5 6
SPEED SELECT BUTTON
first turn on your Cloud Rider™ HD 2.0 is the SLOW speed mode. To increase the speed simply push the
Speed setting button.
™ HD 2.0 has changed to MEDIUM speed mode. To increase the speed again simply push the Speed
Cloud Rider™ HD 2.0 has
indicating your Cloud Rider™ HD 2.0 speed changed back to SLOW speed mode.
RECOGNIZING THE FRONT & REAR OF THE CLOUD RIDER™ HD 2.0
STARTING / STOPPING THE ROTORS
FRONT
E
REAR
Even though the Cloud Rider™ HD 2.0 has four rotors
Quadrocopter displays WHITE LED lights and the rear of
activated (see diagram E).
AUTO START/LAND
The Cloud Rider™
AUTO START / LAND button on the top of the controller and your
Cloud Rider™
NOTE:
to avoid obstacles.
MANUAL START / STOP
both sticks to the neutral position and push the throttle up to take off.
Note:You can start/stop your Cloud Rider™ HD 2.0 manually or automatically.
Please follow one of the steps below to operate accordingly. Make sure you
have properly synced the Cloud Rider™ HD 2.0 and the power stays on.
UNDERSTANDING THE ALTITUDE LOCK SENSOR
throttle.
Note: The altitude sensor does have some tolerance based on atmospheric conditions and could have a slight
variation in altitude.
F
G
H
3 CHANNEL FLIGHT CONTROL
While learning to fly your Cloud Rider™ HD 2.0 it is best to start in a large space until you get used to the
basic controls. As you master flying your Cloud Rider™ HD 2.0 you can move to more advanced
to the next level.
Move the Throttle stick up to increase the
propeller speed and the Cloud Rider™ HD 2.0
accelerate and ascend.
propeller speed and the Cloud Rider™ HD 2.0
decelerate and descend (see diagram F).
the Cloud Rider™ HD 2.0
Cloud
Rider™ HD 2.0
(see diagram G).
and the Cloud Rider™ HD 2.0
Move the Direction Control right and the Cloud
Rider™ HD 2.0
(see diagram H).
3 CHANNEL VS 4 CHANNEL FLYING
Cloud Rider™ HD 2.0’s default setting is 4 Channel mode.
To change to 3 Channel mode:
indicating the
Cloud Rider™ HD 2.0
To change back to 4 Channel mode:
indicating the
Cloud Rider™ HD 2.0