Bissell 1770, 1970, 2080, 2090 Series Owner's manual

Brand: Bissell

Model: 1770, 1970, 2080, 2090 Series

Category: Floor Machine

Type: Owner's manual

Bissell 1770, 1970, 2080, 2090 Series is a lightweight deep cleaner designed for various cleaning tasks. It features a spray trigger for precise cleaning, a large capacity solution tank, and a removable nozzle for easy cleaning. With its powerful suction, the device effectively removes dirt and stains from carpets and hard floors. The included Tough Stain Pre-Cleaner helps tackle stubborn stains, while the Quick Release Cord Wrap ensures convenient storage.

Safety Instructions

Product View

Assembly

Operation

Maintenance and Care

Troubleshooting

Consumer Services

Replacement Parts

5-7

Additional Accessories

Warranty

U S E R ’ S G U I D E

1770, 1970, 2080, 2090 SERIES

QuickSteamer

We’re glad you purchased a BISSELL QuickSteamer lightweight deep cleaner.

Everything we know about floor care went into the design and construction

of this complete, high-tech home cleaning system.

Your QuickSteamer is well made, and we back it with a limited one-year

warranty. We also stand behind it with a knowledgeable, dedicated

Consumer Services department, so, should you ever have a problem, you’ll

receive fast, considerate assistance.

My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is

a global leader in the design, manufacture, and service of high quality

homecare products like your QuickSteamer.

Thanks again, from all of us at BISSELL.

Mark J. Bissell

President and Chief Executive Officer

Thanks for buying a BISSELL QuickSteamer

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical

appliance, basic precau-

tions should be observed, including the following:

Read all instructions before using your QUICKSTEAMER

WARNING:

To reduce the risk

of fire, electric shock, or injury:

■

Do not immerse.

■

Use only on surfaces moistened by cleaning process.

■

Always connect to a properly grounded outlet.

See Grounding Instructions.

■

Unplug from outlet when not in use and before

conducting maintenance or troubleshooting.

■

Do not leave machine when it is plugged in.

■

Do not service machine when it is plugged in.

■

Do not use with damaged cord or plug.

■

If appliance is not working as it should, has been

dropped, damaged, left outdoors, or dropped into water,

have it repaired at an authorized Service Center.

■

Do not expose to rain. Store indoors.

■

Do not pull or carry by cord, use cord as a handle, close

door on cord, pull cord around sharp corners or edges, run

appliance over cord, or expose cord to heated surfaces.

■

Do not carry the appliance while in use.

■

Do not unplug by pulling on cord. Unplug by grasping

the plug, not the cord.

■

Do not handle plug or appliance with wet hands.

■

Do not put any object into appliance openings, use with

blocked opening, or restrict air flow.

■

Do not expose hair, loose clothing, fingers or body

parts to openings or moving parts.

■

Do not pick up hot or burning objects.

■

Do not pick up flammable or combustible materials

(lighter fluid, gasoline, kerosene, etc.) or use in the

presence of explosive liquids or vapor.

■

Do not use appliance in an enclosed space filled

with vapors given off by oil base paint, paint thin-

ner, some moth proofing substances, flammable

dust, or other explosive or toxic vapors.

■

Do not pick up toxic material (chlorine bleach, ammonia,

drain cleaner, gasoline, etc.).

■

Do not modify the 3-prong grounded plug.

■

Do not allow to be used as a toy.

■

Do not use for any purpose other than described in

this user’s guide.

■

Use only manufacturer’s recommended attachments.

■

Use only cleaning products formulated by

BISSELL for use in this appliance to prevent

internal component damage. See the Cleaning

Fluid section of this guide.

■

Keep openings free of dust, lint, hair, etc.

■

Keep appliance on a level surface.

■

Turn off all controls before unplugging.

■

Be extra careful when cleaning stairs.

■

Close attention is necessary when used by

or near children.

SAVE THESE

INSTRUCTIONS.

THIS MODEL IS FOR HOUSEHOLD USE ONLY.

Commercial use of this unit voids the

manufacturer’s warranty.

GROUNDING

INSTRUCTIONS

This appliance must be connected to a grounded

wiring system. If it should malfunction or break

down, grounding provides a safe path of least

resistance for electrical current, reducing the risk of

electrical shock. The cord for this appliance has an

equipment-grounding conductor and a grounding

plug. It must only be plugged into an outlet that is

properly installed and grounded in accordance with

all local codes and ordinances.

WARNING: Improper

connection of the equipment-grounding

conductor can result in a risk of electrical

shock. Check with a qualified electrician or

service person if you aren’t sure if the

outlet is properly grounded. DO NOT MODIFY

THE PLUG. If it will not fit the outlet, have

a proper outlet installed by a qualified

electrician. This appliance is designed for

use on a nominal 120-volt circuit, and has

a grounding attachment plug that looks

like the plug in the drawing above. Make

certain that the appliance is connected to

an outlet having the same configuration as

the plug. No plug adapter should be used

with this appliance.

Grounded

Outlets

Grounding Pin

Cleaning fluid

Keep plenty of genuine BISSELL 2X Fiber Cleansing Formula

™

on hand so you can clean and protect

whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas. Non-BISSELL

cleaning solutions may harm the machine and will void the warranty.

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Spray Trigger

Solution Tank

Large Easy

Rolling Wheels

Power Switch

Detent

Lever

Quick Release

Cord Wrap™

Power

Cord

Lower

Cord Wrap

Handle

Assembly

Upper Body

Lower

Body

Vent Cover

(Containing

Foam Filter)

Collection

Tank

Collection

Tank

Latch

Removable

Nozzle

Product View

BISSELL

2X Fiber

Cleansing

Formula

™

with

Scotchgard

Protection

BISSELL

2X Multi-Allergen

Removal

™

Formula with

Scotchgard

™

Protection

BISSELL

2X Pet Stain and

Odor Removal

™

Formula with

Scotchgard

™

Protection

BISSELL

2X Natural

Orange Extract

Formula with

Scotchgard

™

Protection

BISSELL

2X Hard

Floor

Solutions

™

Formula

BISSELL

Tough Stain

PreCleaner

™

BISSELL

2X Lavendar

Essence Formula

with Scotchgard

™

Protection

BISSELL

2X Professional

Deep Cleaning

Formula with

Scotchgard

™

Protection

WARNING:

To reduce the risk of fire and electric shock due to internal

component damage, use only BISSELL cleaning fluids intended

for use with the deep cleaner. Non-BISSELL cleaning solutions

may harm the machine and void the warranty.

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

1. Slide upper body into lower body.

2. Secure with screws.

3. Slide handle assembly down into upper body

until it will go no further. Align screw slots.

4. Secure with screw.

5. Place solution tank on back of unit.

Before you clean

1. Remove easily moved furniture (chairs, lamps,

coffee/cocktail tables, etc.) from room if needed.

2. Vacuum carpet thoroughly.

3. Decide where to begin. Plan to leave a path open

to empty soiled water and refill cleaner.

Note: Carpeting will dry in three to four

hours, depending on carpet style and

air circulation in room. A floor fan

speeds drying

Fill the tank

1. Remove the solution tank by lifting it straight up,

then away from the lower body.

2. Unscrew the black cap at the bottom of the

solution tank.

3. Fill to the FORMULA line with BISSELL 2X Fiber

Cleansing formula. Fill the rest of the tank with

hot (not boiling) tap water to the water fill line.

Replace and tighten the black cap.

4. Place solution tank on lower body.

5. Rotate Quick Release Cord Wrap™ to release the

power cord and plug into an outlet.

Pre-Treating

Pre-treat stubborn stains and highly soiled

carpet in hallways and other high-traffic areas.

1. Generously spray BISSELL Tough Stain pre-cleaner

evenly over soiled area. DO NOT OVERWET CARPET

2. Wait 3-5 minutes before deep cleaning.

Assembly

Operation

Tip:

Always vacuum

thoroughly before

you deep clean.

If possible, move

large furniture to an

area you will not be

cleaning.

WARNING:

To reduce the risk of fire, use only

BISSELL advanced cleaning formulas

for deep cleaning machines. Use

of cleaning formulas that contain

lemon or pine oil may damage

this appliance and void warranty.

Chemical spot cleaners or solvent-

based soil removers should not be

used. These products may react

with the plastic materials used in

your QuickSteamer, causing

cracking or pitting.

Tip:

Deep cleaning spots,

spills and high traffic

areas on a regular

basis can prolong

carpet life.

Operation

Carpet cleaning

1. With your foot, press the red power switch

[located in foot of unit] ON .

2. With foot, press the detent lever on left side of

lower body.

3. Depress spray trigger to spray cleaning solution.

Do not overwet.

4. To suction up water, repeat motion over same

area without pressing trigger.

5. Repeat steps 3 and 4 until no more dirt can be removed.

6. Continue to clean entire carpet, working in

3’ x 4’ sections.

7. Empty the collection tank when dirty water reaches

the full line, or when the solution tank is empty.

8. If floor nozzle stops spraying, turn power switch

OFF and check water and cleaning solution levels.

Refill if needed.

To empty the collection tank

1. Turn power switch OFF and unplug power cord

from outlet.

2. Remove and empty collection tank.

a. Release collection tank latches [1 each side] by

pulling up from bottom of latch and then out.

b. Carefully remove collection tank from

lower body by lifting handle.

c. Carry collection tank to a toilet or sink. To

empty, pour out contents using opening at

back of tank.

d. Rinse collection tank thoroughly.

e. Remove lint and hair from red gasket in

base of unit. (Do not remove gasket)

3. Clean nozzle window by lifting latch and removing

from machine. Rinse under running water. When

finished replace nozzle and secure with latch.

4. Replace collection tank on lower body and secure

with latches.

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Tip:

It is recommended

that every time your

solution tank needs

refilling, that you empty

the contents of the

collection tank. If the

collection tank gets too

full, you may begin to

see foam spitting out

of the vent cover. If this

happens empty the

collection tank.

2a.

2c.

2b.

2e.

Hard floor cleaning

(included on select models only)

1. Remove the collection tank (refer to steps 2a and

b in the "To empty the collection tank" section on

page 6)

A. For 1770/1970 series it is necessary to

remove the cross action brush first.

Using your thumbs squeeze the 2 grey tabs

towards the outside of the unit. Push down

at the same time and release

the cross action brush.

2. Attach the hard floor tool by hooking it into the

front of the removable nozzle and swinging it

down until the tabs pop into place.

3. Replace the collection tank. Be sure to attach the

two latches.

4. Fill solution tank with BISSELL 2X Hard Floor

Solutions™ to FORMULA fill line. Fill the rest of

the tank with hot (not boiling) tap water to the

WATER fill line. Replace and tighten the black cap.

5. Follow steps 1-8 in "Carpet Cleaning" section

above.

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

1770/1970 series

2080/2090 series

Operation

WARNING:

To reduce the risk of fire and electric

shock- when cleaning a hard floor,

the BISSELL hard floor tool 203-5637

(models 1770 & 1970) / 203-5639

(models 2080 & 2090) must be

used and it must only be used with

BISSELL Hard Floor Solutions or

BISSELL 2X Hard Floor Solutions

cleaning fluid intended for use with

this appliance.

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Maintenance and care

CAUTION:

Do not store unit

where freezing may

occur. Damage to

internal components

may result.

WARNING:

To reduce the risk of injury

from moving parts and/or

electrical shock, turn power

switch OFF and disconnect

plug from electrical outlet

before performing maintenance

or troubleshooting checks.

Machine storage

1. Wrap power cord around Quick Release Cord

Wrap

™

on side of QuickSteamer

2. Wipe all surfaces with a soft cloth. Store cleaner

upright in a protected, dry area.

NOTE: You may have cleaning solution

remaining in the clean/solution tank. You may

store your QuickSteamer this way for the next

cleaning task, but never keep soiled solution in

the collection tank.

To install the replacement brush belt

*QuickSteamer PowerBrush models only

1. Turn the machine off and unplug from wall outlet.

2. Remove solution and collection tanks.

3. Lie machine down to access the bottom of

the machine.

4. With a Phillips head screwdriver, unscrew the

brush cover and remove.

5. Remove the brush end cap and remove belt from brush.

6. Brush can now be removed.

7. Belt can be removed by sliding off the motor pulley.

8. Clean or replace belt. Attach belt to motor pulley

and brush, insert brush into right side end cap.

9. Reattach the left end cap and slide brush back

into place.

10. Replace the brush cover and screw into place.

5. 5a.

6. 7.

8. 9.

Brush Cover

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Troubleshooting

Reduced spray or no spray

Possible Cause Remedy

1. Clean tank empty 1. Refill tank with water

and formula

2. Lint screen on solution tank cap clogged 2. Soak solution tank cap in warm

water and then rinse under

running water

Deep cleaner not picking up cleaning solution

Possible Cause Remedy

1. Collection tank not aligned/secured 1. Check tank proper alignment

and secure with side latches

2. Dirty tank full 2. Empty tank

3. Removable nozzle installed improperly 3. Align four "hooks" into bottom

first, then snap into place on top

4. Removable nozzle full of debris 4. Remove nozzle and rinse under

running water

5. Red lint screen under collection tank clogged 5. Remove debris from lint screen

Other Maintenance or Service not included above should be performed by

an authorized service representative.

Thank you for selecting a BISSELL product.

Please do not return this product to the store

For any questions or concerns, BISSELL is happy to be of service.

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

For information about repairs or replacement parts, or questions about your warranty, call:

BISSELL Consumer Services

1-800-237-7691

Monday - Friday 8 a.m. — 10 p.m. ET

Saturday 9 a.m. — 8 p.m. ET

Or write:

BISSELL HOMECARE, INC

PO Box 3606

Grand Rapids MI 49501

ATTN: Consumer Services

Or visit the BISSELL website - www.bissell.com

When contacting BISSELL, have model number of unit available.

Please record your Model Number: ___________________

Please record your Purchase Date: ___________________

NOTE: Please keep your original sales receipt. It provides proof of date of purchase in the event

of a warranty claim. See "Warranty" on page 12 for details.

BISSELL Consumer Services

Please register your new BISSELL product at

www.bissell.com/productregistration

Replacement parts - BISSELL QuickSteamer

Additional Accessories

Item Part No. Part Name

QuickSteamer – 1770/1970 Series

1 203-5519 Handle Assembly

2 203-5545 Cross Action Brush

3 203-5537 Solution Tank (Includes Cap and Insert Assembly)

4 203-5522 Collection Tank

5 203-5637 Hard Floor Tool, provided with trial size Hard Floor Solutions

™

formula

6 203-5541 Solution Tank Cap and Insert Assembly

QuickSteamer PowerBrush – 2080/2090 Series

1 203-5520 Handle Assembly

3 203-5540 Solution Tank (Includes Cap and Insert Assembly)

4 203-5523 Collection Tank

6 203-5541 Solution Tank Cap and Insert Assembly

7 203-5546 DirtLifter

PowerBrush

8 203-5549 Belt

9 203-5639 Hard Floor Tool, provided with trial size Hard Floor Solutions

™

formula

Item Part No. Part Name

10 62E5 2X Fiber Cleansing Formula

™

with Scotchgard

™

Protection 24 oz.

11 99K5 2X Pet Stain and Odor Removal

™

Formula with Scotchgard

™

Protection 24 oz.

12 89Q4 2X Multi-Allergen Removal

™

Formula with Scotchgard

™

Protection 24 oz.

13 83P3 2X Natural Orange Extract Formula with Scotchgard

™

Protection 24 oz.

14 34B5 2X Lavendar Essence Formula with Scotchgard

™

Protection 24 oz.

15 78H6 2X Professional Deep Cleaning Formula with Scotchgard

™

24 oz.

16 81T7 2X Hard Floor Solutions

™

Formula 16 oz.

17 4001 Tough Stain PreCleaner

™

22 oz.

1 2 3 4 5 6 8

10 12 14 15 16 17

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Earn Rewards Points!

To qualify you for discounts, rebates, and other BISSELL perks.

Visit www.bissell.com/rewards to learn more.

Warranty - BISSELL QuickSteamer

This warranty gives you specific legal rights, and you may also have other rights which may vary from state

to state. If you need additional instruction regarding this warranty or have questions regarding what it may

cover, please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below.

Limited One Year Warranty

Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL

Homecare, Inc. will repair or replace (with new or remanufactured components or products), at BISSELL’s

option, free of charge from the date of purchase by the original purchaser, for one year any defective or

malfunctioning part.

See information below on "If your BISSELL product should require service".

This warranty applies to product used for personal, and not commercial or rental service. This warranty does not

apply to fans or routine maintenance components such as filters, belts, or brushes. Damage or malfunction caused

by negligence, abuse, neglect, unauthorized repair, or any other use not in accordance with the User's Guide is not

covered.

If your BISSELL product should require service:

Contact BISSELL Consumer Services to locate a BISSELL Authorized Service Center in your area.

If you need information about repairs or replacement parts, or if you have questions about your war-

ranty, contact BISSELL Consumer Services.

Website or E-mail:

www.bissell.com

Use the “Customer Services” tab.

Or Call:

BISSELL Consumer Services

1-800-237-7691

Monday - Friday 8 a.m. - 10 p.m. ET

Saturday 9 a.m. - 8 p.m. ET

Or write:

BISSELL Homecare, Inc.

PO Box 3606

Grand Rapids MI 49501

ATTN: Consumer Services

BISSELL HOMECARE, INC. IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE

ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELL’S LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF

THE PRODUCT.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above

limitation or exclusion may not apply to you.

*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY

THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER

ORAL OR WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION

OF LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE ONE YEAR DURATION

FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE.

Some states do not allow limitations on how long an implied warranty lasts,

so the above limitation may not apply to you.

NOTE: Please keep your original sales receipt,

it is your warranty.

Grand Rapids, Michigan

Part Number 120-4109

Rev 06/09

Visit our website at:

www.bissell.com

Scotchgard is a trademark of 3M

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1

Bissell 1770, 1970, 2080, 2090 Series Owner's manual

Brand: Bissell

Model: 1770, 1970, 2080, 2090 Series

Category: Floor Machine

Type: Owner's manual

Download PDF

report

Bissell 1770, 1970, 2080, 2090 Series Owner's manual

Bissell 1770, 1970, 2080, 2090 Series Owner's manual

Related papers

Other documents