USERS GUIDE
C2125T/S
CL2125T/S
CP2125T/S
GB - 1 -
Contents
Remote Control Buttons ................................. 2
Control Panel Buttons..................................... 3
Connect Peripheral Equipment...................... 4
Via the SCART connector .............................. 5
Via Ant Input .................................................... 5
Decoder .......................................................... 5
Connecting a decoder with an aerial
socket to the TV ........................................ 5
Connecting a decoder without an aerial
socket to the TV ........................................ 5
TV and Video Recorder .................................. 5
Playback NTSC .............................................. 5
Camera and Camcorder ................................ 5
To connect to Front-AV input ..................... 5
Connect the decoder to the video recorder .... 5
Connecting Headphones ................................ 5
Preparation ....................................................... 6
Features ......................................................... 6
Safety Precautions .......................................... 6
SET TOP BOX OPERATION ......................... 8
Before Switching on your TV ......................... 9
Power connection ........................................... 9
Aerial Connections ......................................... 9
How to connect other devices ........................ 9
Inserting batteries in the remote control
handset ........................................................... 9
Switching the TV ON/OFF ............................... 9
To switch the TV on ........................................ 9
To switch the TV off ........................................ 9
Operating the TV ............................................. 9
APS (Automatic Programming System) ......... 9
Operating with the onset buttons .................. 10
Volume Setting ........................................ 10
Programme Selecting ............................. 10
Operating with Remote Control .................... 10
Volume Setting ........................................ 10
Programme Selecting
(Previous or next programme) ................ 10
Programme Selecting (direct access): ... 10
Menu System ................................................ 11
Information Menu .......................................... 11
Sound Menu .................................................. 11
To change sound settings ....................... 11
Setting Volume: ....................................... 11
To Store the Settings: .............................. 11
Picture Menu ................................................. 12
To change picture settings: ..................... 12
Setting Brightness: .................................. 12
Setting Colour: ........................................ 12
Setting Contrast: .................................... 12
Setting Sharpness: ................................. 12
Setting Hue: ............................................ 12
Picture Mode Menu: ................................ 13
To Store the Settings: .............................. 13
Feature Menu ................................................ 13
Sleep Timer: ............................................ 13
Child Lock: .............................................. 13
Installation Menu ........................................... 13
Tuning Menu ............................................ 13
Automatic Search ................................ 14
To name a Programme ........................ 14
To change Standard ............................. 14
Fine Tuning ........................................... 14
Program (Programming) Menu ............... 14
To delete a channel from a programme
number: ................................................ 15
To insert a channel into a programme
number: ................................................ 15
APS (Automatic Programming System):15
TV Setup Menu........................................ 15
Selecting Menu Language .................... 15
Selecting Country................................. 16
Other Features ............................................... 16
Sound Mute................................................... 16
Information on Screen .................................. 16
Teletext ........................................................... 16
To operate Teletext ........................................ 16
To select a page of Teletext .......................... 16
To Select Index Page .................................... 16
To Reveal concealed Information ............... 16
To Stop Automatic Page Change .................. 17
To Select a Subpage Page ........................... 17
To exit Teletext .............................................. 17
To Display the Time ...................................... 17
Tips.................................................................. 17
Specifications ................................................. 18
GB - 2 -
Remote Control Buttons
= Stand By
0 - 9 = Direct Program
I-II = No Function
MENU = MENU
= Programme Up (Cursor Up)
= Cursor Right / Volume +
TV = TV / Quit Menu
(Red) = Sound Menu
(Green) = Picture Menu
F (Yellow)= Feature Menu
(Blue)= Installation Menu
Teletext Buttons
= Time
= Hold
= Reveal
= Index Page
= Teletext
AV = External Source
(AV1, AV3)
= Programme Down (Cursor Down)
= Cursor Left / Volume -
- - = Two Digit Program Number Entry
= Mute
GB - 3 -
Control Panel Buttons
POWER = Power On / Off
-VOLUME = Volume -
VOLUME+ = Volume +
- PROG = Program -
PROG + = Program +
H-PHONE = Headphone 3,6 mm Ø
Front AV input
AUDIO L = Audio left (white)
AUDIO R = Audio right (red)
VIDEO = VCR (yellow)
GB - 4 -
DECODER
FOR SATELLITE RECEIVER
VIDEO
HEADPHONE
AUDIO
CAMERA
21 REAR PANEL
Connect Peripheral Equipment
There is a wide range of audio and video equipment that can be connected to your TV.
The following connection diagrams show you where the different equipment should be connected at the back or the
front side of the TV.
GB - 5 -
Via the SCART connector
Your TV set has one SCART connector sockets. If you
want to connect peripherals (e.g. video, decoder, etc.)
which have SCART connectors, to your TV, use EXT1
inputs.
Via Ant Input
If you want to connect to your TV, peripherals like video-
recorders or decoders, but the device you want to
connect does not have SCART connector you should
connect it to the ANT input of your TV set.
Decoder
Cable TV offers you a wide choice of programs. Most of
them are free, others are to be paid for by the viewer.
This means that you will need to subscribe to the
broadcasting organisation whose programmes you
wish to receive. This organisation will supply you with a
corresponding decoder unit to allow the programmes to
be unscrambled.
For further information ask your dealer. See also the
booklet supplied with your decoder.
Connecting a decoder with an aerial socket to
the TV
Connect the aerial cable.
Connecting a decoder without an aerial socket
to the TV
Connect the decoder to your TV with a SCART lead
to EXTERNAL1. When your decoder has a SCART
connector you can obtain better picture quality if you
connect a SCART lead to EXTERNAL.
Then select the appropriate AV mode by pressing the
AV button.
TV and Video Recorder
Connect the aerial cables.
Better picture quality can be obtained if you also connect
a SCART lead to EXTERNAL1.
Playback NTSC
Connect NTSC VCR player to Euroconnector at the
back of the TV or RCA JACK at the front of the TV.
Then, press AV button to select AV-1 or AV3.
NTSC 4.43 system can be watched at this mode
automatically.
Search for and store the test signal of the
video recorder
Unplug the aerial cable from the aerial socket ANT
of your video recorder.
Switch on your TV and put the video recorder on the
test signal. (See the handbook for your video re-
corder.)
Enter the Tuning menu via the Installation menu.
Search for the test signal of your video recorder in
the same way as you searched for and stored the TV
signals. See Tuning, Search and Store TV channels.
Store the test signal either under programme number
0 or between 55 and 99.
Replace the aerial cable in the aerial socket ANT of
your video recorder once you have stored the test sig-
nal.
Camera and Camcorder
To connect to Front-AV input
Connect your camcorder to the front of your TV.
Connect your equipment to the TV via VIDEO (yel-
low), AUDIO R (red) and AUDIO L (white) inputs .
You should connect the jacks to the input of the same
colour.
Connect the decoder to the video recorder
Some video recorders have a special SCART
connector for decoder.
Connect a SCART lead to the SCART connector of
your decoder and to the special SCART connector of
your video recorder. See also the handbook of your
video recorder.
To connect your video recorder to the TV, see TV and
Video Recorder section.
If you want to connect more equipment to your TV,
consult your dealer.
Connecting Headphones
Use the stereo headphone socket (HP) to connect
headphones. This socket is located on the right hand
side of the television.
GB - 6 -
Preparation
Place TV on a solid surface.
For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations,
please do not place any objects on top of the set.
Features
It is a remote controlled colour television.
100 programmes from VHF, UHF bands or cable channels can be preset.
It can tune cable channels.
Controlling the TV is very easy by its menu driven system.
It has SCART connector socket for external devices (video, video games, audio set, etc.)
Full function Teletext.
It is possible to connect headphone.
APS (Automatic Programming System).
All programmes can be named.
Forward or backward automatic tuning.
Sleep timer.
Automatic sound mute when no transmission.
5 minutes after the broadcasting (closedown), the TV switches itself automatically to stand-by mode.
Safety Precautions
IMPORTANT SAFETY INFORMATION ON OPERATING YOUR TV
Dos and Donts
DOs
This Television has been designed and manufactured to meet international safety standards, but like any electrical
equipment, care must be taken if you are to obtain the best results and safety is to be assured.
DO read the operating instructions before you attempt to use the equipment.
DO consult your dealer if you are in any doubt about installation, operation or safety of your equipment.
DO be careful with glass panels or doors on equipment.
This TV is supplied with a fitted mains plug. This plug must not be cut off as it may contain a special radio interference
filter, the removal of which could lead to impaired performance. If you wish to extend the lead, obtain an appropriate
safety approved extension lead or consult your dealer.
Observe the manufacturers instructions when connecting extension leads to the TV. Check the fuse rating on the
new plug, this should be fitted with a 5 Amp fuse which conforms to either ASTA or BSI (BS1 362) approvals, these
are easily identifiable by either the
or symbols. If you are in any doubt about the installation of an extension
lead, please consult a competent electrician.
GB - 7 -
DONTs
DONT continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any
way switch off, withdraw the mains plug and consult your dealer.
DONT place water filled vessels on top of T.V. cabinets.
DONT remove any fixed cover as this may expose dangerous voltages.
DONT leave equipment switched on when it is unattended unless it is specifically stated that it is designed for
unattended operation or has a stand-by mode. Switch off using the switch on the equipment and make sure your
family know how to do this. Special arrangements may need to be made for infirm or handicapped people.
DONT use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic
safety. It is illegal to watch television whilst driving.
DONT obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating will cause
damage and shorten the life of the equipment.
DONT use makeshift stands and NEVER fix legs or stands to the TV with any screws other than those provided
- to ensure complete safety always use the manufacturers approved stand with the fixings provided.
DONT allow electrical equipment to be exposed to rain or moisture.
ABOVE ALL
NEVER let anyone, especially children push anything into holes, slots or any other opening in the case
- this could result in a fatal electric shock.
NEVER guess or take chances with electrical equipment of any kind - it is better to be safe than sorry!
1. Power Source
The receiver should be operated only from a 220-240V AC, 50 Hz. outlet. Ensure you select the correct voltage setting.
2. Power Cord
The power supply cord should be placed so that they are not likely to be walked on or pinched by items placed upon
them or against them. Pay particular attention to cord where they enter the plug, power outlet, and the point where
they exit from the receiver.
3. Moisture and Water
Do not use this equipment in a humid and damp place (avoid the bathroom, the sink in the kitchen, and near the
washing machine). Do not expose this equipment to rain or water, as this may be dangerous.
4. Cleaning
Before cleaning, unplug the receiver from the main supply, outlet. Do not use liquid or aerosol cleaners. Use with
soft and dry cloth.
5. Ventilation
The slots and openings on the receiver are intended for ventilation and to ensure reliable operation. To prevent
overheating, these openings must not be blocked or covered in anyway.
GB - 8 -
6. Lightning
In case of storm and lightning or when going on holiday, disconnect the power cord from the wall outlet and also
remove aerial socket.
7. Replacement Part
When replacement parts are required, be sure the service technician has used replacement parts which are specified
by the manufacturer or have the same specifications as the original one. Unauthorized substitutions may result in
fire, electrical shock, or other hazards.
8. Servicing
Please refer all servicing to qualified personnel. Do not remove cover as this may result in electric shock.
9. X-rays
The x-rays generated in this television are shielded sufficiently. Beam potential is max. 30kV.
Warning!
Any intervention contrary to regulations, in particular, any modification of high voltage or a replacement of the picture
tube may lead to an increased concentration of x-rays. Any television modified in this way no longer complies with
license and must not be operated.
Instructions for waste disposal:
Packaging and packaging aids are recyclable and should principally be recycled. Packaging materials, such as foil
bag, must be kept away from children.
RISK OF ELECTRIC SHOCK
CAUTION
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock of persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
DO NOT LEAVE YOUR TV IN STAND-BY OR OPERATING WHEN LEFT UNATTENDED FOR A LONG TIME
SET TOP BOX OPERATION
If you are watching a Digital TV broadcast and you wish to change to
a normal TV broadcast, press the TV button* on your Set Top Box
handset to revert to normal TV operation. If you do not, you may
experience a rolling of the picture on your TV. (An example is shown
in the illustration opposite)
* PLEASE NOTE : The TV button on your Set Top Box handset will
be labelled TV, TV/SAT or TV/DTV, whichever
is appropriate to your type of Set Top Box.
GB - 9 -
Before Switching on your TV
Power connection
IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz.
After unpacking, allow the TV set to reach the ambient
room temperature before you connect the set to the
mains.
Aerial Connections
Connect the aerial plug to the aerial input socket lo-
cated at the back of the TV.
How to connect other devices
IMPORTANT: Switch off the TV before connecting any
external device.
Sockets for external connections are on the back of the
TV.
For connection of other devices via SCART connector
(or RCA Jack) refer to the manuals of the related
devices.
Inserting batteries in the remote control
handset
Remove the battery cover located on the back of the
handset by gently pulling upwards from the indicated
part.
Insert two MN2400 AAA or equivalent type batteries
inside.
Replace the battery cover.
NOTE: Remove batteries from remote control handset
when it is not to be used for a long period.Otherwise it
can be damaged due to any leakage of batteries.
Switching the TV ON/OFF
You can operate your TV either using the remote
control handset or directly using the TV onset
buttons.
To switch the TV on
Your TV will switch on in two steps:
1- Press the power button located on the front of the TV.
Then the TV switches itself to standby mode and the
RED LED located below the TV turns on.
2- To switch on the TV from stand-by mode either:
Press a digit button on the remote control so that a
programme number is selected,
or,
Press Programme Up and Down buttons on the front of
the TV or on the remote control respectively, so the TV
will switch on and the RED Led will turn GREEN.
To switch the TV off
Press the stand-by button on the remote control, so
the TV will switch to stand-by mode and the GREEN
LED will become RED, or,
Press the power button located on the front of the
TV.
Operating the TV
You can operate your TV both using the remote
control handset and onset buttons.
APS (Automatic Programming System)
When you turn on your TV for the first time, Auto Setup
menu will be displayed. Auto programming system
automatically programmes your TV according to the
transmission of programme systems in your area. In
this menu if the language setting is incorrect, use
or
buttons to highlight Language and select the
available one using the
or buttons. Then use
the
or buttons to highlight Country. If
country setting is in correct, use
or buttons
to highlight Country, and select using the
or
buttons. Finally use or buttons to
highlight
Start and use or buttons to
begin Auto-Programming. You can use TV button to
cancel Auto-Programming system.
After APS is finalised, a rank list will appear on the
screen. In the rank list you will see the programme
numbers and names assigned to the programmes. At
the first programme with programme number 1 will be
displayed and the programme number 1 will be
selected. Using
or or or key you
can move the flashing number and then display the
GB - 10 -
programme corresponding to the flashing number
pressing RED button.
If you do not accept the correspondence between
programme numbers and names and want to change
them, press
MENU button and then BLUE button,
so that you enter the Installation menu. In the Installation
menu select TUNING menu and enter it. To use tuning
menu, refer to the Tuning submenu in the Installation
Menu section of this manual.
Operating with the onset buttons
Volume setting and programme selection can be made
using the buttons on the front panel.
Volume Setting
Press -Volume button to decrease volume or
Volume+ button to increase volume, so a volume
level scale will be displayed on the screen.
Programme Selecting
Press Programme Up button to select next
programme or Programme Down button to select
the previous programme.
Operating with Remote Control
The remote control handset of your TV is designed to
control all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.
Functions which you can use out of menu system are
described below.
Volume Setting
Press button to increase volume.
Press button to decrease volume.
Programme Selecting
(Previous or next programme)
Press
button to select the next programme.
Press
button to select the previous programme.
Programme Selecting (direct access):
Press digit buttons on the remote control handset to
select programmes between 0 and 9.
Press - - button to select programmes between 10 and
99. - - will be displayed on the screen. Then press the
programme number. (e.g. for programme 27, press 2
and 7)
Press directly the programme number to reselect single
digit programmes.
GB - 11 -
Menu System
Your TV has been designed with a menu system, to
provide an easy manipulation of a multifunction system.
The TV is controlled by choosing the commands
displayed on the screen.
Below is described the use of the menu system.
Press Menu
MENU button. Main menu will be
displayed on the screen.
On the remote control each option is identified with a
different colour. To select an option, press the button
with the corresponding colour, on the remote control
handset. For example for sound settings, press RED
button, for picture settings, press GREEN button etc.
Information Menu
When you press the information button in any
menu an explanation is given of how to:
Select and go to a submenu
Select and change items
go to the previous menu
exit that menu
is given.
If the button is pressed when none of the menus
activated, the TV status including Program number,
name and Sound Mode will be displayed.
In all the menus, pressing
or button one of the
items can be selected, pressing
or button
item can be changed or you can go to submenu,
pressing the
MENU button you can go to the
previous menu and by pressing the TV button you will
exit the menu.
Sound Menu
To change sound settings
Enter the Sound Menu directly, pressing the Red but-
ton
or,
Press
MENU button, now you are in main
menu. In the main menu, select SOUND using
or
button, then enter the sound menu pressing
or button.
Setting Volume:
As you enter the sound menu, Volume will be the first
selected option.
Press
button to increase volume.
Press button to decrease volume.
Or you can directly change the volume settings using
(to increase) or (to decrease) button.
To Store the Settings:
Using
or button select Store. Press
or
button to store current sound settings. The
stored values will be valid for all the programmes.
GB - 12 -
Picture Menu
To change picture settings:
Enter the Picture Menu directly, pressing the GREEN
button
or,
Press
MENU button, now you are in main menu.
In the main menu, select PICTURE using
or
button, then enter the picture menu pressing
or button.
Setting Brightness:
As you enter the picture menu, Brightness will be the
first selected option.
Press
button to increase brightness.
Press
button to decrease brightness.
Setting Colour:
Using
or button select Colour.
Press
button to increase colour level.
Press
button to decrease colour level.
Setting Contrast:
Using
or button select Contrast.
Press
button to increase contrast level.
Press button to decrease contrast level.
Setting Sharpness:
Using
or button select sharpness.
Press
button to increase sharpness level.
Press
button to decrease sharpness level.
Setting Hue:
(If your TV set has a Playback NTSC system, this will
appear) (In AV mode only) :
Using
or button select Hue.
Press
button to increase hue level.
Press button to decrease hue level.
GB - 13 -
Picture Mode Menu:
This menu is used to change the picture size according
to the coming transmission.
If auto function is selected, then the picture size will
be automatically changed according to the transmis-
sion.
Selecting 4 : 3 mode forces picture ratio size to 4 : 3.
Selecting 16 : 9 mode forces picture ratio size to
16 : 9.
To Store the Settings:
Using
or button select Store. Press
or
button to store current picture settings. The
stored values will be valid for all the programmes. Pic-
ture Mode setting is stored for each program
indivudually.
Feature Menu
Enter the Feature Menu directly, pressing the YEL-
LOW button F or,
Press
MENU button, now you are in main menu.
In the main menu, select FEATURE, using
or
button. Then enter the feature menu pressing
or button.
Sleep Timer:
As you enter the feature menu, Sleep Timer will be
the first selected option.
Use
or button to change the value of the
sleep timer between Off, 0:15, 0:30, 0:45, 1:00, 1:15,
1:30, 1:45, 2:00 hours. Your TV will get into standby
mode when the period you selected passes after you
make the selection.
Child Lock:
You can use this feature to prevent display of any
programme you do not want to be watched.
The Child Lock feature may be set to either On or Off.
When Off is selected, there will be no difference in
the operation of your TV. When On is selected, the TV
can only be controlled by the remote control handset.
In this case, the front panel buttons (except the
Switch On/Off button) will not work.
Installation Menu
This menu consists of Tuning, Program. (Programming)
and TV Configuration submenus.
Tuning Menu
Press
MENU button so that you enter the main
menu. In the main menu select Installation using
or button and open the installation menu
pressing
or button. (To open the Installa-
tion Menu directly, do not enter the main menu, but
only press the BLUE button). In the installation menu
select TUNING. Pressing
or button, en-
ter the TUNING menu.
GB - 14 -
Automatic Search
Programme will be the first selected item as you
enter the TUNING menu. Pressing or
button select the programme where you want the
tuned station to be stored. (You may also type the
programme number using the digit buttons.)
Press
or button to select Band. Using
or button, select the band in which
search is to be made.
With the
or button, select Search.
Search can be made either forward, pressing
button or backwards, pressing
button.
If the tuned station is not the desired one, you can
continue searching pressing
or button
again.
When the desired station is tuned, select STORE
using
or button and store it to the
programme number you selected pressing
or
button.
To stop searching before a channel is found, press
the reverse direction button (for example when
searching is made in forward direction, press back-
wards direction button to stop searching).
To name a Programme
First select the programme number you want to name.
Then select name option using
or button. After
that press
or button to select the position
of the letter to be changed and press
or button
to change that letter. After that select and change the
other letters as well in order to name the programme
correctly. Finally to store the name, select store option
using
or button and store it pressing or
button.
To change Standard
(You can change this menu only between standards
which your TV set supports.)
Pressing
or button selects the Broadcast
Standard required. Then select the standard you want
pressing
or button. When changing the
standard this way, if the previous channel is not defined
for the new selected standard, then also the channel will
be changed to the first defined channel of that standard
(For example: When changing BG to K1 and the
previous channel is C12, after changing the standard,
the channel will be C4, because the first defined channel
of standard K1 is C4). After that, if it is returned to the
previous standard back, the channel will not be changed
to the previous one anymore (That means, in the
example above, when it is returned from K1 to BG
again, the channel will not change to C12 anymore and
keep C4). Defined channels for different standards are
given as following:
B/G : C01-C69, S01-S41
D/K : C01-C12, C21-C69, S01-S19, S22-S41
I* : C21-C69
I** : C01-C17, C21-C69, S01-S19, S22-S41
L/L : C01-C11, C21-C69, S01-S41
K1 : C04-C09
* U.K. I (UHF)
** IRELAND I (VHF, UHF)
Fine Tuning
Picture or sound quality can be poor in areas where the
receptions is weak. In such cases, picture and sound
quality can be improved by fine tuning. To make fine
tuning:
In the tuning menu, press
or button to se-
lect the Fine Tuning item. Pressing the
button
continuously will cause the fine tuning be made for-
ward while pressing the
button continuously will
cause the fine-tuning to be made backwards. When
you are satisfied with the reception of transmission,
store it. To store the fine tuning setting select the
STORE option using either the
or button
and store it to the selected programme number by
pressing either of the
or buttons.
Program (Programming) Menu
Program. (Programming) menu is used to display the
programme names and numbers. You can use this
menu to delete a channel, to insert a channel and to
autostore the programmes.You can access this menu
directly via
INFO button in no menu condition.
Select the PROGRAM Menu pressing the
or
button and open it by pressing
or buttons.
When you enter the programme menu, all the
programme numbers and names will be displayed on
the screen. The programme name and number of the
tuned channel will be displayed in red. All the other
channel numbers will be black and at first the
programme number 1 will be flashing. You can move the
flashing number using the
or buttons. As you
pass through the programme numbers this way, to
reach the programme number you want, the channels
corresponding to the programme numbers you pass
through will not be tuned.
Pressing the RED button will tune the channel on the
flashing programme number. Now the colour of the
flashing programme number will be red. Again you can
use the
or or or buttons.
GB - 15 -
To delete a channel from a programme number:
Move the flashing onto the channel you want to de-
lete.
Press the YELLOW button. Now the corresponding
channel will be deleted and all the other channels be-
low this programme number will be moved one
programme number up.
To insert a channel into a programme number:
Move the flashing onto the selected channel.
Press the RED button, so that channel will be dis-
played on the screen.
Move the flashing onto the selected programme num-
ber. Now pressing the GREEN button will insert the
channel on screen displayed into that programme
number. If a channel is moved to a lower programme
number, channels between the previous and current
position of the selected channel will be moved one
programme number up and if a channel is moved to a
upper programme number, channels between the
previous and current position of the selected channel
will be moved one programme number down.
APS (Automatic Programming System):
The APS menu will appear when you first switch on your
TV for the first time. APS automatically programmes
your TV, according to the transmission of programme
systems in your area.
If you want to run APS at any other time:
Press BLUE button. Now you are in the Auto Tune
menu.
Select Program menu using
or button.
Press either the
or button to enter the
Program menu.
In the program menu enter the Auto Tune menu by
pressing the BLUE button, APS is starting.To stop
APS press the TV button.
After APS is finalised, a rank list will appear on the
screen. . In the rank list you will see the programme
numbers and names, assigned to the programmes.
First the programme with programme number 1 will be
displayed and it will be flashing. Using the
or
or
or buttons you can move the flashing
number and then display the programme corresponding
to that flashing number by pressing the RED button.
If you do not accept the line up between the programme
numbers and names and want to change them, press
the
MENU button and then the BLUE button, so
entering the Installation menu. In the Installation menu
select the TUNING menu and enter it. To use the
TUNING menu, refer to the Tuning submenu in the
Installation Menu section of this manual.
TV Setup Menu
This menu is used to select the Menu Language.
Selecting Menu Language
To select menu language:
Press
MENU button so that you enter the main
menu.
In the main menu select Installation using
or
button.
Open the installation menu pressing the
or
button . (To open the Installation Menu di-
rectly, do not enter the main menu but only press the
BLUE button).
In the installation menu select TV Setup using
or
button.
Open the TV Setup menu using
or but-
ton.
In the TV Setup menu select Language and you
can change the language to the one you require, us-
ing the
or buttons. As soon as you
change the language, the menu items will be dis-
played in the selected language.
GB - 16 -
Selecting Country
Press
MENU button so that you enter the main
menu.
In the main menu select Installation using
or
button.
Open the installation menu pressing the
or
button. (To open the Installation Menu di-
rectly, do not enter the main menu but only press the
BLUE button).
In the installation menu select TV Setup using
or
button.
Open the TV Setup menu using
or but-
ton.
In the TV Setup menu select Country using
or
button. Change the country pressing or
button.
Other Features
Sound Mute
To cut off the sound of the TV press button. The
sound will be muted. To cancel mute, press
or
or buttons. The volume level will return to
the level it was before the sound was muted.
Information on Screen
After the selection of a TV programme from peripheral
equipment, e.g. VCR, DVD player, satellite receiver or
decoder, the following information will appear on your
screen:
The programme number and name of the selected
TV channel.
The currently selected mode (not with a programme
coming from a peripheral or through a decoder).
Also
sound muted sign will be displayed when the
sound is temporarily interrupted.
Teletext
Teletext is an information system that displays text on
your TV screen. Using the Teletext information system
you can view a page of information on a subject that is
available in the list of contents (index).
No on screen display will be available in text mode.
No contrast, brightness or colour control, but volume
control is available in text mode.
To operate Teletext
Select a TV station on which Teletext is being trans-
mitted.
Press (TELETEXT)
button. Usually the list of
contents (index) is displayed on the screen.
To select a page of Teletext
Press the appropriate digit buttons for the required
Teletext page number.
The selected page number is displayed at the top left
corner of the screen. The Teletext page counter
searches until the selected page number is located, so
that the desired page is displayed on the screen.
Press
button to move the Teletext screen for-
ward one page at a time.
Press
button to move the Teletext screen back-
ward one page at a time.
To Select Index Page
To select the page number of the index (generally
page 100), press
button.
To Reveal concealed Information
Pressing button once will reveal answers on a
quiz or games page.
Pressing
button again will conceal the re-
vealed answers.
GB - 17 -
To Stop Automatic Page Change
The teletext page you have selected may contain more
information than what is on the screen; the rest of the
information will be displayed after a period of time.
Press
button to stop the automatic page
change.
Press
button again to allow the next page to be
displayed.
To Select a Subpage Page
Subpage pages are subsections of long Teletext pages
that can only be displayed on the screen one section at
a time.
Select the required Teletext page.
Press
button.
Select the required Subpage page number by press-
ing four digit buttons (e.g. 0001).
Teletext page number will be displayed on the upper
left corner of the screen when the selected page is
found.
To exit Teletext
Press TV button. The screen will switch to TV
mode.
To Display the Time
While watching a TV programme with Teletext trans-
mission press
button. The current time infor-
mation, captured from Teletext will be displayed at the
upper right corner of the screen.
If the programme being watched does not have Tele-
text transmission, only a blue box will be displayed at
the same location.
The time information will disappear after pressing
button again.
When time information is displayed on screen, entering
another menu will remove it, but after leaving that menu
time information will appear again.
Tips
Care of the Screen
Clean the screen with a slightly damp, soft cloth. Do not
use abrasive solvents as they may damage the TV
screen coating layer.
Poor Picture
Have you selected the correct TV system? Is your TV
set or house aerial located too close to the
loudspeakers, non-earthed audio equipment or neon
lights, etc. ?
Mountains or high buildings can cause double pictures
or ghost images. Sometimes you can improve the
picture quality by changing the direction of the aerial.
The picture quality may degrade when two peripherals
are connected to the TV at the same time. In such a
case, disconnect one of the peripherals.
No Picture:
Is the aerial connected properly? Are the plugs
connected tightly to the aerial socket? Is the aerial cable
damaged? Are suitable plugs used to connect the
aerial? If you are in doubt, consult your dealer.
No Picture means that your TV is not receiving any
transmission. Have you pressed the correct keys on the
remote control? Try once more.
Remote Control:
Your TV no longer responds to the remote control.
Press the TV button on the remote control once more.
Perhaps the batteries are exhausted. If so you can still
use the local keys at the front of your TV.
Have you selected the wrong menu? Press TV key to
return to TV mode or press
MENU to return to the
previous menu.
No solution:
Switch your TV set off and on. If this does not work, call
the service personnel; never attempt to repair it yourself.
GB - 18 -
Specifications
TV BROADCASTING STANDARD .............. PAL B/G (CP2125T)
PAL SECAM B/G L/L (CL 2125 T)
RECEIVING CHANNELS ............................. VHF (BAND I/III)
UHF (BAND U)
HYPERBAND
CABLE TV (S1-S20/ S21-S41)
NUMBER OF PRESET CHANNELS ........... 100
CHANNEL INDICATOR................................ On Screen Display
RF AERIAL INPUT ....................................... 75 Ohm (unbalanced)
OPERATING VOLTAGE .............................. 220-240V AC, 50 Hz.
AUDIO OUTPUT ......................................... Mono
AUDIO OUTPUT POWER
(W
RMS.
) (%1 THD) ....................................... 5
POWER CONSUMPTION (W) (nom.) ........ 65
ST-BY POWER CONSUMPTION (W) ........ <5
PICTURE TUBE .......................................... 21 (51 cm.)
DIMENSIONS (mm)
D ................................................................ 473
L ................................................................ 563
H ................................................................ 442
WEIGHT (kg) ............................................... 18.5
Hitachi, Ltd. Tokyo, Japan
International Sales Division
THE HITACHI ATAGO BUILDING,
No. 15 –12 Nishi Shinbashi, 2 – Chome,
Minato – Ku, Tokyo 105-8430, Japan.
Tel: 03 35022111
HITACHI EUROPE LTD,
Whitebrook Park
Lower Cookham Road
Maidenhead
Berkshire
SL6 8YA
UNITED KINGDOM
Tel: 01628 643000
Fax: 01628 643400
Email: consumer-service@hitachi-eu.com
HITACHI EUROPE S.A.
364 Kifissias Ave. & 1, Delfon Str.
152 33 Chalandri
Athens
GREECE
Tel: 1-6837200
Fax: 1-6835964
Email: service.hellas@hitachi-eu.com
HITACHI EUROPE GmbH
Munich Office
Dornacher Strasse 3
D-85622 Feldkirchen bei München
GERMANY
Tel: +49-89-991 80-0
Fax: +49-89-991 80-224
Hotline: +49-180-551 25 51 (12ct/min)
Email: HSE-DUS.service@hitachi-eu.com
HITACHI EUROPE S.A.
Gran Via Carlos III, 101-1
08028 Barcelona
SPAIN
Tel: 93 409 2550
Fax: 93 491 3513
Email: atencion.cliente@hitachi-eu.com
HITACHI EUROPE srl
Via Tommaso Gulli N.39, 20147
Milano, Italia
ITALY
Tel: +39 02 487861
Tel: +39 02 38073415 Servizio Clienti
Fax: +39 02 48786381/2
Email: customerservice.italy@hitachi-eu.com
HITACHI Europe AB
Box 77 S-164 94 Kista
SWEDEN
Tel: +46 (0) 8 562 711 00
Fax: +46 (0) 8 562 711 13
Email: csgswe@hitachi-eu.com
HITACHI EUROPE S.A.S
Lyon Office
B.P. 45, 69671 BRON CEDEX
FRANCE
Tel: 04 72 14 29 70
Fax: 04 72 14 29 99
Email: france.consommateur@hitachi-eu.com
HITACHI EUROPE LTD (Norway) AB
STRANDVEIEN 18
1366 Lysaker
NORWAY
Tel: 67 5190 30
Fax: 67 5190 32
Email: csgnor@hitachi-eu.com
HITACH EUROPE AB
Egebækgård
Egebækvej 98
DK-2850 Nærum
DENMARK
Tel: +45 43 43 6050
Fax: +45 43 60 51
Email: csgnor@hitachi-eu.com
HITACHI EUROPE AB
Neopoli / Niemenkatu 73
FIN-15140 Lahti
FINLAND
Tel : +358 3 8858 271
Fax: +358 3 8858 272
Email: csgnor@hitachi-eu.com
Hitachi Europe Ltd
Bergensesteenweg 421
1600 Sint-Pieters-Leeuw
BELGIUM
Tel: +32 2 363 99 01
Fax: +32 2 363 99 00
Email: sofie.van.bom@hitachi-eu.com
HITACHI EUROPE LTD
Na Sychrove 975/8
101 27 Pr aha 10 – Bohdalec
CZECH REPUBLIC
Tel: +420 267 212 383
Fax: +420 267 212 385
Email: csgnor@hitachi-eu.com
www.hitachidigitalmedia.com
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
Hitachi CMP307XU User manual
- Category
- LCD TVs
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Hitachi CL2842S User manual
-
-
-
-
-
-
-
-
-