Botex SDC-24 DMX Desk User manual

Category
Stroboscopes & disco lights
Type
User manual

Botex SDC-24 DMX Desk: Control your lights with precision and ease. Tailor-made for beginners and professionals alike, this user-friendly controller boasts 24 channel faders for individual control, 2 displays for clear channel value monitoring, and start address selection via DIP switches. Link up to 4 desks for expanded 96-channel control. Ideal for testing DMX devices or basic lighting applications, the Botex SDC-24 DMX Desk comes with 16 colored fader caps for added convenience.

Botex SDC-24 DMX Desk: Control your lights with precision and ease. Tailor-made for beginners and professionals alike, this user-friendly controller boasts 24 channel faders for individual control, 2 displays for clear channel value monitoring, and start address selection via DIP switches. Link up to 4 desks for expanded 96-channel control. Ideal for testing DMX devices or basic lighting applications, the Botex SDC-24 DMX Desk comes with 16 colored fader caps for added convenience.

SDC-24 DMX Desk
DMX controller
User manual
Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: +49 (0) 9546 9223-0
Internet: www.thomann.de
28.06.2019, ID: 457482
Table of contents
1 General information................................................................................................................................. 5
1.1 Further information........................................................................................................................... 6
1.2 Notational conventions.................................................................................................................... 7
1.3 Symbols and signal words............................................................................................................... 7
2 Safety instructions..................................................................................................................................... 9
3 Features....................................................................................................................................................... 14
4 Starting up.................................................................................................................................................. 15
5 Connections and controls................................................................................................................... 17
6 Technical specications....................................................................................................................... 22
7 Plug and connection assignment.................................................................................................... 24
8 Protecting the environment.............................................................................................................. 25
Table of contents
SDC-24 DMX Desk
3
DMX controller
4
SDC-24 DMX Desk
DMX controller
1 General information
This manual contains important instructions for the safe operation of the unit. Read and follow
the safety instructions and all other instructions. Keep the manual for future reference. Make
sure that it is available to all those using the device. If you sell the unit please make sure that
the buyer also receives this manual.
Our products are subject to a process of continuous development. Thus, they are subject to
change.
General information
SDC-24 DMX Desk
5
DMX controller
1.1 Further information
On our website (www.thomann.de) you will nd lots of further information and details on the
following points:
Download This manual is also available as PDF le for you to download.
Keyword search
Use the search function in the electronic version to nd the topics of
interest for you quickly.
Online guides
Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service
If you have any problems with the device the customer service will
gladly assist you.
General information
6
SDC-24 DMX Desk
DMX controller
1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
1.3 Symbols and signal words
In this section you will nd an overview of the meaning of symbols and signal words that are
used in this manual.
Letterings
General information
SDC-24 DMX Desk
7
DMX controller
Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – danger zone.
General information
8
SDC-24 DMX Desk
DMX controller
2 Safety instructions
This device is used to control spotlights, dimmers, lighting eects equipment or other DMX-
controlled devices. Use the device only as described in this user manual. Any other use or use
under other operating conditions is considered to be improper and may result in personal
injury or property damage. No liability will be assumed for damages resulting from improper
use.
This device may be used only by persons with sucient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Intended use
Safety instructions
SDC-24 DMX Desk
9
DMX controller
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
NOTICE!
Risk of re
Do not block areas of ventilation. Do not install the device near any direct heat
source. Keep the device away from naked ames.
Safety
Safety instructions
10
SDC-24 DMX Desk
DMX controller
NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
Only operate the device within the ambient conditions specied in the chapter
‘Technical specications’ of this user manual. Avoid heavy temperature uctua‐
tions and do not switch the device on immediately after it was exposed to tem‐
perature uctuations (for example after transport at low outside temperatures).
Dust and dirt inside can damage the unit. When operated in harmful ambient
conditions (dust, smoke, nicotine, fog, etc.), the unit should be maintained by
qualied service personnel at regular intervals to prevent overheating and other
malfunction.
Safety instructions
SDC-24 DMX Desk
11
DMX controller
NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches
the voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or re.
NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly react
with the coating of your parquet, linoleum, laminate or PVC oor and after some
time cause permanent dark stains.
In case of doubt, do not put the rubber feet directly on the oor, but use felt-pad
oor protectors or a carpet.
Safety instructions
12
SDC-24 DMX Desk
DMX controller
NOTICE!
Possible damage due to installation of a wrong fuse
The use of dierent types of fuses can cause serious damage to the unit. Fire
hazard!
Only fuses of the same type may be used.
Safety instructions
SDC-24 DMX Desk
13
DMX controller
3 Features
Special features of the device:
n 24 channel faders
n 2 displays to display channel values
n Start address selectable via DIP switches
n Linking of up to 4 desks to control up to 96 channels
n Simple operation
n Ideal for testing DMX devices or simple applications
n 16 coloured fader caps included
Features
14
SDC-24 DMX Desk
DMX controller
4 Starting up
Unpack and carefully check that there is no transportation damage before using the unit. Keep
the equipment packaging. To fully protect the device against vibration, dust and moisture
during transportation or storage use the original packaging or your own packaging material
suitable for transport or storage, respectively.
Create all connections while the device is o. Use the shortest possible high-quality cables for
all connections. Take care when running the cables to prevent tripping hazards.
NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not use ordi‐
nary microphone cables.
Never connect the DMX input or output to audio devices such as mixers or ampli‐
ers.
Starting up
SDC-24 DMX Desk
15
DMX controller
Connect the DMX input of the device to the DMX output of a DMX controller or another DMX
device. Connect the output of the rst DMX device to the input of the second one, and so on
to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain
is terminated with a resistor (110 Ω, ¼ W).
Connections in DMX mode
Starting up
16
SDC-24 DMX Desk
DMX controller
5 Connections and controls
Front panel
Connections and controls
SDC-24 DMX Desk
17
DMX controller
1 Channel faders [1][24]
Individual control of up to 24 DMX channels
2 [CH]
Display of the values set with the faders
3 [DMX]
Display of assigned DMX channels
Connections and controls
18
SDC-24 DMX Desk
DMX controller
Rear panel
Connections and controls
SDC-24 DMX Desk
19
DMX controller
4 DIP switch for setting the DMX address
0: DIP switch is in ‘[OFF]’ position. 1: DIP switch is in ‘[ON]’ position.
The value of the DIP switches 1-9 is binary coded. DIP switch 10 is without function. To set the desired DMX address, set
the DIP switches so that the sum of the resulting numbers yields the desired DMX address. Please orient yourself by the
following table:
1 2 3 4 5 6 7 8 9 DMX address
1 0 0 0 0 0 0 0 0 1
0 1 0 0 0 0 0 0 0 2
0 0 1 0 0 0 0 0 0 4
0 0 0 1 0 0 0 0 0 8
0 0 0 0 1 0 0 0 0 16
0 0 0 0 0 1 0 0 0 32
0 0 0 0 0 0 1 0 0 64
0 0 0 0 0 0 0 1 0 128
0 0 0 0 0 0 0 0 1 256
Connections and controls
20
SDC-24 DMX Desk
DMX controller
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28

Botex SDC-24 DMX Desk User manual

Category
Stroboscopes & disco lights
Type
User manual

Botex SDC-24 DMX Desk: Control your lights with precision and ease. Tailor-made for beginners and professionals alike, this user-friendly controller boasts 24 channel faders for individual control, 2 displays for clear channel value monitoring, and start address selection via DIP switches. Link up to 4 desks for expanded 96-channel control. Ideal for testing DMX devices or basic lighting applications, the Botex SDC-24 DMX Desk comes with 16 colored fader caps for added convenience.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI