ZALMAN zm-wb4 gold water cooling cpu block User manual

Please visit our website and watch the ZM-WB4 Gold installation video for easy installation.

 Please read this manual thoroughly before installation.

 The specifications of this product and its components may change without prior notice to

improve performance.

http://www.zalman.co.kr http://www.zalmanusa.com

ZM-WB4 Gold

(English Version)

CPU WATER BLOCK

for Higher Water Cooling Performance





1

1) Test the product for leakage away from the system before installing it on the system. confirming no leakage,

proceed with the installation and use.

2) Use approved coolant for computer water-cooling to prevent corrosion.

3) Use coolant tubes listed under the compatibility list.

4) Do not use the product if it interferes with any motherboard components.

5) Familiarize yourself with this manual.

6) Keep this product and its associated system away from children.

Precautions

1) Weight : 135g

2) Materials : Pure Copper (Water Block Base) and Polyester (Water Block Cover)

3) Dimensions : 63(W) x 63(L) x 16.5(H)mm

4) Compatible Tubes (Outer x Inner) : 14x10mm, 13x10mm, 13x9mm, 12x9mm, 12x8mm, 11x8mm, 10x8mm

2. Specifications

1) Zalman’s creative dimple-type processing technology allows lightness in weight and excellent cooling performance.

2) Pure copper-base material water block provides excellent heat transfer, and gold-plated base prevents corrosion.

3) Use of transparent and strengthened plastic water block cover allows lightness in weight, excellent durability,

and view for the user to be able to check the flow of internal coolant.

4) Connection fitting for the hose is a single-body cover in the form of two connection structure types, which allows

for various types of hoses to be used.

5) Compatible with Intel Pentium 4 (Socket 775/478) and AMD (Socket AM2/754/939/940).

Zalman Tech Co., Ltd. is not responsible for any damages due to external causes, including but not limited

to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper installation,

or improper testing.

1. Features

Disclaimer





2

3. Exploded View

Bolt

Water Block Assembly

Fixing Bolt for Clip Support

Clip Support for Socket 775

Clip Support for Socket 478

Backplate for Socket 775

Clip Bolt

Clip for Intel

Retention Guide

Clip for AMD

ZM-WB4 Gold

Retention Guide for AMD

 





Tube Clamp B (11.5 X 8mm):13x9mm, 12x9mm, 12x8mm, 11x8mm, 10x8mm

Tube Clamp A (13.8 X 8mm): 14x10mm, 13x10mm







3

4. Components

1) Common Components

 CPU Water Block Assembly

 Two(2) Clips

 Four(3) Bolts

 Three(3) Clip Bolts

 Thermal Grease

 Two(2) Tube Clamps A (13.8 X 8mm )

 Two(2) Tube Clamps B (11.5 X 8mm )

 Paper Washer

 User’s Manual

2) Components for Intel Pentium 4 (Socket 775)

 Clip Support for Socket 775

 Backplate for Socket 775

 Four(4) Fixing Bolts for Clip Support

3) Components for Intel Pentium 4 (Socket 478)

 Two(2) Clip Supports for Socket 478

4) Components for AMD (Socket AM2/754/939/940)

 Clip for AMD

󰣨

󰣩󰣪

󰣢

󰣣

󰣤

󰣥

󰣦

󰣧

󰣮

󰣯

󰣭󰣫󰣬





4

5. Installation

1) Intel Pentium 4 -775



Install Clip Supports for Socket 775

Align the clip support for socket 775 and the backplate for socket 775 with the mounting holes on the motherboard and

fasten them together using the clip support fixing bolt. The lever slot on the clip support should be properly oriented

on the hinged side of the socket lever when installing.



Install Clip

Align the Clip’s holes with the Waterblock tabs as shown in

the diagram, and install the Clips by slowly screwing the Clip

Bolts into the Clip holes. Hold the Clips with one hand, and

install with slight hand motions for easy installation.



Apply Thermal Grease

Clean the contact surface of the CPU completely.

Apply Thermal Grease on the CPU surface that makes

contact with the base of the Water Block.



Install CPU Water Block

Set the CPU Water Block at the center of the CPU.

Screw the Bolts in slightly, then tighten each Bolt a few

turns at a time while alternating between the two until the

Clips are completely pressed against the Clip Support.

CPUCPUCPU

Clip Support Fixing Bolt

Clip Support for Socket 775

Motherboard

Backplate for Socket 775

Socket Lever

Lever Slot

Socket Lever

Clip

Clip Bolt

Thermal Grease





5

2) Intel Pentium 4 -478



Install the Clip Supports for Socket 478

Install the Clip Supports for Socket 478 on

both sides of the Retention Guide as shown

in the diagram on the right.



Install Clip

Align the Clips’ holes with the Waterblock tabs as

shown in the diagram, and install the Clips by

slowly screwing the Clip Bolts into the Clip holes.

Hold the Clips with one hand, and install with

slight hand motions for easy installation.

Note 1) Make sure that the outlet is installed in a

manner so that the outlet is placed above

the inlet as shown in the picture.

Retention Guide

Clip Support for Socket 478

Clip

Clip Bolt

Outlet

Inlet

Motherboard





6

3) AMD - AM2/754/939/940



Install CPU Water Block

Set the CPU Water Block at the center of the

CPU. Hook the Clip’s slot into the center lug of

Clip support, then hook the lever’s slot into the

other center lug.



Apply Thermal Grease

Clean the contact surface of the CPU

completely. Apply Thermal Grease on the CPU

surface that makes contact with the base of

the Water Block.

Center Lug

Lever’s Slot

Thermal Grease

Lever



Install CPU Water Block

Set the CPU Water Block at the center of the

CPU. Screw the Bolts in slightly, then tighten

each Bolt a few turns at a time while alternating

between the two until the Clips are completely

pressed against the Clip Support.



Apply Thermal Grease

Clean the contact surface of the CPU

completely. Apply Thermal Grease on the CPU

surface that makes contact with the base of

the Water Block.

Thermal Grease

Clip’s Slot

Center Lug





7

Stable performance and noiseless liquid cooling system can both be achieved with the use of

Zalman’s Noiseless Power Supply, Heatpipe Hard Disk Cooler, Noiseless Case Fan and Northbridge

Water Block.

Zalman Noise Prevention System

TNN(Totally No Noise) Computer Case

Home Theatre PC Enclosures

TNN Computer Enclosures are the world’s first environment-friendly noiseless computer enclosures

that operate without the use of a fan. TNN Computer Enclosures use the aluminum enclosure itself

as a heatsink. They are ideal for environments that require silence, as well as for home theatre

systems and multi-media systems.

The HD160 is designed for ultra quiet home theatre

PC operation, utilizing optimized ventilation and

anti-vibration reinforcements, making it ideal for

environments that require silence such as living

rooms, bedrooms, educational facilities, and offices.

For more information, please visit our website.

HD160

TNN 300 TNN 500AF

Noiseless Power Supply Heatpipe HDD Cooler Noiseless Case Fan Northbridge Water Block

ZALMAN zm-wb4 gold water cooling cpu block User manual

This manual is also suitable for

ZALMAN zm-wb4 gold water cooling cpu block User manual

Related papers

Other documents