Casio FR-2650RC Owner's manual

E S F G I Sw D Nr Fi De Po R Hg Cz Pl

D-20TER/DF-120TER/JF-120TER/

MS-88TER/MS-100TER/MS-120TER/

SL-310TER/SL-320TER

User’s Guide

Guía del usuario

Mode d’emploi

Bedienungsanleitung

Guida dell’utilizzatore

Instruktionshäfte

Gebruiksaanwijzing

Bruksanvisning

Käyttäjän opas

Brugsvejledning

Manual de Instruções

Felhasználói Útmutató

Návod k použití

Instrukcja Obsługi

CASIO COMPUTER CO., LTD.

6-2, Hon-machi 1-chome

Shibuya-ku, Tokyo 151-8543, Japan

SA0507-A Printed in China/Imprimé en Chine

GY930_Cover_Print.p65 05.7.11, 1:55 PM1

CASIO Europe GmbH

Bornbarch 10, 22848 Norderstedt, Germany

English ............................................................................................ 1

Español ......................................................................................... 10

Français ....................................................................................... 19

Deutsch ......................................................................................... 28

Italiano ......................................................................................... 37

Svenska ....................................................................................... 46

Nederlands .................................................................................. 55

Norsk............................................................................................ 64

Suomi ........................................................................................... 73

Dansk ........................................................................................... 82

Português ..................................................................................... 91

Русский ...................................................................................... 100

Magyar ........................................................................................ 110

Česky .......................................................................................... 119

Polski.......................................................................................... 128

GY930_Cover_Print.p65 05.7.11, 1:55 PM2

–

1

–

English

Contents

1/ General Guide .......................................................................................................... 2

2/ Correcting Input Errors........................................................................................... 3

3/ Power Supply........................................................................................................... 4

4/ Important Precautions ............................................................................................ 5

5/ Specifications .......................................................................................................... 6

6/ Euro Currency Conversion ..................................................................................... 7

7/ Tax Calculations ...................................................................................................... 9

8/ Example Calculations ......................................................................................... 137

9/ Currency Conversion Examples ........................................................................ 165

10/ Tax Calculation Examples (Tax Rate = 5%) ..................................................... 181

IMPORTANT!

• Please keep your manual and all information handy for future reference.

• The switches and keys available on your calculator depend on its model number. Be sure to

check the calculator itself to see if explanations in this User’s Guide apply to your calculator

model.

01GY930_EU15_E_0708.p65 05.7.11, 2:10 PM1

–

2

–

1

/

General Guide

kAbout the Selectors

Rounding Selector (D-20TER/DF-120TER/JF-120TER)

Specifies the rounding system.

F: Floating decimal point system, which displays the value without rounding.

CUT: Cuts off the decimal to the specified* number of places.

5/4: Rounds off the decimal to the specified* number of places.

* Use the Decimal Place Selector to specify the number of decimal places.

Decimal Place Selector (D-20TER/DF-120TER/JF-120TER)

Specifies the number of decimal places for rounding. Note that the Decimal Place Selector is

valid whenever the Rounding Selector is in any position other than F.

4, 3, 2, 1, 0: Number of decimal places for the CUT and 5/4 settings of the Rounding

Selector.

ADD

2

: The ‘‘Add Mode’’ automatically adds a decimal point and two decimal places to all

values, even if you don’t input a decimal point. This mode is very useful when

performing calculations in dollars or other monetary systems that require two decimal

places. Two decimal places are not added in this mode if you press the . key while

inputting a value, or for any operation other than addition and subtraction.

01GY930_EU15_E_0708.p65 05.7.11, 2:10 PM2

–

3

–

kAbout the Display

⬘

: 3-digit separator (apostrophe) Euro : Euro currency indicator

ⴑ : Negative value indicator Local : Local currency indicator

GT : Grand total memory indicator RATE : Conversion rate indicator

(D-20TER/DF-120TER/JF-120TER) TAX : Tax amount indicator

M:Independent memory indicator TAX+ : Price-plus-tax indicator

E:Error indicator TAX– : Price-less-tax indicator

K:Constant calculation indicator ⴐⴑⴒⴓ : Arithmetic operation indicators

2

/ Correcting Input Errors

•To completely clear a value you have just input, press C.

•To shift a displayed value digit-by-digit to the right, press + until you get to the digit you

want to re-input from. (MS-88TER)

• If you press the wrong arithmetic operation key (+, -, *, /), simply press the correct

key before inputting anything else.

kClearing Calculations

•To clear the calculator except for the independent memory, press A.

•To clear the independent memory only, press U twice.

01GY930_EU15_E_0708.p65 05.7.11, 2:10 PM3

–

4

–

kError Indicator

If the error indicator “E

” appears on the display, press C to clear the error and continue with

the calculation, or A to clear the entire calculation.

3

/ Power Supply

The Two-Way Power System of this calculator uses a solar cell, in addition to one LR44 or

LR54 (LR1130) button type battery. Unlike calculators equipped with a solar cell only, you can

use this calculator under virtually any lighting conditions, as long as there is enough light for

you to read the display.

kBattery Replacement

Do not try to replace the battery yourself. Have it replaced by an authorized CASIO dealer

or service center.

If the display becomes dim and difficult to read, or if nothing appears on the display when you

press A (especially when lighting is dim), you probably need to have the battery replaced.

•A dead battery can leak and damage the calculator if left in the battery compartment for

long periods.

01GY930_EU15_E_0708.p65 05.7.11, 2:10 PM4

–

5

–

• The battery that comes with this unit discharges slightly during shipment and storage.

Because of this, it may require replacement sooner than the normal expected battery life.

kAuto Power Off Function

This calculator is not equipped with an OFF switch. Instead, it switches power off automati-

cally about six minutes after the last key operation is performed. To restore power, press A.

• When you press A, the independent memory contents are not cleared.

4

/ Important Precautions

•Avoid dropping the calculator and otherwise subjecting it to severe impact.

• Never try to take the calculator apart.

• Wipe the unit with a soft, dry cloth to clean it.

• The contents of these instructions are subject to change without notice.

• CASIO COMPUTER CO., LTD. assumes no responsibility for any loss or claims by third

parties which may arise from the use of this product.

01GY930_EU15_E_0708.p65 05.7.11, 2:10 PM5

–

6

–

5

/ Specifications

Power Supply:

D-20TER/DF-120TER/JF-120TER:

Two-Way Power System, with solar cell and one button type battery (LR44)

MS-88TER/MS-100TER/MS-120TER/SL-310TER/SL-320TER:

Two-Way Power System, with solar cell and one button type battery (LR54 (LR1130))

Battery Life: Approximately 3 years (1 hour operation per day)

Operating Temperature: 0°C to 40°C (32°F to 104°F)

Dimensions:

D-20TER: 32 (H) × 151 (W) × 158 (D) mm (1

1

/4"H × 5

15

/16"W × 6

1

/4"D)

DF-120TER: 36 (H) × 126 (W) × 175 (D) mm (1

7

/16"H × 4

15

/16"W × 6

7

/8"D)

JF-120TER: 29.3 (H) × 107 (W) × 175.5 (D) mm (1

1

/8"H × 4

3

/16"W × 6

15

/16"D)

MS-88TER/MS-100TER/MS-120TER:

30.7 (H) × 103 (W) × 145 (D) mm (1

3

/16"H × 4

1

/16"W × 5

11

/16"D)

SL-310TER/SL-320TER:

7.5 (H) × 70 (W) × 118.5 (D) mm (

5

/16"H × 2

3

/4"W × 4

11

/16"D)

01GY930_EU15_E_0708.p65 05.7.11, 2:10 PM6

–

7

–

Weight:

D-20TER/DF-120TER:

Approximately 195 g (6.9 oz) (including the battery)

JF-120TER: Approximately 165 g (5.8 oz) (including the battery)

MS-88TER/MS-100TER/MS-120TER:

Approximately 120 g (4.2 oz) (including the battery)

SL-310TER/SL-320TER:

Approximately 55 g (1.9 oz) (including the battery)

6

/

Euro Currency Conversion

• Pressing A to clear the calculation memory does not clear the conversion rate setting.

kSetting a Conversion Rate

Example: To set the conversion rate for your local currency as 1 euro = 1.95583 DM

(Deutsche marks).

1. Press A.

2. Hold down e for about two seconds and the currently set rate appears on the display.

0.

01GY930_EU15_E_0708.p65 05.7.11, 2:10 PM7

–

8

–

3. Input the conversion rate (1.95583) and then press e to

store it in memory.*

* For rates of 1 or greater, you can input up to six digits. For rates less than 1 you can input

up to 8, 10 or 12 digits, including 0 for the integer digit and leading zeros (though only six

significant digits, counted from the left and starting with the first non-zero digit, can be

specified).

Examples: 0.123456, 0.0123456, 0.0012345 (MS-88TER)

•You can check the currently set rate at any time by pressing A and then E.

• The rate is retained in memory even when calculator power is turned off by operation of

Auto Power Off.

1.95583

RATEEuro

01GY930_EU15_E_0708.p65 05.7.11, 2:10 PM8

–

9

–

7

/

Tax Calculations

• Pressing A to clear the calculation memory does not clear independent memory or the tax

rate setting.

kSetting a Tax Rate

Example: Tax rate = 5%

(about two seconds)

Current rate setting

(You can input a value up to 6 digits long.)

(Stores rate and completes operation.)

•You can check the currently set rate at any time by pressing A and then t.

• The rate is retained in memory even when calculator power is turned off by operation of

Auto Power Off.

0.

%

TAX

A

%

5.

%

TAX

5

5.

%

TAX

%

5.

%

TAX

At

01GY930_EU15_E_0708.p65 05.7.11, 2:10 PM9

–

137

–

8

/ Example Calculations

8

/ Cálculos de ejemplo

8

/ Exemples de calculs

8

/ Rechenbeispiele

8

/ Esempi di calcoli

8

/ Räkneexempel

8

/ Rekenvoorbeelden

8

/ Utregningseksempler

8

/ Laskuesimerkkejä

8

/ Eksempel på udregninger

8

/ Cálculos de Exemplo

8

/ Примеры вычислений

8

/ Számítási példák

8

/ Příklady výpočtů

01_GY930_EU15_Ex_0709.p65 05.7.11, 1:56 PM137

–

138

–

8

/ Przykłady obliczeń

kBasic Calculations k Cálculos básicos

kCalculs élémentaires k Grundlegende Berechnungen

kCalcoli fondamentali k Grundläggande beräkningar

kBasisberekeningen k Grunnleggende beregninger

kPeruslaskutoimenpiteet k Grundlæggende udregninger

kCálculos básicos k Основные вычисления

kAlapszámítások k Základní výpočty

kObliczenia podstawowe

01_GY930_EU15_Ex_0709.p65 05.7.11, 1:56 PM138

–

139

–

“F

*

1

” A 0.

6 ÷ 3 × 5 + 2.4 – 1 = 11.4 6/3*5+2.4-1=

GT

*

2

11.4

2 × (– 3) = – 6 2*3>=

GT

–6.

(MS-88TER/MS-100TER/MS-120TER/

SL-310TER/SL-320TER)

Example / Ejemplo /

Exemple / Beispiel /

Esempio / Exempel /

Voorbeeld / Eksempel /

Esimerkki / Eksempel /

Exemplo / /

Példa

/

Příklad

/

Przykład

Key Operation / Operación de tecla /

Touche d’opération / Tastenbetätigung /

Operazione di tasto / Tangentoperation /

Toetsbewerking / Tastoperasjon /

Näppäintoimenpide / Tastindtryk /

Operação de tecla / /

Műveletsor

/

Klávesové operace

/

Klawisz operacji

Display / Presentación /

Affichage / Display /

Visualizzazione /

På skärmen / Display /

Display / Näyttö /

Display / Apresentação /

/

Kijelző

/

Displej

/

Wyświetlacz

01_GY930_EU15_Ex_0709.p65 05.7.11, 1:56 PM139

–

140

–

*

1

F, CUT, 5/4 (D-20TER/DF-120TER/JF-120TER): Indicates position of Rounding Selector. /

Indica la posición del selector de redondeo. / Indique la position du sélecteur d’arrondi. /

Zeigt die Position des Rundungswahlschalters an. / Indica la posizione del selettore di

arrotondamento. / Anger position för avrundningsväljaren. / Geeft de instelling aan van de

afrondkeuzeschakelaar. / Indikerer avrundingsvelgerens innstilling. / Ilmoittaa

pyöristysvalitsimen asennon. / Viser afrundingsvælgerens position. / Indica a posição do

selector de arredondamento. / Показывает положение переключателя режима

округления. / A kerekítés kiválasztó pozícióját mutatja. / Indikují polohu voliče

zaokrouhlování. / Wskazują pozycję selektora zaokrąglenia.

*

2

This indicator appears when you press = to indicate that the value is stored in grand total

memory (D-20TER/DF-120TER/JF-120TER). This indicator is not shown in some of the

example displays of this User’s Guide.

*

2

Este indicador aparece cuando presiona = para indicar que el valor se almacena en la

memoria de total general (D-20TER/DF-120TER/JF-120TER). Este indicador no se

muestra en algunas de las presentaciones de ejemplo de esta guía del usuario.

*

2

Cet indicateur apparaît lorsque vous appuyez sur = pour signaler que la valeur est

stockée dans la mémoire de total général (D-20TER/DF-120TER/JF-120TER). Cet

indicateur n’apparaît pas dans certains exemples d’affichage du mode d’emploi.

01_GY930_EU15_Ex_0709.p65 05.7.11, 1:56 PM140

–

141

–

*

2

Diese Anzeige erscheint, wenn Sie die =-Taste drücken, um damit anzuzeigen, dass

ein Wert in dem Gesamtsummenspeicher abgespeichert ist (D-20TER/DF-120TER/JF-

120TER

). Diese Anzeige ist in manchen in dieser Bedienungsanleitung aufgeführten

Beispielen nicht dargestellt.

*

2

Questo indicatore appare quando si preme =, per indicare che il valore è

immagazzinato nella memoria del totale generale (D-20TER/DF-120TER/JF-120TER).

Questo indicatore non è mostrato in alcune delle schermate di esempio della presente

Guida dell’utilizzatore.

*

2

Denna indikator visas vid ett tryck på = för att ange att värdet lagras i slutsvarsminnet

(DF-320TM). Indikatorn visas inte i vissa bildexempel i detta instruktionshäfte.

*

2

Deze indicator verschijnt wanneer u op = drukt om aan te geven dat de waarde in het

eindtotaalgeheugen opgeslagen is (D-20TER/DF-120TER/JF-120TER). Deze indicator

wordt niet getoond in sommige van de voorbeelddisplays in deze gebruiksaanwijzing.

*

2

Denne indikatoren vises når du trykker = for å indikere at tallet har blitt lagret i minnet

for sluttsum (

D-20TER/DF-120TER/JF-120TER). Denne indikatoren er utelatt i visse av

denne bruksanvisningens skjermeksempler.

*

2

Tämä ilmaisin tulee näkyviin kun painat = ilmoituksena siitä, että arvo on tallennettu

loppusummamuistiin (D-20TER/DF-120TER/JF-120TER). Tämä ilmaisin ei näy joissakin

tämän Käyttäjän oppaan esimerkkinäytöissä.

01_GY930_EU15_Ex_0709.p65 05.7.11, 1:56 PM141

–

142

–

*

2

Denne indikator begynder at lyse, når der trykkes på = for at angive, at værdien er

gemt i slutsum-hukommelsen (D-20TER/DF-120TER/JF-120TER). Denne indikator vises

ikke i nogle display-eksempler i denne brugsvejledning.

*

2

Este indicador aparece quando preme = para indicar que o valor está armazenado na

memória do total geral

(D-20TER/DF-120TER/JF-120TER). Este indicador não aparece

em algumas das apresentações de exemplo deste manual de instruções.

*

2

Этот индикатор появляется на дисплее при нажатии на клавишу = и

указывает на то, что значение сохранено в памяти итоговой суммы (D-20TER, DF-

120TER

, JF-120TER). В некоторых примерах индикации на дисплее, приведенных в

настоящей инструкции по эксплуатации, этот индикатор не показан.

*

2

Ez a jelző megjelenik, amikor megnyomja a = gombot jelezve, hogy az érték a

végösszeg memóriában van tárolva (D-20TER/DF-120TER/JF-120TER). Ez a jelző nincs

feltüntetve némely példakijelzésnél ebben a Felhasználói útmutatóban.

*

2

Tato indikace se objeví, když stisknete =, abyste dali příkaz k uložení hodnoty do

paměti celkové sumy (D-20TER/DF-120TER/JF-120TER). Tato indikace není ukázána u

některých příkladů v tomto návodu k obsluze.

*

2

Ten wskaźnik ukazuje się, kiedy naciśniesz =, aby wskazać, że wartość została

wprowadzona do pamięci sumy ogólnej

(D-20TER/DF-120TER/JF-120TER). Ten wskaźnik

nie jest przedstawiony w niektórych przykładach wyświetlaczy tej Instrukcji Obsługi.

01_GY930_EU15_Ex_0709.p65 05.7.11, 1:56 PM142

–

143

–

kRounding k Redondeo k Arrondi

kRundung k Arrotondamento k Avrundning

kAfronden k Avrunding k Pyöristäminen

kAfrunding k Arredondamento k Округление

kKerekítés k Zaokrouhlování k Zaokrąglenie

(D-20TER/DF-120TER/JF-120TER)

5 ÷ 3 = 1.66666666… “F” 5/3= 1.66666666666

“CUT, 2

*3

” 5/3= 1.66

“5/4, 2” 5/3= 1.67

*

3

4, 3, 2, 1, 0, ADD2: Indicates position of Decimal Place Selector. / Indica la posición del

selector de lugar decimal. / Indique la position du sélecteur de décimales. / Zeigt die

Position des Dezimalstellen-Wahlschalters an. / Indica la posizione del selettore di cifre

decimali. / Anger position för decimalväljaren. / Geeft de instelling aan van de decimale

plaatskeuzeschakelaar. / Indikerer desimalantallsvelgerens innstilling. / Ilmoittaa

kymmenyslukuvalitsimen asennon. / Viser decimalpladsvælgerens position. / Indica a

posição do selector de casas decimais. / Показывает положение переключателя числа

цифр после запятой. / A tizedesjegy helyiérték kiválasztó pozícióját mutatja. / Indikují

polohu voliče desetinných míst. / Wskazują pozycję selektora miejsca dziesiętnego.

01_GY930_EU15_Ex_0709.p65 05.7.11, 1:56 PM143

–

144

–

kAdd Mode k Modo Add k Mode Add

kAddierbetrieb k Modo Add k Läget ADD

kAdd functie k Add-innstillingen k Lisäysmuoto

kØgnings-funktion k Modo de adição k Режим добавления

kHozzáadási funkció k Režim přidání k Tryb Add

(D-20TER/DF-120TER/JF-120TER)

$ 1.23 “CUT, ADD2” 123+ 1.23

3.21 321- 4.44

– 1.11 111+ 3.33

2.00 2.= 5.33

$ 5.33

01_GY930_EU15_Ex_0709.p65 05.7.11, 1:56 PM144

–

145

–

kConstant Calculations

Input the number you want to use as a constant, and then press one of the arithmetic keys

twice. This causes the “K” indicator to appear on the display, indicating constant calculations.

kCálculos con constantes

Ingrese el número que desea usar como una constante, y luego presione dos veces una de

las teclas aritméticas. Esto ocasiona que el indicador “K” aparezca sobre la presentación,

indicando los cálculos con constantes.

kCalculs avec constantes

Entrez le nombre que vous désirez utiliser comme constante et appuyez deux fois sur une

des touches arithmétiques. L’indicateur « K » est alors affiché, indiquant les calculs avec

constantes.

kKonstantenrechnungen

Geben Sie die als Konstante zu verwendende Zahl ein, und drücken Sie danach zwei Mal

eine der Arithmetiktasten. Dadurch erscheint die Anzeige „K“ auf dem Display, um damit eine

Konstantenrechnung anzuzeigen.

kCalcoli con costanti

Immettere il numero che si desidera utilizzare come costante, e quindi premere due volte uno

dei tasti aritmetici. Ciò fa apparire sul display l’indicatore “K” che indica i calcoli con costanti.

01_GY930_EU15_Ex_0709.p65 05.7.11, 1:56 PM145

Page is loading ...

Casio FR-2650RC Owner's manual

Casio FR-2650RC Owner's manual

in other languages

Related papers

Other documents