Alarm Lock SCHLAGE CYLINDER ASSEMBLY Adde User manual

SCHLAGE CYLINDER ASSEMBLY ADDENDUM

FOR REGAL CURVED LEVER (75) TRILOGY MODELS ONLY

KNURLED NUT

SPACER

P/N HW830

CYLINDER

(Not supplied with lock)

TAIL PIECE

P/N HW580

(Supplied with lock)

KNURLED NUT

(Not supplied with lock)

SPACER

P/N HW830

(Supplied with lock)

ASSEMBLY PROCEDURE:

1. REMOVE ORIGINAL TAIL PIECE: DEPRESS THE SPRING LOADED LOCKING PIN AND

UNSCREW THE KNURLED NUT.

2. PLACE SPACER (PROVIDED) ON CYLINDER, AS SHOWN.

3. PLACE TAIL PIECE IN VERTICAL POSITION (AS SHOWN).

4. ASSEMBLE THE KNURLED NUT: DEPRESS THE SPRING LOADED LOCKING PIN, THEN

SCREW BACK ON THE KNURLED NUT.

5. CHECK FOR PROPER CLEREANCE FOR ROTATION OF THE CYLINDER AND MAKE

SURE THAT THE SPRING LOADED PIN IS LOCKED WITH THE NUT.

WI1037A 03/01

TAIL PIECE

P/N HW580

SPRING LOADED LOCKING PIN

This manual is also suitable for