.

3

Press ENTER. The “Confirm your entries” screen

appears.

4

Press ENTER. “Please wait...” appears and then

“SiriusXM Internet Radio” screen appears which

displays the category available for selection.

4.

Use / to select the category and then press ENTER.

 The channel list screen for the selected category

appears.

5.

Use / to select the desired channel and then press

ENTER.

The playback screen for the selected channel appears

and you can listen to SiriusXM Internet Radio. You can

control the tracks with the buttons on the remote control.

Enabled buttons:

, , ,

Add to My Favorites: Adds a channel to My Favorites

list.

Add to Presets: Adds the currently playing station to

presets list.

Delete from Presets: Deletes the currently playing

station from presets list.

SiriusXM Internet Radio subscriptions are sold separately

and are governed by the Sirius Terms and Conditions (see

www.sirius.com). Be sure to read this agreement before you

purchase your subscription.

Sirius, XM and all related marks and logos are trademarks

of Sirius XM Radio Inc. and its subsidiaries. All rights

reserved.

Listening to Internet Radio

9

Slacker Personal Radio (North American only)

z

Operation: You can set up by viewing the guidance

displayed on the TV screen. To display the guidance, you

need to make HDMI connection between the unit and

TV. Select the item with the cursor buttons of the remote

controller and press ENTER to confirm your selection. To

return to the previous screen, press RETURN.

RETURN

PLAYLISTPLAYLIST

ENTER



Playing Back

1.

Press NET on the remote controller to display NET TOP

screen.

 The "NET" indicator on the display stays lit. To

display the NET TOP screen, you can alternatively

press HOME, select "Network Service" on the

displayed HOME menu, and then press ENTER.

NET

2.

Select “Slacker Personal Radio” with the cursors, and

then press ENTER.

3.

If you do not have an account, create one on the Slacker

website (www.slacker.com) with your computer. If you

already have a Slacker account, select “Sign in to your

account” and then press ENTER. The keyboard screen

appears. You can enter information from the remote

control or the keys on the main unit.

4.

If there are no mistakes in the information you have

entered, use

/ / / to select “OK” then press ENTER.

An account information confirmation screen appears.

5.

If you do not have an account, select “Access without

Sign In” and press ENTER to use a restricted version of

the service. Note that use will be restricted.

 If you want to use multiple user accounts, see “Using

Multiple Accounts”. Login can be made from the

“Users” screen.

6.

Use / to select a menu item and then press ENTER.

To sign out, use

/ to select “Sign out” from this screen

and then press ENTER.

7.

Use / to select a station and then press ENTER or

to start playback from the station. The playback screen

appears.

8.

You can control the tracks with the buttons on the

remote control.

Enabled buttons:

, , ,

Rate Song as Favorite: Stores information to server,

making it more likely that the song will be played again.

Ban Song: Stores information to server, making it less

likely that the song will be played again.

Ban Artist: Stores information to server, making it less

likely that the songs from this artist will be played again.

Mark Favorite: Adds the currently playing station to your

favorites.

Unmark Favorite: Deletes the currently playing station

from your favorites.

Add song to Library: Adds the currently playing track to

your library.

Delete song from Library: Deletes the currently playing

track from your library.

Add to My Favorites: Adds a station or song to My

Favorites list.

Using Multiple Accounts: The AV controller supports

multiple user accounts, which means you can freely switch

between several logins. After registering user accounts,

login is performed from the “Users” screen.

Press MENU while the Users screen is displayed. "Add

new user", "Remove this user" menu appear. You can either

store a new user account, or delete an existing one.

r

Some of the services don’t allow the use of multiple user

accounts.

r

You can store up to 10 user accounts.

r

To switch between accounts you must first log out from

the current account, and log in again on the "Users"

screen.

Listening to Internet Radio

10

Registering Other Internet Radios

To listen to other Internet radio program, register the

program in the "My Favorites" list on the NET TOP screen

as described below. The unit supports Internet radio stations

stored in the following formats: PLS (URL ending in .pls),

M3U (URL ending in .m3u) and RSS (URL ending in rss/rdf/

xml).

r

You can register up to 40 Internet radio stations.

r

Depending on the data type and file format for playback,

you may not be able to play an Internet radio station

even when its format is PLS, M3U or Podcast (RSS).

r

Available services may vary depending on your area of

residence.

z

Operation: You can set up by viewing the guidance

displayed on the TV screen. To display the guidance, you

need to make HDMI connection between the unit and

TV. Select the item with the cursor buttons of the remote

controller and press ENTER to confirm your selection. To

return to the previous screen, press RETURN.

RETURN

PLAYLISTPLAYLIST

ENTER



Registering a Station

Before starting the procedure: The name and URL of

the radio station that you want to add are required for

registration. Check them before starting the procedure.

1.

Press NET on the remote controller to display NET TOP

screen.

 The "NET" indicator on the display stays lit.

NET

2.

Select "My Favorites" with the cursors and press ENTER

to display the "My Favorites" list screen.

3.

Select a blank area of "My Favorites" with the cursors

and press MENU to display the menu screen.

MENU

4.

Select "Create new station" with the cursors and press

ENTER to display the keyboard screen.

5.

Enter the name and URL of the radio station to add.

 Select "Shift" and press ENTER to toggle between

upper and lower case. Select "

" or " " and press

ENTER to move the cursor to the selected direction.

Select "Back Space" and press ENTER to delete the

character at the left of the cursor position.



Registering a Station with PC

Before starting the procedure: The name and URL of

the radio station that you want to add are required for

registration. Check them before starting the procedure.

1.

Press RECEIVER on the remote controller.

 Always press RECEIVER first to change the remote

controller to RECEIVER mode (the mode to operate

this unit) since its mode may be changed to operate

another component.

2.

Press HOME to display the HOME menu.

3.

Select "Setup" with the cursors, and then press ENTER.

4.

With the cursors, select "7. Hardware Setup" - "Network"

-" IP Address" to display the IP address.

 Write down the IP address since you will need it

later.

5.

Open the Internet browser on your PC or smartphone

and enter the IP address of the unit in the URL field.

 When using Internet Explorer, you can alternatively

select "Open" in the "File" menu to enter the IP

address.

 Information of the unit is displayed on the browser.

("WEB Setup")

6.

Click "My Favorites" tab, then enter the name and URL

of the Internet radio station.

7.

Click "Save" to register the entered Internet radio station

in "My Favorites".

Listening to Internet Radio

11

To rename the registered radio station: When the radio

station is selected from the "My Favorites" list, press MENU

to display the menu screen. Select "Rename this station"

with the cursors and press ENTER to display the keyboard

screen. Rename the station as desired.

r

Radio stations can be renamed also from "WEB Setup".



Playing a Registered Radio Station

1.



screen.

 The "NET" indicator on the display stays lit.

NET

2.

Select "My Favorites" with the cursors and press ENTER

to display the registered Internet radio stations.

3.

Select a radio station with the cursors and press ENTER

to start playing.



Deleting a Registered Radio Station

1.



screen.

 The "NET" indicator on the display stays lit.

NET

2.

Select "My Favorites" with the cursors and press ENTER

to display the registered Internet radio stations.

3.

Select the radio station with the corsors to delete and

press MENU to display the menu screen.

MENU

4.

With the cursors, select "Delete from My Favorites", and

then press ENTER. A confirmation screen will appear.

5.

With the cursors, select "OK", and then press ENTER to

delete the radio station.

 Select "Back" if you return to the previous screen.

 Radio stations can be deleted also from "WEB

Setup".

DLNA Music Streaming

12

DLNA Music Streaming

About DLNA

Digital Living Network Alliance (DLNA) can be referred

to as a technology standard or the industry group to

develop the technology standard to interconnect and use

AV components, computers and other devices in a home

network. This unit allows you to use DLNA to play music

files stored on a computer or a hard disk connected to your

home network (NAS device). Make sure this unit and a

computer or NAS device are connected to the same router.

Internet radio

PC

NAS

Router

r

To stream a music file, you need a NAS device with

DLNA server functions or a PC where a player (e.g.,

Windows Media

®

Player 11 or Windows Media

®

Player

12) with DLNA server functions is installed. To enable

streaming with Windows Media® Player 11 or Windows

Media

®

Player 12, you must first configure the settings.

Configuring the Windows Media

®

Player



Windows Media

®

Player 11

1.

Turn on your PC and start Windows Media

®

Player 11.

2.

In the "Library" menu, select "Media Sharing" to display

a dialog box.

3.

Select the "Share my media" check box, and then click

"OK" to display the compatible devices.

4.

Select this unit, and then click "Allow".

 When it is clicked, the corresponding icon is

checked.

5.

Click "OK" to close the dialog.



Windows Media

®

Player 12

1.

Turn on your PC and start Windows Media

®

Player 12.

2.

In the "Stream" menu, select "Turn on media streaming"

to display a dialog box.

 If media streaming is already turned on, select "More

streaming options..." in the "Stream" menu to list

players in the network, and then go to step 4.

3.

Click "Turn on media streaming" to list players in the

network.

4.

Select this unit in "Media streaming options" and check

that it is set to "Allow".

5.

Click "OK" to close the dialog.

DLNA Playback

z

Operation: You can set up by viewing the guidance

displayed on the TV screen. To display the guidance, you

need to make HDMI connection between the unit and

TV. Select the item with the cursor buttons of the remote

controller and press ENTER to confirm your selection. To

return to the previous screen, press RETURN.

RETURN

PLAYLISTPLAYLIST

ENTER



Playing Back

1.

Start the server (Windows Media

®

Player 11, Windows

Media

®

Player 12, or NAS device) containing the music

files to play.

2.

Press NET on the remote controller to display NET TOP

screen.

 The "NET" indicator on the display stays lit. If the

"NET" indicator flashes, the unit is not properly

connected to the network. When using a wired LAN

connection, check the Ethernet cable connection,

and when using a wireless LAN connection, check

whether the "Wi-Fi" indicator on the left side of the

unit stays lit.

NET

3.

Select "DLNA" with the cursors and press ENTER.

4.

Select the target server with the cursors and press

ENTER to display the items list screen.

 Searching does not work in servers that do not

support search functions.

DLNA Music Streaming

13

 The unit cannot access pictures and videos stored

on servers.

 Contents stored on the server may not be displayed

depending on the server sharing settings.

5.

With the cursors, select the music file to play, and then

press ENTER or

to start playback.

 If "No Item." is displayed, check whether the network

is properly connected.

ENTER

Controlling Remote Playback from a PC

You can use this unit to play music files stored on your PC

by operating the PC inside your home network. The unit

supports remote playback with Windows Media

®

Player 12.

To use the remote playback function with Windows Media

®

Player 12, Windows Media

®

Player 12 must be configured

in advance.

r

Using a DLNA-compatible controller (such as an

Android application), you can select a music file stored

on Windows Media

®

Player 12 and stream to this unit

by operating the controller. For information on how to

remotely play using the controller, refer to the controller's

instruction manual.



Setting PC

1.

Turn on your PC and start Windows Media

®

Player 12.

2.

In the "Stream" menu, select "Turn on media streaming"

to display a dialog box.

 If media streaming is already turned on, select "More

streaming options..." in the "Stream" menu to list

players in the network, and then go to step 4.

3.

Click "Turn on media streaming" to list players in the

network.

4.

Select this unit in "Media streaming options" and check

that it is set to "Allow".

5.

Click "OK" to close the dialog box.

6.

Open the "Stream" menu and check that "Allow remote

control of my Player..." is checked.



Remote playback

1.

Turn on the power of the unit.

2.

Turn on your PC and start Windows Media

®

Player 12.

3.

Select and right-click the music file to play with Windows

Media

®

Player 12.

 To remotely play a music file on another server, open

the target server from "Other Libraries" and select

the music file to play.

4.

Select this unit in "Play to" to open the "Play to" window

of Windows Media

®

Player 12 and start playback on the

unit.

 Operations during remote playback are possible from

the "Play to" window on the PC. The playback screen

is displayed on the TV connected to the HDMI output

of the unit. If your PC is running on Windows

®



"Play to", and then select this unit.

5.

Adjust the volume using the volume bar on the "Play to"

window.

 Sometimes, the volume displayed on the remote

playback window may differ from that appeared on

the display of the unit.

 When the volume is adjusted from the unit, the value

is not reflected in the "Play to" window.

 This unit cannot play music files remotely in the

following conditions.

– It is using a network service.

– It is playing a music file on a USB storage device.

– "Agree" was not selected in the "DISCLAIMER"

screen that was displayed when the NET input

was selected on the unit for the first time.

Music Streaming from a Shared Folder

14

Music Streaming from a Shared

Folder

About Shared Folder

A shared folder is configured in a network device such as a

PC or NAS (hard disk connected to your home network) for

access from other users.

You can play music files in a shared folder on your PC or

NAS connected to the same home network as that of the

unit. To play music files in a shared folder, you must first

configure Windows

®



®



and PC or NAS device are connected to the same router.

Internet radio

PC

NAS

Router

r

The sharing options must be configured and a shared

folder created on the PC in advance.

r

For information on how to configure the NAS device

and create a shared folder, refer to the NAS device's

instruction manual.

Setting PC



Configuring the Sharing Options

1.

Select "Choose Home group and Sharing Options" on

the "Control Panel".

 If the menu is not displayed, check whether "View

by" is set to "Category".

2.

Select "Change advanced sharing settings".

3.

Check whether the following radio buttons are selected

in "Home or Work":

"Enable network discovery"

"Turn on file and printer sharing"

"Turn on sharing so anyone with network access can

read and write files in the Public folders"

"Turn off password protected sharing"

4.

Select "Save Changes" and click "OK" on the dialog box.



Creating a Shared Folder

1.

Select and right-click the folder to share.

2.

Select "Properties".

3.

Select "Advanced Sharing" on the "Sharing" tab.

4.

Select "Share this folder" check box and click "OK".

5.

Select "Share" for "Network File and Folder Sharing".

6.

Select "Everyone" from the pull-down menu. Click "Add",

and then "Share".

 To set user name and password to a shared folder,

set "Permissions" in "Advanced Sharing" on the

"Sharing" tab.

 Check whether a workgroup is set.

Playing from a Shared Folder

z

Operation: You can set up by viewing the guidance

displayed on the TV screen. To display the guidance, you

need to make HDMI connection between the unit and

TV. Select the item with the cursor buttons of the remote

controller and press ENTER to confirm your selection. To

return to the previous screen, press RETURN.

RETURN

PLAYLISTPLAYLIST

ENTER



Playing Back

1.

Press NET on the remote controller to display NET TOP

screen on the TV.

 The "NET" indicator on the display stays lit. If the

"NET" indicator flashes, the unit is not properly

connected to the network. When using a wired LAN

connection, check the Ethernet cable connection,

and when using a wireless LAN connection, check

whether the "Wi-Fi" indicator on the left side of the

unit is lit.

NET

Music Streaming from a Shared Folder

15

2.

Select "Home Media" with the cursors, and then press

ENTER.

3.

Select the target server with the cursors, and then press

ENTER.

 You can check the server name of your PC from the

PC properties.

4.

Select the target shared folder with the cursors, and

then press ENTER.

5.

If a username and password is required, enter the

necessary login information.

 The login information is the account information set

at the time of creating the shared folder.

 Once entered, the login information will be

remembered from the next time onward.

6.

With the cursors, select the music file to play, and then

press ENTER or

to start playback.

ENTER

Using Remote Controller for Playing Music Files

16

Using Remote Controller for

Playing Music Files

About the Remote Controller

The remote controller of this unit allows you to play music

files stored on USB storage devices, Internet radio, PCs

and NAS devices on your home network, as well as on

Bluetooth-enabled devices. It also allows you to view

information of the music file being played and perform

various other operations.

r

Available buttons may vary depending on the service

and device to play.

r

Some buttons cannot be used with Bluetooth-enabled

devices. Furthermore, the Bluetooth-enabled devices

must support the AVRCP profile. Some devices may not

be operated, even when they support AVRCP profile.

Remote Controller Buttons

1.

Press INPUT SELECTOR (PC, NET, USB or

BLUETOOTH) appropriate for the input source on the

remote controller.

PC

USBNET

BLUETOOTH

2.

Operate the remote controller by referring to the name

and function of each of the buttons.

PLAYLISTPLAYLIST

RETURN

PREV CH

MENU

GUIDE

TOP MENU

ENTER

ALBUM

CH

DISC

5

6

7

8

9

3

1

2

4

1

TOP MENU button: This button displays the top

menu for each media or server.

2

/ , ENTER

button

: These buttons navigate through

items and activate the selected item.

/ button: These buttons allow you to navigate to

another page when the list is broken across several

pages.

3

button

: This button plays the current track from

the beginning. Pressing this button twice plays the

previous track.

4

button

: This button fast-reverses the current

track. This button is not operable from 10 seconds

before the playback ends.

5

+/- button: Moves the cursor on the Internet radio

stations list in "My Favorites".

6

MENU

button

: This button displays the menu of each

Internet radio service.

7

RETURN

button

: This button returns to the previous

screen.

8

button

: This button plays the next track.

9

button

: This button fast-forwards the current

track. This button is not operable from 10 seconds

before the playback ends.

12

DISPLAY

REPEAT RANDOMSEARCH

CLR

MOVIE/

TV

MUSIC GAME

F

G

H

I

K

L

J

F

button

: This button starts the playback.

G

button

: This button pauses the playback.

H

SEARCH

button

: This button toggles between the

playback screen and list screen during playback.

I

button: This button stops the playback.

J

RANDOM

button

: This button performs random

playback.

K

REPEAT

button

: This button replays the track(or

tracks). Pressing this button repeatedly cycles

through the repeat modes.

L

DISPLAY

button

: This button changes the displayed

track information during playback. Pressing this

button when the list screen is displayed toggles the

screen to playback.

r

Bluetooth-enabled devices: Usable buttons are

,

, , , , , and .

Icons Displayed during Playback

Icons are displayed on the display during music file

playback. The meaning of each icon is as follows:

: Folder

: Track

: Play

: Pause

: Fast-forward

: Fast-reverse

: Artist

: Album

: Repeat One Track

: Repeat within a folder

: Repeat

: Shuffle

17

Using the Listening Modes

Selecting Listening Mode

The listening modes allow you to select the best sound

effect for your input source.

1.

Press RECEIVER on the remote controller.

 Always press RECEIVER first to change the remote

controller to RECEIVER mode (the mode to operate

this unit) since its mode may be changed to operate

another component.

2.

Press one of the following buttons depending on your

choice from among the four listening modes.

 Pressing a button changes the listening mode to that

chosen. Set the listening mode of your choice by

listening to the actual sound.

REPEAT RANDOM MODESEARCH

MOVIE/

TV

MUSIC

THX

GAME

For details on the types and difference of listening

modes, see "Contents of Listening Modes".



MOVIE/TV button

You can select a mode suitable for movies and TV

programs.

r

Selectable listening modes:

All Ch Stereo

Direct

Dolby Atmos

Dolby D (Dolby Digital)

Dolby D+ (Dolby Digital Plus)

Dolby Surround

Dolby TrueHD

DSD

DTS

DTS 96/24

DTS Express

DTS-HD HR (DTS-HD High Resolution Audio)

DTS-HD MSTR (DTS-HD Master Audio)

DTS Neo:X Cinema + THX Cinema

ES Discrete (DTS-ES Discrete)

ES Matrix (DTS-ES Matrix)

Full Mono

Mono

Multichannel

Neo:X Cinema

T-D (Theater-Dimensional)

THX Cinema

THX U2 Cinema (THX Ultra2 Cinema)

THX Surr EX (THX Surround EX)

TV Logic



MUSIC button

You can select a mode suitable for music.

r

Selectable listening modes:

All Ch Stereo

Direct

Dolby Atmos

Dolby D (Dolby Digital)

Dolby D+ (Dolby Digital Plus)

Dolby Surround

Dolby TrueHD

DSD

DTS

DTS 96/24

DTS Express

DTS-HD HR (DTS-HD High Resolution Audio)

DTS-HD MSTR (DTS-HD Master Audio)

DTS Neo:X Music + THX Music

ES Discrete (DTS-ES Discrete)

ES Matrix (DTS-ES Matrix)

Full Mono

Multichannel

Neo:X Music

Orchestra

Pure Audio

Stereo

Studio-Mix

THX Music

THX U2 Music (THX Ultra2 Music)

Unplugged



GAME button

You can select a mode suitable for games.

r

Selectable listening modes:

All Ch Stereo

Direct

Dolby Atmos

Dolby D (Dolby Digital)

Dolby D+ (Dolby Digital Plus)

Dolby Surround

Dolby TrueHD

DSD

DTS

DTS 96/24

DTS Express

DTS-HD HR (DTS-HD High Resolution Audio)

DTS-HD MSTR (DTS-HD Master Audio)

DTS Neo:X Game + THX Games

ES Discrete (DTS-ES Discrete)

ES Matrix (DTS-ES Matrix)

Full Mono

Neo:X Game

Game-Action

Game-Rock

Game-RPG

Game-Sports

Multichannel

T-D (Theater-Dimensional)

THX Games

THX U2 Games (THX Ultra2 Games)

Using the Listening Modes

18



THX button

You can select a THX listening mode.

r

Selectable listening modes:

DTS Neo:X Cinema + THX Cinema

DTS Neo:X Music + THX Music

DTS Neo:X Game + THX Games

THX Cinema

THX Music

THX Games

THX U2 Cinema (THX Ultra2 Cinema)

THX U2 Games (THX Ultra2 Games)

THX U2 Music (THX Ultra2 Music)

THX Surr EX (THX Surround EX)



PURE AUDIO button (main unit only)

The display and analog video circuit is cut off to switch

the unit to Pure Audio mode and provide purer sound.

Selecting this mode lights the PURE AUDIO indicator on

the unit. Pressing the button again reselects the previous

listening mode.

r

Selecting Pure Audio for listening mode turns off the

display and analog video circuitry, but the video signals

input through the HDMI input jack are output from the

HDMI output jack.



Pure Analog Playback (main unit only)

If you connect a CD player or such other player to the

analog audio input jacks of the unit with analog audio

(RCA) cable, you can use the "Pure Analog Playback

function" that physically shuts down the digital circuits

affecting sound reproduction and enables cleaner sound

playback. If this function is on, the power of the display,

analog video circuit, HDMI circuit, digital audio circuit, and

tuner circuit is cut off and their interference with sound

playback is physically prevented.

To use the function, hold down PURE AUDIO on the main

unit 5 seconds during playback. When "Pure Analog

[Enter]: OK" appears on the main unit display, press

ENTER on the main unit. To turn off the function, press

ON/STANDBY on the main unit.

r

When the function is on, you can perform only input

selection and volume adjustment. It cannot be operated

with Onkyo Remote or any other application that can

control the unit.

r

It cannot be used when "TUNER", "NET", "USB", or

"BLUETOOTH" input is selected or the multi-zone

function is on.

r

The Auto Standby setting becomes off if the function is

on.

Contents of Listening Modes

Selectable listening modes will differ depending on the

number of input source channels and the actual speaker

configuration. Listening modes available when headphones

are connected are: Pure Audio, Mono, Direct, and Stereo.

Lists in alphabetic order (A-Z)



All Ch Stereo

Ideal for background music, this mode fills the entire

listening area with stereo sound from the front, surround,

and surround back speakers.

r

Input source: MONO, STEREO, 5.1 ch, 7.1 ch



Direct

In this mode, audio from the input source is output as-is.



output will be stereo, or if Dolby Digital signal is input, the

sound field will be controlled in accordance with the number

of channels present.

r

Input source: MONO, STEREO, 5.1 ch, 7.1 ch



Dolby Atmos

Introduced first in the cinema, Dolby Atmos brings a

revolutionary sense of dimension and immersion to the

Home Theater experience. Dolby Atmos is an adaptable

and scalable object based format that reproduces

audio as independent sounds (or objects) that can be

accurately positioned and move dynamically throughout

the 3 dimensional listening space during playback. A key

ingredient of Dolby Atmos is the introduction of a height

plane of sound above the listener.

r

Surround back speakers, height speakers or wide

speakers need to be installed.

r

This listening mode can be selected only if the input

signal is Dolby Atmos.



Dolby D

This mode is for use with Dolby Digital sources. The audio

from the input source is output as-is, without surround

sound processing.

r

Input source: 5.1 ch

r

This listening mode can be selected only if your Blu-ray

Disc/DVD player is digitally connected to the unit or the

player's output setting is bitstream.



Dolby D+

This mode is for use with Dolby Digital Plus sources.

The audio from the input source is output as-is, without

surround sound processing.

r

Input source: 5.1 ch, 7.1 ch

r

This listening mode can be selected only if your Blu-ray

Disc/DVD player is digitally connected to the unit or the

player's output setting is bitstream.

r



Discs, Dolby Digital is automatically applied.

19

Using the Listening Modes



Dolby Surround

Dolby surround is a next generation surround technology

that intelligently up mixes stereo; 5.1 and 7.1 content for

playback through your surround speaker system. Dolby

surround is compatible with traditional speaker layouts,

as well as Dolby Atmos enabled playback systems that

employ in-ceiling speakers or products with Dolby speaker

technology.

r

Input source: STEREO, 5.1 ch, 7.1 ch



Dolby TrueHD

This mode is for use with Dolby TrueHD sources. The audio

from the input source is output as-is, without surround

sound processing.

r

Input source: 5.1 ch, 7.1 ch

r

This listening mode can be selected only if your Blu-ray

Disc/DVD player is digitally connected to the unit or the

player's output setting is bitstream.



DSD

This mode is for use with DSD sources. The audio from

the input source is output as-is, without surround sound

processing.

r

Input source: 5.1 ch

r

This unit supports DSD signals input through HDMI IN.

However, depending on the connected player, better

sound is possible when output from the PCM output of

the player. In that case, configure the player for PCM

output.

r

This listening mode can be selected only if your Blu-ray

Disc/DVD player's output setting is DSD.



DTS

This mode is for use with DTS sources. The audio from

the input source is output as-is, without surround sound

processing.

r

Input source: 5.1 ch

r

This listening mode can be selected only if your Blu-ray

Disc/DVD player is digitally connected to the unit or the

player's output setting is bitstream.



DTS 96/24

This mode is for use with DTS 96/24 sources. The audio

from the input source is output as-is, without surround



resolution, it provides superior fidelity.

r

Input source: 5.1 ch

r

Depending on the settings, this listening mode becomes

DTS.

r

This listening mode can be selected only if your Blu-ray

Disc/DVD player is digitally connected to the unit or the

player's output setting is bitstream.



DTS Express

This mode is for use with DTS Express sources. The audio

from the input source is output as-is, without surround

sound processing.

r

Input source: 5.1 ch

r

This listening mode can be selected only if your Blu-ray

Disc/DVD player is digitally connected to the unit or the

player's output setting is bitstream.



DTS-HD HR

This mode is for use with DTS-HD High Resolution Audio

sources. The audio from the input source is output as-is,

without surround sound processing.

r

Input source: 5.1 ch, 7.1 ch

r

This listening mode can be selected only if your Blu-ray

Disc/DVD player is digitally connected to the unit or the

player's output setting is bitstream.



DTS-HD MSTR

This mode is for use with DTS-HD Master Audio sources.

The audio from the input source is output as-is, without

surround sound processing.

r

Input source: 5.1 ch, 7.1 ch

r

This listening mode can be selected only if your Blu-ray

Disc/DVD player is digitally connected to the unit or the

player's output setting is bitstream.



DTS Neo:X

This mode expands various input sources for up to



and realistic broad surround sound by adding front high/

front wide speakers that create dome-shaped sound field.

r

DTS Neo:X listening mode cannot be selected for 192

kHz or Dolby TrueHD input signals.

– : Use this mode with any 2 ch movie.

r

Input source: STEREO, 5.1 ch, 7.1 ch

– : Use this mode with any 2 ch music

source.

r

Input source: STEREO, 5.1 ch, 7.1 ch

– Neo:X Game: Use this mode with any 2 ch video game

source.

r

Input source: STEREO, 5.1 ch, 7.1 ch



ES Discrete

This mode is for use with DTS-ES Discrete sources and



channel. Completely discrete seven channels will improve

spatial imaging and enable 360-degree sound localization

producing a sound crossing between the surround

channels.

r

Input source: 6.1 ch, 7.1 ch

r

Surround back speakers need to be installed.

r

This listening mode can be selected only if your Blu-ray

Disc/DVD player is digitally connected to the unit or the

player's output setting is bitstream.

r

Use on the DVD with DTS ES logo, particularly on the

software containing DTS-ES Matrix soundtrack.

r

Playback becomes DTS if no surround back speaker is

connected.



ES Matrix

This mode is for use with DTS-ES Matrix soundtrack and



back channel.

r

Input source: 6.1 ch, 7.1 ch

r

Surround back speakers need to be installed.

r

This listening mode can be selected only if your Blu-ray

Disc/DVD player is digitally connected to the unit or the

player's output setting is bitstream.

Using the Listening Modes

20

r

Use on the CD, DVD or LD with DTS ES logo,

particularly on the software containing DTS-ES Matrix

soundtrack.

r

Playback becomes DTS if no surround back speaker is

connected.



Full Mono

In this mode, all speakers output the same sound in mono,

so the sound you hear is the same regardless of where you

are within the listening room.

r

Input source: MONO, STEREO, 5.1 ch, 7.1 ch



Game-Action

In this mode, sound localization is distinct with emphasis on

bass.

r

Input source: MONO, STEREO, 5.1 ch, 7.1 ch

r

Surround speakers need to be installed.



Game-Rock

In this mode, sound pressure is emphasized to heighten

live feel.

r

Input source: MONO, STEREO, 5.1 ch, 7.1 ch

r

Surround speakers need to be installed.



Game-RPG

In this mode, the sound has a dramatic feel with a similar

atmosphere to Orchestra mode.

r

Input source: MONO, STEREO, 5.1 ch, 7.1 ch

r

Surround speakers need to be installed.



Game-Sports

Suitable for audio source with much reverberation.

r

Input source: MONO, STEREO, 5.1 ch, 7.1 ch

r

Surround speakers need to be installed.



Mono

Use this mode when watching an old movie with a mono

soundtrack, or use it to separately reproduce soundtracks

in two different languages recorded in the left and right

channels of some movies. It is also suitable for DVDs or

other sources containing multiplexed audio.

r

Input source: MONO, STEREO, 5.1 ch, 7.1 ch



Multichannel

This mode is for use with PCM multichannel sources.

The audio from the input source is output as-is, without

surround sound processing.

r

Input source: 5.1 ch, 7.1 ch



Orchestra

Suitable for classical or operatic music, This mode

emphasizes the surround channels in order to widen the

stereo image, and simulates the natural reverberation of a

large hall.

r

Input source: MONO, STEREO, 5.1 ch, 7.1 ch

r

Surround speakers need to be installed.



Pure Audio

This mode reproduces the original sound accurately. Since

the audio from the input source is output without surround

sound processing and the display and video circuitry are

turned off, possible noise sources are minimized for a

realistic audio reproduction.

r

Input source: MONO, STEREO, 5.1 ch, 7.1 ch

r





selected, automatically switches the listening mode to

Direct.



Stereo

In this mode, sound is output from the front left and right

speakers/subwoofer.

r

Input source: MONO, STEREO, 5.1 ch, 7.1 ch



Studio-Mix

Suitable for rock or pop music, Listening to music in this

mode creates a lively sound field with a powerful acoustic

image, like being at a club or rock concert.

r



r

Surround speakers need to be installed.



T- D

In this mode, you can enjoy a virtual playback of

multichannel surround sound even with only two or three

speakers. This works by controlling how sounds reach the

listener’s left and right ears.

r



r

Good results may not be possible if there is too much

reverb, so we recommend that you use this mode in an

environment with little or no natural reverb.



THX

Founded by George Lucas, THX develops stringent

standards that ensure movies are reproduced in

movie theaters and home theaters just as the director

intended. THX Modes carefully optimize the tonal and



in the home-theater environment. They can be used with

2-channel matrixed and multichannel sources. Surround

back speaker output depends on the source material and

the selected listening mode.

r

The THX mode can finely adjust the acoustic and

spatial characteristics of the soundtrack for the best



source and multichannel source. Surround back sound

will differ depending on the source and selected listening

mode.

– : The combination

mode of DTS Neo:X Cinema and THX Cinema mode

can be used. "Neo:X" and "THX" light on the unit’s

display.

r

Input source: STEREO, 5.1 ch, 7.1 ch

r

Surround back speaker need to be installed when

playing with speaker configuration of more than



– : The combination

mode of DTS Neo:X Music and THX Music mode can be

used. "Neo:X" and "THX" light on the unit’s display.

r

Input source: STEREO, 5.1 ch, 7.1 ch

r

Surround back speaker need to be installed when

playing with speaker configuration of more than



Page is loading ...

ONKYO PR-SC5530 Owner's manual

ONKYO PR-SC5530 Owner's manual

Related papers

Other documents