Vivo STAND-V001E Assembly Instructions

Brand: Vivo

Model: STAND-V001E

Category: Flat panel desk mounts

Type: Assembly Instructions

Vivo STAND-V001E is a single monitor desk mount designed to provide an ergonomic and space-saving solution for your workspace. With its sturdy construction and adjustable features, this mount offers a range of benefits to enhance your computing experience:

Adjustable Height and Tilt: The mount allows you to position your monitor at your preferred height and tilt angle for optimal comfort and viewing experience.
360-Degree Rotation: Enjoy the flexibility to rotate your monitor smoothly from landscape to portrait orientation, providing versatility for various tasks and applications.

Adjustable Height and Tilt: The mount allows you to position your monitor at your preferred height and tilt angle for optimal comfort and viewing experience.
360-Degree Rotation: Enjoy the flexibility to rotate your monitor smoothly from landscape to portrait orientation, providing versatility for various tasks and applications.

Single Monitor Desk Mount

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/stand-v001e

SKU: STAND-V001E

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

PACKAGE CONTENTS

WARNING!

A (x1)

Arm

B (x1)

Clamp

C (x1)

Plastic Cap

M-A (x4)

M4x12

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please call a qualified technician. Check carefully to make sure there are no missing or

defective parts. Improper installation may cause damage or serious injury. Do not use this product

for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.

We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or

inappropriate use.

D (x1)

Pole

E (x1)

Cable Clip

F (x1)

Grommet

Base

G (x5)

Rubber Pad

H (x1)

Bolt

M-B (x4)

M5x12

TIPOVER WARNING

SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR

STAND.

• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL

USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED

I (x1)

Grommet

Plate

J (x1)

5mm Allen

Wrench

K (x1)

6mm Allen

Wrench

M-C (x4)

D5 Washer

ASSEMBLY STEPS

STEP 1

TOOLS NEEDED

17.6lbs

(7.98kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

Phillips

Screwdriver

Attach plastic cap (C) to top of pole (D).

STEP 2

OPTION A: Clamp Installation

Stick rubber pads (G) to bottom of clamp (B) as shown in diagram. Align pin in clamp (B)

with bottom hole in pole (D). Attach pole (D) to clamp (B) using bolt (H) and 6mm allen

wrench (K). Mount clamp (B) to desktop using hand bolt.

D C

STEP 2 (Continued)

OPTION B: Grommet Installation

Remove hand bolt from clamp (B) by first removing phillips screw from top

of bolt, then remove plate and unscrew. Stick rubber pads (G) to bottom of

grommet base (F). Align pin in grommet base (F) with bottom hole pole (D).

Mount pole (D) and grommet base (F) to desktop using grommet plate (I) and

previously removed hand bolt.

STEP 3

10-75m

Slide cable management clip (E) and arm (A) over top of pole (D) and secure desired

height using 5mm allen wrench (J).

STEP 4

Insert screws (M-A or M-B) with washers (M-C) into top two

holes of monitor, leaving 3mm of thread exposed. Hang

monitor over slots in VESA plate. Secure using screws and

washers in bottom two holes, and tighten all screws.

M-A/M- B

M- C

M-A/M- B

M- C

3m m

STEP 5

If needed, tighten tilt joint using 6mm allen wrench (K).

STEP 6

Store tools (K, J) in cable management clip (E) for future adjustments.

+45 °

-45°

STEP 7

Manage cables and adjust tilt and rotation of monitor as desired.

360°

LAST UPDATED: 03/05/2020

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

[email protected]

AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

AVG. RESOLUTION TIME (within oice hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

309-278-5303

Vivo STAND-V001E Assembly Instructions

Brand: Vivo

Model: STAND-V001E

Category: Flat panel desk mounts

Type: Assembly Instructions

Adjustable Height and Tilt: The mount allows you to position your monitor at your preferred height and tilt angle for optimal comfort and viewing experience.
360-Degree Rotation: Enjoy the flexibility to rotate your monitor smoothly from landscape to portrait orientation, providing versatility for various tasks and applications.

Download PDF

report

Vivo STAND-V001E Assembly Instructions

Vivo STAND-V001E Assembly Instructions

Related papers

Other documents