Agria 3656 Owner's manual

Brand: Agria

Model: 3656

Type: Owner's manual

Page is loading ...

998 906 08.00 agria type 3656 511 agria-Werke GmbH  D-74215 Möckmühl  Tel. 06298/39-0  Telefax 06298/38111  e-mail: [email protected]  Internet: http://www.agria.de 3

Before starting the engine, read the op-

erating instructions and note:

Warning

This symbol marks all paragraphs in

these operating instructions which con-

cern your safety. Pass all safety instruc-

tions to other users and operators.

Also read and observe the safety

regulations in the operating instruc-

tions for the base machine.

Due Use

The shrub clearing machine has exclu-

sively been designed for mowing/cutting

of grass, similar plants, undergrowth or

wood-like vegetation in forestry and grass

and park maintenance (due use).

Any other type of operation is considered

undue. The manufacturer is not liable for

any damage resulting from undue use,

for which the risk lies with the user alone.

Due use includes compliance with manu-

facturers instructions on operation, main-

tenance and repair.

Any unauthorized changes to the shrub

clearing machine render manufacturer

liability null and void.

General Instructions on

Safety and Accident

Prevention

Basic Rule:

The standard accident prevention regu-

lations must be adhered to, as well as all

other generally accepted rules govern-

ing operational safety, occupational

health and road traffic regulations.

For drives on public roads, the latest traf-

fic code applies.

Accordingly, check the shrub clearing

machine for road and operational safety

each time you take up operation.

Only persons familiar with the shrub

clearing machine and instructed on the

hazards of operation are allowed to use,

maintain and repair the shrub clearing

machine.

Young persons of 16 years or younger

are not permitted to operate the shrub

clearing machine!

Only work in good light and visibility.

Operators clothes should fit tightly. Avoid

wearing loosely fitting clothes. Wear solid

shoes.

Note the warning and instruction signs

on the shrub clearing machine for safe

operation. Compliance is for your own

safety.

When transporting the shrub clearing

machine on vehicles or trailers outside

the area to be cultivated, ensure that the

engine is shut off.

Careful with rotating tools  keep at a safe

distance!

Due to its centrifgual mass, the sickle

knife can follow up. During that time, do

not stay too close to the mower housing.

Only when the sickle knife is completely

standing still and the spark plug connec-

tor has been withdrawn, works on the

mower are permitted.

Foreign powered parts shear and

squeeze!

Riding on the attachment during opera-

tion is not permitted.

Implements and weights influence the

driving, steering, braking, and tip-over

characteristics of the shrub clearing ma-

chine. Therefore, ensure steering and

braking functions are sufficient. Match

operating speed to conditions.

Do not change settings of governor. High

engine speed increases risk of accidents.

Working Area and Danger

Zone

The user is liable to third parties working

within the shrub clearing machines work-

ing range.

Staying in the danger zone is not permit-

ted.

Safety Area

Prior to mowing, establish a safety area

around the terrain to be mowed with a

distance of at least 50 m.

The warnings must indicate that it is pro-

hibited to enter this area.

If the operator should notice that a per-

son or animal is staying within this area,

the machine must be shut down without

delay and must not be operated again

before the safety area is free again.

Check the immediate surroundings of the

machine before you start it. Watch out

for children and animals.

Before you start work, clear the area from

any foreign object. During operation, al-

ways watch out for further objects and

remove them in time.

For operation in enclosed areas, ensure

that a safety distance is kept to enclo-

sures to prevent damage to tools.

Be careful when mowing; ensure that the

sickle knife does not seize obstacles

such as border stones, enclosures, roots

etc.

Operation and Safety Devices

Before You Start the Engine

Become familiar with the devices and

operating elements and their functions.

Above all, learn how to shut off the en-

gine quickly and safely in an emergency

situation.

Ensure that all protective devices are

mounted and positioned to provide pro-

tection.

Starting the Engine

Do not start engine in closed rooms. The

carbon monoxide contained in the ex-

haust fume is extremely toxic when in-

haled.

Before you start the engine set all oper-

ating elements to neutral or idling posi-

tion.

Be careful upon starting and during

mowing; do not come directly close

to the shrub clearing machine with

your hands or feet.

When starting, it is not permitted to bring

the shrub clearing machine into an up-

right position or to tilt it.

For starting the engine, do not step in

front of the shrub clearing machine and

the implement.

Operation

Never leave the operators position at the

steering handle while shrub clearing

machine is at work.

Never adjust the operating handles dur-

ing work  danger!

For all works with the shrub clearing ma-

chine, in particular for turning, the ma-

chine operator must keep the distance

to the machine given by the steering

handles.

Riding on the implement during operation

or in transport is not permitted.

If clogging occurs in the implement or in

the mower, shut off the engine and clean

the implement or the mower with an ap-

propriate tool.

In case of damage to the shrub clearing

machine, immediately shut off the engine

and have it repaired.

If steering causes problems, immediately

bring the shrub clearing machine to a halt

and shut it off. Have the malfunction

eliminated without delay.

If on a slope there is the risk of slipping

down, it is not allowed to work with the

shrub clearing machine.

Working on slopes up to 20° at a max.

If possible, always work across the slope.

End of Operation

Never leave the shrub clearing machine

unattended with the engine running.

Before you leave the shrub clearing

machine, shut off the engine and the

mowing drive.

Secure shrub clearing machine against

unauthorized use. Remove the spark

plug connector.

Implements

Only mount implements with the engine

and the implement drive shut off.

Always use appropriate tools and wear

gloves when changing implements and

parts thereof.

Secure base machine and implements

against rolling off (parking brake, wheel

chocks).

Beware of injuries while coupling imple-

ments. Work with particular care.

Hitch implements as specified and only

couple at specified points.

Secure shrub clearing machine against

unauthorized use and rolling off when you

leave the machine. If necessary, install

transport or security devices and secure.

Cleaning and Maintenance

Never carry out any maintenance or

cleaning with the engine running.

Before you work on the engine or on the

mower, always remove spark plug con-

nector.

Check regularly and, if necessary, re-

place all protecting devices and tools

subject to wear and tear.

Replace damaged cutting knives.

Always wear safety gloves and use

proper tools when exchanging cutting

knive.

Keep shrub clearing machine and imple-

ment clean to avoid risk of fire.

Check nuts and bolts regularly for tight fit

and re-tighten, if necessary.

Ensure that you re-install all safety and

protective devices and bring them into

their protective position after maintenance

and cleaning.

Store anti-corrosive agents and stabiliz-

ing liquids out of reach of children. If sick-

ness and vomiting occur, see a doctor. If

fuel has contacted eyes, rinse them thor-

oughly, avoid inhaling of vapours.

Only use original agria spare parts. All

other commercial spare parts must cor-

respond to quality and technical require-

ments specified by agria.

Explanation of Symbols

Warning  danger

Important information

Oil level

Visual inspection

Open (unlocked)

Closed (locked)

Balanced; dyn. balance

è -Serviceç = please con-

tact your specialised agria workshop

Article-No.: ............................................................................................. 3656 511

Working width: ............................................................................................ 52 cm

Rotating knife: ......................................................... with replaceable knife blades

Lateral adjustment left and right ............................................................... 150 mm

Cardanic hinge

Bevel gear running in an oil bath, with free-wheeling system

Power consumption .............................................................................. abt. 4 kW

Working-place related emission value (at the ear of the operator) ......... 85 dB(A)

Weight .................................................................................................. abt. 40 kg

Dimensions: (mm)

Explanation of Warning Signs

Danger  objects may be catapulted.

Keep a minimum security distance of 50

m while engine is running.

Before commissioning the

machine, read operating

instructions and observe

warnings and safety instruc-

tions.

Before any cleaning, mainten-

ance, and repair work shut off the

engine and pull spark plug

connector.

With engine running, keep at a

safe distance from cutting knives.

Do not touch moving machinery

parts. Wait until they have come

to a complete stop.

With engine running, keep at a

safe distance.













1. Safety Instructions 2. Specifications

Operating Instructions

for agria

Mounted Shrub

Clearing Machine 3656 511

4682

for agria Two-Wheel Tractor 3600

for agria Grassland Mower 3600 BM; Unihamster

52 cm

The technical information, illustrations and measures given in these instructions

are not binding. Claims of any kind cannot be derived from them.

We reserve the right to make improvements without changing these instructions.

EC Conformity Declaration

in accordance with the EC directive machinery 98/37/EC

We,

agria-Werke GmbH

D-74215 Möckmühl/Württ.

herewith declare in sole responsibility that the product

Mounted Shrub Clearing Machine Type 3656 511

to which this declaration refers, corresponds to

the standard fundamental safety and health requirements

as stipulated in EC directive machinery 98/37/EC.

The following harmonized standards have been applied:

pr ES 12733 for shrub clearing machines

Möckmühl, 9th August 2000

on behalf of Gregor Czaja on behalf of Thomas Ilchmann

Head, Quality Assurance Head, Research and Development

Horticultural MachineryHorticultural Machinery

Horticultural Machinery

Operating Instructions No. 998 906 08.00

Before commissioning the machine, read operating

instructions and observe warnings and safety instructions.

998 906 08.00 agria type 3656 511 agria-Werke GmbH  D-74215 Möckmühl  Tel. 06298/39-0  Telefax 06298/38111  e-mail: [email protected]  Internet: http://www.agria.de 4

23 Nm

Type 3600

Type 3600 BM, Unihamster



max. 20 °

Hazardous area

6 50 h

3. Devices and Operating Elements 4. Commissioning and Operation 5. Maintenance 5. Maintenance 6. Troubleshooting

Problem Possible cause Remedy

Loosened attachment

bolts

Check attachment bolts, if

necessary re-tighten –

especially knife attachment

Unbalanced knife Balance knife

Too much material to be

cut

Reduce working width

Dull knife Re-sharpen knife

Sickle knife does not

rotate

Knife blocked by plant

trash or foreign object

Remove blockage

Excessive vibration

Mowing output

suddenly declines



6 50 h





3. Devices and

Operating Elements

3.1 Mounting to the Base

Machine

see operating instructions for the base

machine

3.2 Lateral Adjustment

3.3 Height Adjustment

4. Operation

Prior to every operation,

check mowing knives for

damage; replace them, if

required!

4.1 Hazardous Area

It is prohibited to stay in the

hazardous area of the Shrub

Clearing Machine during starting and

operation.

4.2 Safety Area

Prior to mowing, establish a safety

area around the terrain to be mowed

with a distance of at least 50 m.

The warnings must indicate that it is

prohibited to enter this area.

If the operator should notice that a

person or animal is staying within this

area, the machine must be shut

down without delay and must not be

operated again before the safety

area is free again.



Mowing area



Safety area



Warnings

4.3 Mowing on Slopes



Up to 20° at a max.



If possible, always work

cross to the slope

5. Maintenance

Only do all maintenance work with the

engine shut off and spark plug connec-

tor disconnected.

Wear safety gloves.

5.1 Knife Change

Dismantling



Unscrew nuts (D)



Withdraw bolts (E)



Replace knife blades (F)

Only use original knives, see

code-no. on the knife

Mounting



Mount knife blades (F) with bush (G)

to the knife carrier

Ensure correct position of the

blades



Mount bolts (E) with washers and nuts

(D) and tighten them = 23 Nm

5.2 Knives

After the first operating hours, then al-

ways after 50 operating hours at a min.



Check knife fastening and in general

bolts and nuts for tight seating



Remove foreign bodies from knife and

knife box



Check knife blades for damage and

sharp condition

Replace (knife blades in pairs only) and

balance damaged knives !

è - Serviceç

5.3 Transmission

Oil Level Check

Prior to first starting up and always

after 50 operating hours, check oil level.

l Withdraw hood (H)

l Unscrew locking bolt (L); oil must be

visible through the opening; refill, if

required

Only use transmission oil

SAE 80W/90!

If an oil leakage is visible:

immediately check oil level and seal the

leakage.

è - Serviceç

5.4 Cleaning

After every use of the shrub clearing

machine, clean it with water without delay.

All sliding parts must then be greased

with Bio lube oil or Bio grease.

After cleaning with a high-pressure

cleaner, shortly operate the Shrub

Clearer so that entered water is pressed

out.

Re-sharpen Knife Blades

The original cutting angle must

be maintained. The material loss

must be uniform at both blades, other-

wise unbalance.

5.5 Storage

For longer periods of no operation

prepare shrub clearing machine for

storage. Proceed as follows:

l Clean thoroughly.

l Repair paint coat.

l Grease all lubricating points and

operate the machine for a short time.

l Spray all blank parts with bio anti-

corrosive oil.

l Do not park the shrub clearing

machine in humid rooms, in rooms where

fertilizer is stored, in stables or adjacent

rooms because of severe corrosion.

l Cover the machine with cloth or a

similar cover.

6. Troubleshooting and Remedies

Observe safety instructions! Have all serious malfunctions on the

machine or engine repaired by your agria workshop. They have the

proper tools. Improper repairs can only add to the damage.

Page is loading ...

Agria 3656 Owner's manual

Brand: Agria

Model: 3656

Type: Owner's manual

Download PDF

report

in other languages

français: Agria 3656 Le manuel du propriétaire
Nederlands: Agria 3656 de handleiding

Agria 3656 Owner's manual

Agria 3656 Owner's manual

in other languages

Related papers

Other documents