Osram 48446 Installation guide
- Category
- Motorcycle Accessories
- Type
- Installation guide
Osram 48446 is an electronic ballast that is designed for use with T12 fluorescent lamps. It operates on a voltage range of 120-277 volts and has a power factor of >0.98. The ballast has a starting method of rapid start and a circuit type of series. It has a starting temperature of 4 -20°F (-29°C) for F96T12HO; 60°F (16°C) for SUPERSAVER F96T12HO/SS. The ballast has a lamp CCF of less than 1.7, a lamp frequency of >20 kHz, and a low THD of <10%. It has a voltage range of ±10% of Rated Input and an input frequency of 50/60 Hz. The ballast is cUL Listed Class P, Type 1 Outdoor and has a 75
Osram 48446 is an electronic ballast that is designed for use with T12 fluorescent lamps. It operates on a voltage range of 120-277 volts and has a power factor of >0.98. The ballast has a starting method of rapid start and a circuit type of series. It has a starting temperature of 4 -20°F (-29°C) for F96T12HO; 60°F (16°C) for SUPERSAVER F96T12HO/SS. The ballast has a lamp CCF of less than 1.7, a lamp frequency of >20 kHz, and a low THD of <10%. It has a voltage range of ±10% of Rated Input and an input frequency of 50/60 Hz. The ballast is cUL Listed Class P, Type 1 Outdoor and has a 75
ECS452 - 6-13
T12HO SYSTEMS
Item Number 50319 QTP 2 x 96T12 / HO / UNV
QUICKTRONIC
Number of Lamps
Line Voltage (120-277V)
System Type
Primary Lamp Type
Input Input System
Current Rated
2
Ballast Power Efficacy
Item OSRAM SYLVANIA (AMPS) Lamp
1
Lumens No. of Factor System (W) (lm/W)
Number Description @120/277V Type (lm) Lamps (BF) Lumens @120/277V @120/277V BEF
3
50319 QTP2x96T12HO/UNV 1.65/0.71 F96T12HO 9050 2 0.85 15,385 196 78 0.43
1.38/0.60 F96T12HO/SS 8000 2 0.90 14,400 164 88 0.55
1.30/0.56 F72T12HO 6250 2 0.90 11,250 154 73 0.58
1.10/0.47 F60T12HO 5200 2 0.90 9360 132 71 0.68
0.88/0.38 F48T12HO 4050 2 0.90 7290 104 70 0.87
0.88/0.38 F96T12HO 9050 1 0.92 8325 104 80 0.88
1 Also compatible with other manufacturer’s equivalent lamp types that meet ANSI standards.
2 96T12HO rated lamp lumens and performance data based on F96T12CW/HO/SS and F96T12/D41/HO series lamps.
3 Ballast Efficiency Factor (BEF) shown = (Ballast Factor x 100) divided by Input Power (Note: calculation based on lowest wattage value).
50319 replaces discontinued item numbers 49883 QT2x96/120 HO and 49884 QT 2x96/277HO
Catalog # Date Type
Project Prepared by
Comments
SPECIFICATION DATA
Performance Guide
QUICKTRONIC
®
T12HO Rapid Start Electronic Fluorescent Ballasts Universal Voltage (120-277V)
Starting Method: Rapid Start
Circuit Type: Series
Starting Temp:
4
-20°F (-29°C)
for F96T12HO; 60°F (16°C) for
SUPERSAVER F96T12HO/SS
Lamp CCF: Less than 1.7
Lamp Frequency: >20 kHz
Low THD: <10%
Voltage Range: ±10% of Rated Input
Input Frequency: 50/60 Hz
Power Factor: >98%
cUL Listed Class P, Type 1 Outdoor
75°C Max Case Temperature
FCC 47CFR Part 18 Non-Consumer
ANSI C62.41 Cat A. Transient Protection
Remote Mounting: Contact OSI for
remote mounting options.
Class A Sound Rating
4 Operation below 50ºF (10°C) may affect light
output or lamp operation – see
“Low Temp. Starting” definition.
Specifications
Data based on F96T12HO
System Life / Warranty
QUICKTRONIC products are covered
by the QUICK 60+
®
warranty,
a comprehensive warranty. For
additional details, refer to the
QUICK 60+ warranty bulletin.
Normal Ballast Factor
96 T12HO
Professional Series
Note: For one lamp application,
individually cap each yellow lead. Insulate to 600 volts.
Length
Mounting
Length
Height
Width
QUICKTRONIC 2x96T12HO
LAMP
LAMP
LAMP
BALLAST
Blue
Blue
Blue
Red
Black
White
Note: For two lamp application, cap any blue lead. Insulate to 600 volts.
QUICKTRONIC 3x32
BALLAST
LAMP
Black
White
Blue
Red
QUICKTRONIC 1x32
BALLAST
LAMP
LAMP
LAMP
LAMP
Black
White
Yellow
Yellow
Blue
Blue
Red
Red
Note: For three lamp application, cap any unused blue lead. Insulate to 600 volts.
QUICKTRONIC 4x32
QUICKTRONIC 1x40DL
BALLAST
Black
White
Blue
Red
BALLAST
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
QUICKTRONIC 2x40DL
Black
White
Blue
Blue
Red
Note: For one lamp application, cap any unused blue lead. Insulate to 600 volts.
QUICKTRONIC 2x59*
QUICKTRONIC 2x96IS
BALLAST
Black
White
Blue
Blue
Red
LAMP
LAMP
QUICKTRONIC 2x96HO
Black
Line
White
Yellow
Yellow
Blue
Blue
Red
Red
BALLAST
LAMP
LAMP
LAMP
LAMP
Blue
Blue
Red
BALLAST
Black
White
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
QUICKTRONIC 2x32
BALLAST
QUICKTRONIC FM (1 LAMP)
Note: For QT-FM green ground wire to terminal required.
LAMP
Black
White
Blue
Red
QUICKTRONIC 3x40DL
BALLAST
Black
White
Blue
Blue
Blue
Red
Note: For two lamp application, cap any blue lead. Insulate to 600 volts.
QUICKTRONIC FM (2 LAMP)
Note: For QT-FM green ground wire to terminal required.
LAMP
LAMP
Blue
Yellow
Red
BALLAST
Green
Black
Green
White
LAMP
LAMP
LAMP
BALLAST
Blue
Blue
Blue
Red
Black
White
Note: For two lamp application, cap any blue lead. Insulate to 600 volts.
QUICKTRONIC 3x32
BALLAST
LAMP
Black
White
Blue
Red
QUICKTRONIC 1x32
BALLAST
LAMP
LAMP
LAMP
LAMP
Black
White
Yellow
Yellow
Blue
Blue
Red
Red
Note: For three lamp application, cap any unused blue lead. Insulate to 600 volts.
QUICKTRONIC 4x32
QUICKTRONIC 1x40DL
BALLAST
Black
White
Blue
Red
BALLAST
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
QUICKTRONIC 2x40DL
Black
White
Blue
Blue
Red
Note: For one lamp application, cap any unused blue lead. Insulate to 600 volts.
QUICKTRONIC 2x59*
QUICKTRONIC 2x96IS
BALLAST
Black
White
Blue
Blue
Red
LAMP
LAMP
QUICKTRONIC 2x96HO
Black
Line
White
Yellow
Yellow
Blue
Blue
Red
Red
BALLAST
LAMP
LAMP
QUICKTRONIC 1x96HO
Black
Line
White
Yellow
Yellow
Blue
Blue
Red
Red
BALLAST
LAMP
LAMP
LAMP
Blue
Blue
Red
BALLAST
Black
White
Note: For one lamp application, cap any blue lead. Insulate to 600 volts.
QUICKTRONIC 2x32
BALLAST
QUICKTRONIC FM (1 LAMP)
Note: For QT-FM green ground wire to terminal required.
LAMP
Black
White
Blue
Red
QUICKTRONIC 3x40DL
BALLAST
Black
White
Blue
Blue
Blue
Red
Note: For two lamp application, cap any blue lead. Insulate to 600 volts.
QUICKTRONIC FM (2 LAMP)
Note: For QT-FM green ground wire to terminal required.
LAMP
LAMP
Blue
Yellow
Red
BALLAST
Green
Black
Green
White
Dimensions:
Overall: 11.8" L x 2.15" W x 1.61" H
Mounting: 11.0"
Packaging:
Quantity: 6 pieces
Weight: 2.77 lbs ea. (1260 grams)
Wiring:
Leads
OSRAM SYLVANIA
National Customer
Service and Sales Center
1-800-LIGHTBULB
(1-800-544-4828)
www.sylvania.com
T12HO SYSTEMS
SYLVANIA, the system solution, SUPERSAVER and QUICK 60+ are registered trademarks of OSRAM SYLVANIA Inc.
SEE THE WORLD IN A NEW LIGHT is a trademark of OSRAM SYLVANIA Inc. QUICKTRONIC is a registered trademark of OSRAM GmbH.
OSRAM SYLVANIA
National Customer
Service and Sales Center
1-800-LIGHTBULB
(1-800-544-4828)
www.sylvania.com
Input Input System
Current Rated Ballast Power Efficacy
2
Item OSRAM SYLVANIA (AMPS) Lamp
1
Lumens No. of Factor System (W) (Im/W)
Number Description @120/277V Type (lm) Lamps (BF) Lumens @120/277V @120/277V BEF
1
50314 QTP2x40T12/UNV/RS/SC 0.62/0.27 F40T12/D30/ECO 3200 2 0.88 5630 74/74 76 1.19
0.53/0.23 F34/D830/SS 2900 2 0.85 4930 63/63 78 1.35
50308 QTP2x96/T12/UNV/IS 1.12/0.50 F96T12/D41/ECO 6420 2 0.86 11,040 134/130 82/85 0.66
0.91/0.40 F96T12/CW/SS 5300 2 0.87 9220 108/106 85/87 0.82
0.88/0.40 F72T12/CW 4500 2 0.92 8280 105/103 79/80 0.89
0.62/0.28 F48T12/CW 2820 2 0.92 5190 73/71 71/73 1.30
0.52/0.24 F48T12/SS/CW 2450 2 0.92 4510 62/61 73/74 1.51
0.69/0.31 F96T12/D41/ECO 6420 1 1.01 6485 82/81 79/80 1.25
0.56/0.27 F96T12/CW/SS 5300 1 1.10 5830 67/66 87/88 1.67
0.55/0.26 F72T12/CW 4500 1 1.07 4815 65/64 74/75 1.67
New 50308 QTP2x96T12/UNV/IS model replaces 50318 that is discontinued.
Also compatible with other manufacturer’s equivalent lamp types that meet ANSI standards.
1 Ballast Efficiency Factor (BEF) shown = (Ballast Factor x 100) divided by Input Power (Note: calculation based on lowest wattage value).
2 System Efficacy calculation based on lowest input power value unless otherwise noted.
Catalog # Date Type
Project Prepared by
Comments
SPECIFICATION DATA
QUICKTRONIC
®
T12 Electronic Fluorescent Ballasts
40T12RS & 96T12IS Universal Voltage (120-277V)
Starting Method:
RS - Rapid Start
IS - Instant Start
Circuit Type: RS - Parallel
IS - Parallel
Starting Temp: 0°F (-18°C)
SUPERSAVER
®
Lamps: 60°F(16°C)
Input Frequency: 60 Hz
THD: QTP40T12/UNV RS: <10%;
QTP2x96T12 IS: <15%
Power Factor:
QTP40T12/UNV RS:>97%
QTP2x96T12 IS >0.96 (for F96T12);
>0.91(for other lamps)
Input Voltage: ±10% of Rated Input
Lamp Crest Factor: <1.8
Lamp Frequency: >20 kHz
UL Listed Class P, Type 1 Outdoor
CSA or CUL Certified
70°C Max. Case Temp.
FCC 47CFR Part 18 Non-Consumer
Class A Sound Rating
ANSI C62.41 Cat A. Transient Protection
Specifications
Data based on F40T12 for RS, F96T12 for IS
Item Number 50314 QTP 2 x 40T12 / UNV / RS SC
QUICKTRONIC PROFESSIONAL
Number of Lamps (2)
Case Size
Starting Type / Ballast Factor
Line Voltage (120-277V)
Primary Lamp Wattage
System Life / Warranty
QUICKTRONIC products are covered by the
QUICK 60+
®
warranty. For additional details,
refer to the QUICK 60+ warranty bulletin.
Normal Ballast Factor
T12
Professional Series
Dimensions:
Model QTP2x40T12/UNV/RS/SC enclosure size
Overall: 9.5" L x 1.38" W x 1.18" H
Mounting: 8.9"
Weight: 1.25 lbs ea. (approx.)
Dimensions:
Model QTP2x96/T12/UNV/IS enclosure size
Overall: 11.75" L x 2.15" W x 1.61" H
Mounting: 11"
Weight: 4.67 lbs ea. (approx.)
QTP2X96/T12/UNV/IS
LAMP
LAMP
Blue
Blue
Red
Black
White
LAMP
Blue
Blue
Red
Black
White
Line
Line
BALLAST
BALLAST
Cap off/Insulate unused leads for 1000V.
Ground Ballast and mount lamps within 1/2" of grounded metal reflector
QTP 2x96T12 IS
Note: For one lamp application,
cap blue lead. Insulate to 1000 volts.
Performance Guide
QTP2X40T12/UNV/RS/SC
BALLAST
LAMP
White
BlackLine
Yellow
Yellow
Blue
Blue
Red
Red
LAMP
BALLAST
White
BlackLine
Ground Ballast and mount lamps within 1/2" of grounded metal reflector
Yellow
Yellow
Blue
Blue
Red
Red
LAMP
Cap off/Insulate unused leads for 600V.
QTP 2x40T12 RS
QTP2X40T12/UNV/RS/SC
BALLAST
LAMP
White
BlackLine
Yellow
Yellow
Blue
Blue
Red
Red
LAMP
BALLAST
White
BlackLine
Ground Ballast and mount lamps within 1/2" of grounded metal reflector
Yellow
Yellow
Blue
Blue
Red
Red
LAMP
Cap off/Insulate unused leads for 600V.
©2013 OSRAM SYLVANIA
-
1
-
2
Osram 48446 Installation guide
- Category
- Motorcycle Accessories
- Type
- Installation guide
Osram 48446 is an electronic ballast that is designed for use with T12 fluorescent lamps. It operates on a voltage range of 120-277 volts and has a power factor of >0.98. The ballast has a starting method of rapid start and a circuit type of series. It has a starting temperature of 4 -20°F (-29°C) for F96T12HO; 60°F (16°C) for SUPERSAVER F96T12HO/SS. The ballast has a lamp CCF of less than 1.7, a lamp frequency of >20 kHz, and a low THD of <10%. It has a voltage range of ±10% of Rated Input and an input frequency of 50/60 Hz. The ballast is cUL Listed Class P, Type 1 Outdoor and has a 75
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
GE 31266 User manual
-
-
Sylvania QUICKTRONIC POWERSENSE T8 User manual
-
QUICKTRONIC MH Electronic Metal Halide Systems Installation guide
-
-
-
AbleNet Blue2 Quick start guide
-
Sylvania Indoor Furnishings T5 User manual
-
-
Alto 800 Series T12 User manual
