Promaster Wireless Remote Shutter Release Owner's manual

Brand: Promaster

Model: Wireless Remote Shutter Release

Type: Owner's manual

Promaster Wireless Remote Shutter Release provides photographers with a convenient and versatile tool for capturing compelling close-ups from a distance. With a range of up to 30 meters (99 feet), it enables photographers to adjust camera settings and trigger the shutter remotely, enhancing the safety and precision of their shots. The device is powered by easily replaceable batteries and offers multiple release modes, including instant, delayed, and bulb, catering to various photography scenarios.

Please read these operating instructions carefully before using the ProMaster Wireless

Remote Shutter Release.

Package Contains:

 Transmitter x1

 Receiver x1

 CR-2 battery x1

 23A battery x1

 Connecting cord x1

 English Instruction x1

Transmitter

Receiver

CR-2 Lithium battery

23A battery

Connecting cord

Hot Shoe Converter

(For SONY/ MINOLTA model only)

Parts of Transmitter and Receiver.

1 - Battery Cover

2 - Power Switch

3 - Shutter Button

4 - Status LED

5 - Remote Socket

1 - Status LED

2 - Shutter Button

3 - Mode Switch

Replacing batteries:

The receiver is powered by one CR-2

battery and the transmitter is powered by

one 23A battery. These are included with

your remote.

1 - Remove the battery cover at the back of

remote controls.

2 - Insert a fresh battery. Please ensure the

batteries are inserted in the correct

direction.

3 - Close the battery cover.

Setting the Channel Code:

Please make sure the receiver and the

transmitter are set to the same channel

code.

There are 16 codes available.

The ProMaster Wireless Remote is designed for most of DSLR and SLR cameras that

have a remote socket on the camera body. It allows you to easily create compelling

close-ups from a safe and secure "line-of-sight" distance of up to 30 meters (99’ feet). The

receiver simply attaches to a compatible camera's accessory shoe and connects to the

camera's remote socket with the supplied receiver cable. The receiver is powered by one

CR-2 lithium battery and the transmitter is powered by one 23A battery.

Features:

Receiver:

• Battery Type: 1 x CR-2 lithium battery

• Operating temperature: 5° C to 400° C (40° F to 105° F)

• Net Weight Approximately: 19g

• Dimensions: 47.5 X 38.0 X 21.9mm

Transmitter:

• Battery Type: 1 x 23A battery

• Operating temperature: 5° C to 40° C (40° F to 105° F)

• Net Weight Approximately: 18g

• Dimensions: 81.90 X 27.3 X 14.5mm

Operating Instructions:

1. Turn OFF the power switch on the camera before inserting the connecting cord from

the remote into the camera’s remote socket.

2. Please make sure the transmitter and receiver are the same code setting.

3. Plug the connecting cord into the receiver remote socket and the camera remote

socket.

4. Turn ON the power of the receiver and the camera.

5. Select Instant / Delay / Bulb release modes

 For delayed release, set the mode switch of the transmitter to 3S. When you

press the shutter button, the camera will take a picture after a 3-second delay.

 For instant release, set the mode switch to 0S. When you press the shutter button,

the camera will take a picture instantly.

 For Bulb mode, set the mode switch to 0S. Press the shutter button of the

transmitter for 5 seconds, the receiver will lock the shutter for BULB. To release

the shutter lock, press the shutter button of the transmitter again, the receiver will

unlock the shutter.

 To focus, press the shutter button of transmitter half way.

IMPORTANT NOTE: Some camera and lens combinations take longer to achieve focus lock.

Your camera may not trigger until focus lock has been achieved. If the remote fails to trigger

your camera, it is likely that it is due to the fact that your camera has not achieved focus lock

when the trigger signal is received. Switching the remote to the 3S delay mode will give your

camera more time to focus and help the remote to trigger your camera reliably.

ONE YEAR UNCONDITIONAL GUARANTEE

If for any reason, your ProMaster product fails within ONE YEAR of the date of purchase,

return the product to your ProMaster dealer and it will be exchanged for you at no charge.

ProMaster products are guaranteed for ONE FULL YEAR against defects in workmanship

and materials. If at any time after one year, your ProMaster product fails under normal use,

we invite you to return it to ProMaster for evaluation and repair.

Made in China

www.promaster.com

Fairfield, CT 06825

Promaster Wireless Remote Shutter Release Owner's manual

Promaster Wireless Remote Shutter Release Owner's manual

Promaster Wireless Remote Shutter Release Owner's manual

Related papers

Other documents