ISSUED: 12-27-01 SHEET #: 055-9073-5 03-09-05
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
1 of 1
IMPORTANT! Read entire instruction sheet
before you start installation and assembly.
Installation and Assembly - Projector Adapter Plate for
Sharp
™
model PG-M15X and Net TV LCD Projectors
Models: PAP 121, PAP 121-S,
PAP 121-W
Before you start check the parts list below to
make sure all of the parts shown are included.
Description
AA adapter plate
BB 1/4
- 20 x 3/8" socket pin screw
CC M3 -.5 x 25 mm thumb screw
DD 4 mm allen wrench
EE retaining spacer
FF spacer
GG M3 - .5" x 6 mm phillips pan
Parts List
Qty.
1
1
1
1
1
1
1
PAP 121
055-1207
520-1109
560-1139
560-9646
590-1128
590-0108
520-1028
Note: Actual parts may appear slightly different than illustrated.
DD
AA
EE
BB
Flip projector upside-down and attach adapter
plate (AA) using one socket pin screw (BB) and
one phillips screw (GG) as shown. Tighten screw
(BB) using 4 mm allen wrench (DD).
*Notch indicates front of projector.
Secure adapter plate with thumb screw (CC),
spacer (FF) and retaining spacer (EE) in remaining
hole.
EE
CC
*
AA
BB
GG
GG
FF
FF
PAP 121-S
055-4207
520-2109
560-7139
560-9646
590-2128
590-0108
520-2036
© 2005 Peerless Industries, Inc. All rights reserved.
Peerless is a trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners
• Installer must verify that the ceiling will safely support
four times the combined weight of all attached equip-
ment and hardware.
WARNING
CC
PAP 121-W
055-2207
520-2109
560-7139
560-9646
590-2128
590-0108
520-2036