Osram 48446 is an electronic ballast that is designed for use with T12 fluorescent lamps. It operates on a voltage range of 120-277 volts and has a power factor of >0.98. The ballast has a starting method of rapid start and a circuit type of series. It has a starting temperature of 4 -20°F (-29°C) for F96T12HO; 60°F (16°C) for SUPERSAVER F96T12HO/SS. The ballast has a lamp CCF of less than 1.7, a lamp frequency of >20 kHz, and a low THD of <10%. It has a voltage range of ±10% of Rated Input and an input frequency of 50/60 Hz. The ballast is cUL Listed Class P, Type 1 Outdoor and has a 75
Osram 48446 is an electronic ballast that is designed for use with T12 fluorescent lamps. It operates on a voltage range of 120-277 volts and has a power factor of >0.98. The ballast has a starting method of rapid start and a circuit type of series. It has a starting temperature of 4 -20°F (-29°C) for F96T12HO; 60°F (16°C) for SUPERSAVER F96T12HO/SS. The ballast has a lamp CCF of less than 1.7, a lamp frequency of >20 kHz, and a low THD of <10%. It has a voltage range of ±10% of Rated Input and an input frequency of 50/60 Hz. The ballast is cUL Listed Class P, Type 1 Outdoor and has a 75
Osram 48446 is an electronic ballast that is designed for use with T12 fluorescent lamps. It operates on a voltage range of 120-277 volts and has a power factor of >0.98. The ballast has a starting method of rapid start and a circuit type of series. It has a starting temperature of 4 -20°F (-29°C) for F96T12HO; 60°F (16°C) for SUPERSAVER F96T12HO/SS. The ballast has a lamp CCF of less than 1.7, a lamp frequency of >20 kHz, and a low THD of <10%. It has a voltage range of ±10% of Rated Input and an input frequency of 50/60 Hz. The ballast is cUL Listed Class P, Type 1 Outdoor and has a 75
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI