Tektronix AD007 User manual

Brand: Tektronix

Model: AD007

Category: Networking

Type: User manual

Form 080/01

Complimentary Reference Material

This PDF has been made available as a complimentary service for you to assist in

evaluating this model for your testing requirements.

TMG offers a wide range of test equipment solutions, from renting short to long

term, buying refurbished and purchasing new. Financing options, such as

Financial Rental, and Leasing are also available on application.

TMG will assist if you are unsure whether this model will suit your requirements.

Call TMG if you need to organise repair and/or calibrate your unit.

If you click on the “Click-to-Call” logo below, you can all us for FREE!

TMG Corporate Website TMG Products Website

Disclaimer:

All trademarks appearing within this PDF are trademarks of their respective owners.

AD007

GPIB-LAN Adapter

User Manual

071-0245-01

are owned by Tektronix or its suppliers and are protected by United States

Use, duplication, or disclosure by the Government is subject to restrictions as

set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and

Computer Software clause at DFARS 252.227-7013, or subparagraphs (c)(1)

and (2) of the Commercial Computer Software – Restricted Rights clause at

FAR 52.227-19, as applicable.

Tektronix products are covered by U.S. and foreign patents, issued and

pending. Information in this publication supercedes that in all previously

published material. Specifications and price change privileges reserved.

Printed in the U.S.A.

Tektronix, Inc., P.O. Box 1000, Wilsonville, OR 97070–1000

TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.

WaveStar is a trademark of Tektronix, Inc.

Adobe, Acrobat, and the Acrobat logo are trademarks of Adobe Systems

Incorporated which may be registered in certain jurisdictions.

Microsoft, DriveSpace, MS, MS-DOS, Windows, Windows NT, and the

Windows logo are either registered trademarks or trademarks of Microsoft

Corporation in the United States and/or other countries.

WARRANTY

Tektronix warrants that the products that it manufactures and sells will be free from defects

in materials and workmanship for a period of one (1) year from the date of purchase from

an authorized Tektronix distributor. If any such product proves defective during this

warranty period, Tektronix, at its option, either will repair the defective product without

charge for parts and labor, or will provide a replacement in exchange for the defective

product. Batteries are excluded from this warranty.

In order to obtain service under this warranty, Customer must notify Tektronix of the

defect before the expiration of the warranty period and make suitable arrangements for the

performance of service. Customer shall be responsible for packaging and shipping the

defective product to the service center designated by Tektronix, shipping charges prepaid,

and with a copy of customer proof of purchase. Tektronix shall pay for the return of the

product to Customer if the shipment is to a location within the country in which the

Tektronix service center is located. Customer shall be responsible for paying all shipping

charges, duties, taxes, and any other charges for products returned to any other locations.

This warranty shall not apply to any defect, failure or damage caused by improper use or

improper or inadequate maintenance and care. Tektronix shall not be obligated to furnish

service under this warranty a) to repair damage resulting from attempts by personnel other

than Tektronix representatives to install, repair or service the product; b) to repair damage

resulting from improper use or connection to incompatible equipment; c) to repair any

damage or malfunction caused by the use of non-Tektronix supplies; or d) to service a

product that has been modified or integrated with other products when the effect of such

modification or integration increases the time or difficulty of servicing the product.

THIS WARRANTY IS GIVEN BY TEKTRONIX WITH RESPECT TO THE

LISTED PRODUCTS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR

IMPLIED. TEKTRONIX AND ITS VENDORS DISCLAIM ANY IMPLIED

WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE. TEKTRONIX’ RESPONSIBILITY TO REPAIR OR REPLACE

DEFECTIVE PRODUCTS IS THE SOLE AND EXCLUSIVE REMEDY

PROVIDED TO THE CUSTOMER FOR BREACH OF THIS WARRANTY.

TEKTRONIX AND ITS VENDORS WILL NOT BE LIABLE FOR ANY

INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES

IRRESPECTIVE OF WHETHER TEKTRONIX OR THE VENDOR HAS

ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.

AD007 User Manual

Table of Contents

List of Figures iv. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

List of Tables v. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

General Safety Summary vii. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Preface ix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Related Manuals and Information ix. . . . . . . . . . . . . . . . . . . . . . .

Contacting Tektronix x. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Service Programs x. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Getting Started 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Product Description 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Features 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Applications 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

WaveStar for Oscilloscopes 2. . . . . . . . . . . . . . . . . . . . . . . . .

Tektronix VISA and VISA Configuration Utility 2. . . . . . . .

System Requirements 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Network Protocols 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Accessories 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

External Features 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Power On Self Test 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Quick Setup 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Setting up a DHCP/BOOTP Server 8. . . . . . . . . . . . . . . . . . . . . .

Setting up DNS 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Installing the Adapter on the Network 10. . . . . . . . . . . . . . . . . . . .

Contacting the Network Administrator 10. . . . . . . . . . . . . . . .

A Note on Configuring the Network 12. . . . . . . . . . . . . . . . . .

Before You Proceed 13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Setup Procedure 1– Complete Factory Reset,

Set DHCP On 14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Setup Procedure 2– Stand-Alone Operation 15. . . . . . . . . . . .

Setup Procedure 3 – No DHCP Server, Static IP Setup

and Operation 18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Setup Procedure 4 – DHCP Server, Dynamic IP Setup

or Operation 21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Setup Procedure 5 – DHCP Server and Static IP 25. . . . . . . . .

Accessing the Web Page Interface 26. . . . . . . . . . . . . . . . . . . .

Password Protection 26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table of Contents

AD007 User Manual

Connecting the GPIB 27. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Installation Options 29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Installing the Software 29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Windows 95 30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Windows NT 4.0 30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

AD007 Install 30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Configuring VISA Resources 33. . . . . . . . . . . . . . . . . . . . . . . . . .

VISA Configuration Window 33. . . . . . . . . . . . . . . . . . . . . . .

Adding an AD007 as a Remote Host 35. . . . . . . . . . . . . . . . . .

Deleting a Remote Host 36. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Changing an AD007 37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Possible Errors 37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operating Basics 39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Home 40. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Adapter Information 41. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Adapter Password 41. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Reboot Adapter 41. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Network Setup 42. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Host Configuration 42. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Networking 42. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Name Service 43. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Time Protocol 43. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

GPIB Communications 44. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

GPIB Devices 44. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Talk/Listen 44. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Network Connections 44. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Printer Setup 45. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Printer Setup 45. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Print Status 46. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Statistics 47. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Network Statistics 47. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

GPIB Statistics 47. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

System Log 47. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Reset 47. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Help 48. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Support 48. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table of Contents

AD007 User Manual

iii

Reference 49. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Interpreting the Status Indicators 50. . . . . . . . . . . . . . . . . . . . . . . .

Power On 51. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Normal Operation 52. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Confirming a Hardware/Firmware Failure 53. . . . . . . . . . . . . . . .

Resetting the Adapter 54. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Bypass DHCP/BOOTP and Reset to Last Configuration 55. .

Reset the Password and Read the IP Address 56. . . . . . . . . . .

Reset to the Factory Defaults 57. . . . . . . . . . . . . . . . . . . . . . . .

Verifying Network Access to the Adapter 60. . . . . . . . . . . . . . . . .

Web Browser 60. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Network Ping 60. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Updating the AD007 Firmware 61. . . . . . . . . . . . . . . . . . . . . . . . .

Appendix A: Specifications 63. . . . . . . . . . . . . . . . . . . . . . . . . . .

Appendix B: Power Cord Options 67. . . . . . . . . . . . . . . . . . . . .

Appendix C: Network Protocols 69. . . . . . . . . . . . . . . . . . . . . . .

Appendix D: Troubleshooting 71. . . . . . . . . . . . . . . . . . . . . . . . .

Power On and Status 71. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Network and Print Configuration 73. . . . . . . . . . . . . . . . . . . . . . .

GPIB 75. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Glossary 77. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Index 81. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table of Contents

AD007 User Manual

List of Figures

Figure 1: AD007 GPIB-LAN Adapter, RJ-45 cable, and power

supply 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Figure 2: External features 5. . . . . . . . . . . . . . . . . . . . . . . . . . .

Figure 3: Location of Status Indicators 6. . . . . . . . . . . . . . . . .

Figure 4: Network information card 10. . . . . . . . . . . . . . . . . . .

Figure 5: Ethernet hardware address 11. . . . . . . . . . . . . . . . . .

Figure 6: Decoding the adapter IP address 23. . . . . . . . . . . . . .

Figure 7: Typical GPIB Network Configuration 27. . . . . . . . .

Figure 8: Connecting to the GPIB 28. . . . . . . . . . . . . . . . . . . . .

Figure 9: VISA Configuration WIndow 33. . . . . . . . . . . . . . . .

Figure 10: Add Remote Host 35. . . . . . . . . . . . . . . . . . . . . . . . .

Figure 11: Delete Remote Resource 36. . . . . . . . . . . . . . . . . . . .

Figure 12: AD007 GPIB-LAN Adapter home page 40. . . . . . .

Figure 13: Status Indicators 50. . . . . . . . . . . . . . . . . . . . . . . . . .

Figure 14: RESET button 54. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table of Contents

AD007 User Manual

List of Tables

Table 1: Power on Self Test 6. . . . . . . . . . . . . . . . . . . . . . . . . .

Table 2: AD007 status indicators for power on 51. . . . . . . . . .

Table 3: AD007 status indicators during normal operation 52

Table 4: Using the RESET button 55. . . . . . . . . . . . . . . . . . . . .

Table 5: Binary -to-decimal conversion chart for

IP address 56. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table 6: Factory default settings 58. . . . . . . . . . . . . . . . . . . . . .

Table 7: General specifications 63. . . . . . . . . . . . . . . . . . . . . . .

Table 8: AD007 certifications and compliances 63. . . . . . . . . .

Table 9: Power supply certifications and compliances 65. . . .

Table 10: Power cord identification 67. . . . . . . . . . . . . . . . . . .

Table 11: IP and Ethernet protocols 69. . . . . . . . . . . . . . . . . . .

Table 12: Power on and status problems 71. . . . . . . . . . . . . . .

Table 13: Network and print problems 73. . . . . . . . . . . . . . . . .

Table 14: GPIB problems 75. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table of Contents

AD007 User Manual

vii

General Safety Summary

Review the following safety precautions to avoid injury and prevent

damage to this product or any products connected to it. To avoid

potential hazards, use this product only as specified.

Only qualified personnel should perform service procedures.

To Avoid Fire or Personal Injury

Observe All Terminal Ratings. To avoid fire or shock hazard, observe all

ratings and markings on the product. Consult the product manual for

further ratings information before making connections to the product.

Use Proper AC Adapter. Use only the AC adapter specified for this

product.

Do Not Operate Without Covers. Do not operate this product with

covers or panels removed.

Avoid Exposed Circuitry. Do not touch exposed connections and

components when power is present.

Do Not Operate With Suspected Failures. If you suspect there is damage

to this product, have it inspected by qualified service personnel.

Do Not Operate in Wet/Damp Conditions.

Do Not Operate in an Explosive Atmosphere.

Keep Product Surfaces Clean and Dry.

General Safety Summary

viii

AD007 User Manual

Safety Terms and Symbols

Terms in This Manual. These terms may appear in this manual:

WARNING. Warning statements identify conditions or practices that

could result in injury or loss of life.

CAUTION. Caution statements identify conditions or practices that

could result in damage to this product or other property.

Terms on the Product. These terms may appear on the product:

DANGER indicates an injury hazard immediately accessible as you

read the marking.

WARNING indicates an injury hazard not immediately accessible as

you read the marking.

CAUTION indicates a hazard to property including the product.

Symbols on the Product. These symbols may appear on the product:

CAUTION

Refer to Manual

Double

Insulated

Protective Ground

(Earth) Terminal

Not suitable for

connection to

the public telecom-

munications network

AD007 User Manual

Preface

This manual contains information about installing and configuring

the AD007 GPIB-LAN Adapter.

H Getting Started describes the AD007 adapter and how to install

the adapter on 10Base-T Ethernet.

H Operating Basics contains information on how to use the web

pages in the adapter to monitor, reconfigure, or test the flow of

communications through the adapter, and how to set up a network

printer.

H Reference provides special diagnostic and setup procedures.

H Appendices contains specifications, applicable network protocols,

and troubleshooting information.

H A Glossary and Index appear at the end of the manual.

Related Manuals and Information

Refer to the following manuals for information regarding related

products, manuals, and programming specifications.

H The Read This First guide (071-0246-XX) contains information

to give to your network administrator for setting up the adapter

on the network.

H This user manual (071-0245-XX) is in Acrobat format on the CD

ROM.

H The WaveStar User Manual (071-0220-XX) is in Acrobat format

on the CD ROM.

General information and specifications for Virtual Instrument

Software Architecture (VISA), is available from the web site of the

VXIplug&play Systems Alliance at:

http://www.vxipnp.org

Preface

AD007 User Manual

The following documents relate to the development of the VISA

used by the AD007 adapter:

H VISA Software Design Specification

H VPP-4.3: The VISA Library Revision 2.0

Contacting Tektronix

Product

Support

For questions about using Tektronix measurement

products, call toll free in North America:

1-800-TEK-WIDE (1-800-835-9433 ext. 2400)

6:00 a.m. – 5:00 p.m. Pacific time

Or contact us by e-mail:

[email protected]

For product support outside of North America,

contact your local Tektronix distributor or sales

office.

Service

Support

Tektronix offers extended warranty and calibration

programs as options on many products. Contact

your local Tektronix distributor or sales office.

For a listing of worldwide service centers, visit our

web site.

For other

information

In North America:

1-800-TEK-WIDE (1-800-835-9433)

An operator will direct your call.

To write us

Website

Tektronix, Inc.

P.O. Box 1000

Wilsonville, OR 97070-1000

USA

Tektronix.com

AD007 User Manual

Getting Started

This section contains an overview of the AD007 GPIB-LAN Adapter

and provides instructions on how to install the adapter and the

accompanying software.

Product Description

The AD007 adapter allows GPIB devices to talk or listen to

networked computers and peripherals through a 10Base-T Ethernet

connection.

Features

H GPIB (IEEE 488.2) and 10Base-T Ethernet (IEEE 802.3)

compatible

H Easy setup with DHCP/BOOTP server

H LED status indicators for power, LAN, and GPIB connections

H Web page interface for configuration and statistics

H Virtual Instrument Software Architecture (VISA) software with

language interface libraries for programmers using Microsoft

Visual Basic or Microsoft Visual C/C++

H Configuration utility for setting up additional VISA resources

H Software installation allowed on any number of PCs

H Free firmware updates over the Internet with the AD007 Update

Utility

Applications

H Print directly from GPIB devices to a network printer

H Control up to 14 GPIB devices over an Ethernet connection

H Capture waveforms with optional WaveStar for Oscilloscopes

software from Tektronix

Getting Started

AD007 User Manual

WaveStar for Oscilloscopes

The AD007 adapter together with the optional WaveStar for

Oscilloscopes software provides a complete solution for users with

Tektronix TDS Series oscilloscopes. The software provides a

powerful, easy-to-use interface for controlling instruments,

displaying data and waveforms, and sending print jobs to any local or

network printer. (A network PC running Windows 95 or

Windows NT 4.0 is required.)

A free 30-day demo of WaveStar for Oscilloscopes is included on the

installation CD.

Tektronix VISA and VISA Configuration Utility

The VISA standard, developed by the VXIplug&play Systems

Alliance, provides a common Input/Output (I/O) library for software

developers so that software from different vendors can run on the

same platform.

Except for direct GPIB-to-network printing, all applications that

communicate over the network to the AD007 adapter must use the

Tektronix version of VISA that installs with the software for the

AD007 adapter. For example, Tektronix WaveStar for Oscilloscopes

must use the VISA that installs with the AD007 software.

The software installation for the AD007 GPIB-LAN Adapter

includes a utility to help you configure the Virtual Instrument

Software Architecture (VISA) resources. The VISA configuration

utility allows you to add or remove remote hosts (such as one or

more AD007 adapters) along and their associated GPIB interfaces.

For more information about using the configuration utility, see

page 33.

Getting Started

AD007 User Manual

System Requirements

The AD007 adapter requires the following system components for

installation and operation.

H PC with Windows 95 or Windows NT 4.0

H CD ROM drive

H Web browser

H 10BaseT Ethernet card

H 10BaseT LAN connection

H LPD-compatible print server for network printing

Network Protocols

Firmware in the AD007 adapter supports the following network

protocols:

H BOOTP

H DHCP

H LPD

H DNS

H HTTP

H FTP

H Time Protocol

Getting Started

AD007 User Manual

Accessories

Figure 1 shows the AD007 GPIB-LAN Adapter, RJ-45 UTP cable,

and universal power supply (100 – 240 VAC). Use the part numbers

when ordering replacements.

Universal

power supply

(119-5883-00)

RJ-45 cable

(174-4024-00)

Figure 1: AD007 GPIB-LAN Adapter, RJ-45 cable, and power supply

Also included (but not shown) are the following accessories:

H Power cord (varies with power cord option, see Table 10 on

page 67)

H GPIB connector hardware (129-1502-00)

H CD ROM

H AD007 Read This First instructions

H AD007 User Manual (071-0245-XX)

H Registration form and mailing envelopes

Getting Started

AD007 User Manual

External Features

Figure 2 shows the external features of the AD007 GPIB-LAN

Adapter

DC jack

RJ-45 port

Status indicators

GPIB connector

Figure 2: External features

Power On Self Test

NOTE. Do not connect the adapter to the network or GPIB at this

time.

1. Connect the power supply to the DC jack of the AD007 adapter.

2. Plug the power supply into a 100 to 240 VAC (± 10%) power

source with the appropriate line cord.

3. During the 30-second power on routine which follows, the status

indicators blink amber to indicate a self test in progress.

Page is loading ...

Tektronix AD007 User manual

Brand: Tektronix

Model: AD007

Category: Networking

Type: User manual

Download PDF

report

Tektronix AD007 User manual

Tektronix AD007 User manual

Related papers

Other documents