USING NAVIGATION
Go to Address
*CONTACTS HELP
POINTS OF INTEREST (POI) SEARCH
1. Push the BLUELINK
button and when
prompted say,
“NEW DESTINATION”
2. Say the name of the POI, category or
street address. Example: say the name
“H Y U N D A I”
3. Up to ve nearby choices can be
provided if the rst match is not desired.
Say “NEXT” to hear multiple matches or
proceed to Step 4.
4. Say “DOWNLOAD”
if it is the POI you requested or say
“TRY AGAIN” if unable to nd your POI
5. Navigation system instructions will
display on screen to proceed further
with route guidance.
After pairing is completed, transfer of the
contact list to the audio system will begin
(if your phone is supported). The downloaded
contact list may start with either rst or last
name depending on the phone make and model
Some phones may request approval to
download contact list* to the audio system
(If approval is not granted, the phone may
frequently disconnect or not download
contact list)
This process may take a few minutes
depending on the phone make, model and
number of entries in the contact list
If your phone prompts permission for the
vehicle’s audio system to access your contacts
and call history, ensure the check box is marked
to “Always allow” or “Don’t ask again.” This
will allow the phone to automatically connect
to your vehicle and Voice Recognition will have
access to your contacts list
EXAMPLE
EQUUS_15TH_DRAFT.indd 11-12 11/26/13 2:13 PM