SA2CAM04
SA2CAM08
SA2CAM16
Register your product and get support at
www.philips.com/welcome
EN User manual
1
English
EN
Contents Contents
1 Important safety information 3
General maintenance 3
Recycling the product 4
2 Your new CAM 6
What’s in the box 6
3 Getting started 7
Overview of the controls and
connections 7
Limit the volume 7
Connect and charge 8
Connect CAM to a computer 8
Install Philips Songbird for the rst
time 8
Install the Philips Songbird software
again (after the rst installation) 9
Battery level indication 9
Software loaded on the CAM 9
Files loaded on the CAM 9
Update CAM 10
Manually verify / update the
rmware 10
Turn CAM on and off 10
Automatic shut-down 10
Lock the keys 10
Select the mode 10
4 Philips Songbird 11
Build a media library 11
Rip a CD 11
Set up the CD rip options 11
Import media les from a directory 11
Import iTunes media 11
Export media to iTunes 12
Get content from online sources 12
Browse your media library 12
Organize and manage your Songbird
library 12
Let Songbird manage your media 12
Remove media les from the
Songbird media library 12
Delete media 13
Let Songbird watch a folder 13
Fetch album artwork 13
Playlists 13
Create a playlist 13
Add titles to a playlist 13
Remove titles from a playlist 14
Change the look of the Songbird library 14
Format CAM (erase all music and data) 14
Repair CAM (restore factory settings) 15
5 Music 16
Listen to music 16
Find your music 16
Delete a music le from CAM 16
Organize your music on CAM 16
6 Camera 17
Take photos 17
Record videos 17
7 Video 18
Play videos 18
Play videos on a TV 18
Delete a video le from CAM 18
Transfer videos to a PC 19
Upload videos to YouTube 19
8 Pictures 20
Add pictures to the CAM 20
View pictures 20
View your pictures as a slideshow 20
Delete a picture le from CAM 20
Transfer pictures to a PC 20
9 Radio 21
Auto-tune to FM radio stations 21
Listen to FM radio 21
Manually tune to FM radio stations 21
Save a radio station to a preset number 22
2 EN
10 Recordings 23
Record from the FM radio 23
Record voices/audio 23
Listen to recordings 23
Upload your recordings to a computer 23
Delete one or more recordings 24
11 Micro SD cards 25
Insert a Micro SD card 25
Access the les on a Micro SD card 25
12 UseCAMtocarryles 26
13 Settings 27
14 Technical data 29
System requirements 29
15 Glossary 30
Need help?
Please visit
www.philips.com/welcome
where you can access a full set of supporting
materials such as the user manual, the latest
software updates, and answers to frequently
asked questions.
3
English
EN
Important safety 1
information
General maintenance
The translation of this document is for
reference only.
In the event of any inconsistency between the
English version and the translated version, the
English version shall prevail.
Caution
To avoid damage or malfunction: •
Do not expose the product to excessive heat •
caused by heating equipment or direct sunlight.
Do not drop the product or allow objects to •
fall on your player.
Do not allow the product to be submerged •
in water. Do not expose headphone socket
or battery compartment to water, as water
entering the set may cause major damage.
Active mobile phones in the vicinity may cause •
interference.
Back up your les. Ensure that you retain the •
original les you have downloaded to your
device. Philips is not responsible for any loss of
data if the product becomes damaged or not
readable / legible.
Manage (transfer, delete, etc.) your music les •
only with the supplied music software to avoid
problems.
Do not use any cleaning agents containing •
alcohol, ammonia, benzene, or abrasives as
these may harm the product.
About operating and storage temperatures
Operate in a place where temperature is •
always between 0 and 35ºC (32 to 95ºF)
Store in a place where temperature is •
always between -20 and 45ºC (-4 to
113ºF ).
Battery life may be shortened in low •
temperature conditions.
Replacement parts/accessories:
Visit www.philips.com/support to order
replacement parts/accessories.
Hearing Safety
Listen at a moderate volume:
Using headphones at a high volume can impair
your hearing. This product can produce sounds
in decibel ranges that may cause hearing loss for
a normal person, even for exposure less than
a minute. The higher decibel ranges are offered
for those that may have already experienced
some hearing loss.
Sound can be deceiving. Over time your hearing
‘comfort level’ adapts to higher volumes of
sound. So after prolonged listening, what sounds
‘normal’ can actually be loud and harmful to
your hearing. To guard against this, set your
volume to a safe level before your hearing
adapts and leave it there.
To establish a safe volume level:
Set your volume control at a low setting.
Slowly increase the sound until you can hear it
comfortably and clearly, without distortion.
Listen for reasonable periods of time:
Prolonged exposure to sound, even at normally
‘safe’ levels, can also cause hearing loss.
Be sure to use your equipment reasonably and
take appropriate breaks.
Be sure to observe the following guidelines
when using your headphones.
Listen at reasonable volumes for reasonable
periods of time.
Be careful not to adjust the volume as your
hearing adapts.
Do not turn up the volume so high that you
can’t hear what’s around you.
You should use caution or temporarily
discontinue use in potentially hazardous situations.
Do not use headphones while operating a
motorized vehicle, cycling, skateboarding, etc.; it
may create a trafc hazard and is illegal in many
areas.
4 EN
Modications
Modications not authorized by the
manufacturer may void user’s authority to
operate the product.
Copyright information
All other brands and product names are
trademarks of their respective companies or
organizations.
Unauthorized duplication of any recordings
whether downloaded from the Internet or
made from audio CDs is a violation of copyright
laws and international treaties.
The making of unauthorized copies of copy-
protected material, including computer
programs, les, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offense.
This equipment should not be used for such
purposes.
The Windows Media and the Windows logo are
registered trademarks of Microsoft Corporation
in the United States and/or other countries.
Be responsible! Respect copyrights.
Philips respects the intellectual property of
others, and we ask our users to do the same.
Multimedia content on the internet may have
been created and/or distributed without the
original copyright owner’s authorization.
Copying or distributing unauthorized content
may violate copyright laws in various countries
including yours.
Compliance with copyright laws remains your
responsibility.
The recording and transfer to the portable
player of video streams downloaded to your
computer is intended only for use with public
domain or properly licensed content. You
may only use such content for your private,
non-commercial use and shall respect eventual
copyright instructions provided by the copyright
owner of the work. Such instruction may
state that no further copies shall be made.
Video streams may include copy protection
technology that prohibits further copying. For
such situations the recording function will not
work and you will be notied with a message.
Data logging
Philips is committed to improving the quality
of your product and enhancing the Philips user
experience. To understand the usage prole of
this device, this device logs some info / data to
the non-volatile memory region of the device.
These data are used to identify and detect
any failures or problems you as a user may
experience while using the device. The data
stored, for example, will be the duration of
playback in music mode, duration of playback
in turner mode, how many times battery low
was encountered, etc. The data stored do not
reveal the content or media used on the device
or the source of downloads. The data stored on
the device are retrieved and used ONLY if the
user returns the device to the Philips service
center and ONLY to simplify error detection
and prevention. The data stored shall be made
available to user on user’s rst request.
Recycling the product
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When you see the crossed-out wheel bin
symbol attached to a product, it means the
product is covered by the European Directive
2002/96/EC:
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
5
English
EN
electrical and electronic products. The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
Warning
Removal of the built-in battery invalidates the •
warranty and can destroy the product.
The following removal and disposal •
instructions are steps that are to be
performed at the end of the product’s life only.
Your product contains a built-in rechargeable
battery covered by the European Directive
2006/66/EC, which cannot be disposed of with
normal household waste.
To safeguard the functionality and safety of your
product, take your product to an ofcial collection
point or service center where a professional can
remove or replace the battery as shown:
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
negative consequences on the environment and
human health.
Notice for the European Union
This product complies with the radio
interference requirements of the European
Union.
6 EN
2 Your new CAM
CAM allows you to
play MP3 and WMA les•
view video les•
capture still photos and videos•
listen to FM radio•
make recordings•
What’s in the box
Check that you have received the following items:
Player
Earphones
USB + AV cable
Quick start guide
Philips GoGear audio player
Quick start guide
Note
The images serve as reference only. Philips •
reserves the right to change color/design
without notice.
7
English
EN
3 Getting started
Overview of the controls and
connections
a
display
b
mode selector
c
press: play/capture/record/
pause/conrm
d
/ press: skip to previous/next
press and hold: scroll back/
forward at high speed
e
USB connection jack
f
headphone jack
g
view available options
h
RESET press: reset CAM
i
/ press: scroll up/down
press and hold: scroll up/
down at high speed
j
MICRO SD Micro SD card slot
k
press: back one level
press and hold: return to
main menu
l
slide and hold: turn CAM
on/off
slide: lock/unlock all buttons
except /
m
/ press: increase/decrease the
volume
press and hold: increase/
decrease fast
n
camera
o
MIC microphone
Mode selector options:
a
show current play/display screen
b
enter photo capture mode
c
enter video capture mode
d
enter settings mode
Limit the volume
Caution
Listening to loud sounds for longer than a •
moment can be harmful to the listener.
Set the volume level of CAM to limit the
maximum volume output.
1 From the main menu, select [Settings] >
[Sound settings] > [Volume limit].
2 Press the volume controls / to adjust
the level.
3 Press to conrm.
When you set a volume limit, CAM »
can no longer exceed the set volume,
even if you press the volume
button.
8 EN
To enable maximum volume again:
1 Select [Settings] > [Sound settings]
>[Volume limit].
2 Set the volume limit to maximum.
3 Press to conrm.
Connect and charge
CAM has a built-in battery that can be charged
through the USB port of a computer (USB
cable included).
Connect CAM to a computer
1 Connect the USB plug of the supplied
USB cable to a spare USB port on your
computer.
2 Connect the small USB plug of the USB
cable to the small USB jack on CAM.
3 Turn on your computer.
CAM charges. »
InstallPhilipsSongbirdfortherst
time
When you connect CAM to the PC for the
rst time, a pop-up window appears:
1 Select Install Philips Songbird.
2 Follow the on-screen instructions to
complete the installation.
Note
The installation requires you to agree to the •
license terms.
If the pop-up window is not displayed
automatically:
1 Select My Computer (Windows XP /
Windows 2000) / Computer (Windows
Vista / Windows 7).
2 Right click on the Philips GoGear CAM
icon.
3 Select Install Philips Songbird (Setup.
exe).
4 Follow the on-screen instructions to
complete the installation.
Note
The installation requires you to agree to the •
license terms.
9
English
EN
Install the Philips Songbird software
again(aftertherstinstallation)
Important!
The Philips Songbird software installer is
preloaded to CAM.
To free memory capacity for your media
content on CAM, the installer le is
automatically deleted during the rst
installation process.
If you want to install the software any time
after the rst installation, follow these
instructions:
1 Connect CAM to the computer.
2 Ensure that the computer is connected
to the Internet, and then open Windows
Explorer.
3 In Windows Explorer, right click on CAM,
and then select the option to install
Philips Songbird.
The computer downloads the installer »
le from the Internet.
4 Follow the on-screen instructions to
complete the installation.
Battery level indication
The display indicates the approximate levels of
the battery status as follows:
100% 75% 50% 25% 0%
A ashing battery screen indicates »
that the battery is low. The player
saves all settings and switches off
within 60 seconds.
Note
Rechargeable batteries have a limited number •
of charge cycles. Battery life and number of
charge cycles vary by use and settings.
The charging animation stops and the •
icon is displayed when the charging process is
completed.
Tip
You can conserve battery power and increase •
the play time of CAM if you ensure that the
shortest timer setting is selected. (To check/
adjust the timer settings, set the mode selector
to and then select [Display Settings] >
[Backlight timer].
Software loaded on the CAM
CAM comes with the following software:
• Philips Songbird (helps you update the
rmware of CAM and transfer your
media les).
Files loaded on the CAM
The following les are loaded on CAM:
User Manual•
Frequently Asked Questions•
10 EN
Update CAM
CAM is controlled by an internal program
called rmware. Newer versions of the
rmware may have been released after you
have purchased CAM.
The software program called Philips Songbird
can use your computer to check for rmware
updates that are available on the Internet.
Install Philips Songbird on your computer
(see chapter Install software) and follow the
instructions to update (see chapter Manually
verify/updatethermware).
Note
Your music les are not affected by a rmware •
update.
Manuallyverify/updatethermware
1 Ensure that your computer is connected
to the Internet.
2 Connect CAM to the computer
(see section Connect and charge for
instructions).
3 On your computer, click Start >
Programs > Philips > Philips Songbird to
launch the Philips Songbird application.
4 Click CAM in the left pane. Then, select
Tools > Checkforupdatedrmware in
the pop-up window
» Philips Songbird checks for updates
and installs new rmware from the
Internet, if available.
5 Follow the on-screen instructions to
update the rmware of CAM.
6 Wait until the update is completed, then
disconnect CAM from the computer.
CAM restarts after the rmware is »
updated and is ready for use again.
Turn CAM on and off
1 To toggle between modes on and off,
slide and hold for approximately 2
seconds.
Automatic shut-down
CAM has an automatic shut-down feature that
can save battery power.
After 10 minutes in idle mode (no music plays,
no button is pressed), CAM turns off.
1 Slide and hold for approximately 2
seconds to turn CAM on again.
Lock the keys
CAM has a lock switch to prevent accidental
operation.
1 To lock the buttons when you play, move
the slider to position .
All buttons except the volume keys »
are locked and the display shows a
lock icon.
2 To unlock the buttons again, move the
slider to the center position.
Select the mode
1 Slide the mode selector to switch
between modes.
11
English
EN
4 Philips Songbird
CAM comes with the Philips Songbird software.
The Philips Songbird software helps you to:
purchase new media (music and videos) •
online
create a media library•
manage your media library•
play music and videos•
sync your media with the CAM•
When Philips Songbird is launched for the
rst time, choose from the following options
to import media les into the Songbird media
library:
Import an existing iTunes library.•
Scan for media les in specic directories. •
(You can select to watch a folder, so that
the les that are added or deleted there
are automatically added or deleted in the
Songbird media library.)
Build a media library
Use one or more of the following options to
build a media library with Songbird:
Rip a CD
By default, the Philips Songbird software
installs the following add-ons that are needed
to rip a CD:
CD Rip Support•
Gracenote Metadata Lookup Provider•
Set up the CD rip options
1 On the computer, launch the Songbird
program.
2 Select Tools > Options....
3 Select the CD Rip tab, and then choose
your CD rip options.
4 Click on OK to conrm.
Importmedialesfromadirectory
The following steps show how you can import
media (music and video) les that are stored
elsewhere on your computer or computer
network:
1 On the computer, launch the Songbird
program.
2 On the Songbird toolbar, click File, then
select Import Media....
3 Select your media (music and video) les,
then click OK.
The media les that you added are »
listed in the media library.
Tip
If you select a folder that contains music or •
video les, the software scans the folder and
adds all the music or video les it contains to
the media library (duplicate titles are ignored).
Import iTunes media
1 On the computer, launch the Songbird
program.
2 Select Tools > Options....
3 On the Songbird toolbar, select the
Media Importer tab, then iTunes Import/
Export.
4 Verify your library location and options.
5 Select Import Library.
The software imports the iTunes »
library into Songbird.
12 EN
Export media to iTunes
1 On the computer, launch the Songbird
program.
2 Select Tools > Options....
3 On the Songbird toolbar, select the Media
Importer tab, then iTunes Import/Export.
4 Verify your library location and options.
5 Select Export Library.
The software exports the library from »
Songbird to iTunes.
Get content from online sources
You can purchase content from online sources
such as the following:
7-digital•
Check the specications of your CAM to see
what services are available to you.
Browse your media library
The Songbird media library is structured as follows:
a
b
c
d
a Player Pane (this is where the CAM is
displayed)
b Library Pane (this is where you nd the
contents of your library)
c Service Pane (this is where you nd
additional information about contents,
such as playlists)
d Information Pane (this is were you nd
information about the selected options)
Organize and manage your
Songbird library
Let Songbird manage your media
1 On the computer, launch the Songbird
program.
2 Select Tools > Options….
3 On the Songbird toolbar, select the
Manage Files tab.
4 Check Allow Songbird to manage my
les.
5 Set the options on how you want to
organize your media.
RemovemedialesfromtheSongbird
media library
1 In the Songbird library, right click on a
media le, then select Remove.
2 In the prompt window, click Remove to
conrm that you want to remove the le.
The selected le is removed from »
the library and from all playlists. (By
default, the le is only “removed”, not
“deleted”. The media le still exists in
its original location on the computer
or computer network.)
Tip
To select multiple les on the computer (PC), •
press and hold Ctrl.
To select multiple consecutive les, press and •
hold Shift.
13
English
EN
Delete media
This is how to delete media les in Windows
Explorer:
1 With CAM connected to the computer,
open Windows explorer.
2 Locate the media folder in CAM.
3 Delete the media le in the same way as
you would from any other location on the
computer.
Let Songbird watch a folder
You can let Songbird
monitor the contents of a folder, and•
add or remove the media from your •
library to match the folder contents.
1 On the computer, launch the Songbird
program.
2 Select Tools > Options....
3 On the Songbird toolbar, select the
Media Importer tab, and then Watch
Folders.
4 Select the folder that you want Songbird
to watch for changes.
The selected folder is watched and »
Songbird matches the library content
to the content of the folder.
Fetch album artwork
Choose from these options to fetch the
artwork for your albums:
1 On the computer, launch the Songbird
program.
On the Songbird toolbar, select • Tools >
Get Album Artwork.
If no titles are selected, Songbird »
fetches the artwork for all titles in the
library.
Right-Click on selected titles.•
Songbird fetches the artwork for all »
selected titles.
Playlists
By default, the Philips Songbird software installs
the following add-ons that are needed to rip a
CD:
CD Rip Support•
Gracenote Metadata Lookup Provider•
Create a playlist
1 On the computer, launch the Songbird
program.
2 Choose from these options to create a
new playlist:
On the Songbird toolbar, select • File
> New Playlist.
Right-click on the left hand sidebar, •
and then choose New Playlist.
Click the • + symbol at the bottom of
the left hand side Service Pane.
A new playlist appears in the Service »
Pane.
3 Enter a name for the new playlist.
Add titles to a playlist
1 On the computer, launch the Songbird
program.
2 Select one or more titles.
3 Choose from these options to add the
selected titles to a playlist:
Drag and drop the selected titles to •
the playlist in the Service Pane.
Right-click on the selection, and then •
select Add to Playlist > The_name_
of_your_playlist.
All selected titles are added to the »
playlist.
14 EN
Remove titles from a playlist
1 On the computer, launch the Songbird
program.
2 Select a playlist.
3 Right-click on the title that you want to
remove, and then Remove.
The selected title is removed from the »
playlist.
Change the look of the
Songbird library
You can change the design and color scheme
of the Songbird library. We call this “changing
feathers”. New feathers are installed and
managed like add-ons.
Find new feathers
1 On the computer, launch the Songbird
program.
2 On the Songbird toolbar, select View >
Feathers > Get More Feathers….
The software searches for new »
feathers.
Follow the on-line instructions to »
install the new feathers.
Format CAM (erase all music
and data)
Philips Songbird has a Format feature that you
can use to format CAM and erase all your les
from the internal memory.
Caution
The following procedure erases all your les •
that are stored on CAM.
1 Install Philips Songbird on your computer
(see chapter Install software), and then
launch the program.
2 In the Philips Songbird player pane, click
on CAM.
3 In the library pane, click on the tab called
Tools.
4 In the tools pane, click on Format device.
5 Follow the on-screen instructions to
complete the repair procedure.
15
English
EN
Repair CAM (restore factory
settings)
Philips Songbird has a repair feature that you
can use to restore CAM to the factory settings.
Before you proceed, back up your les that are
stored on CAM if possible.
Caution
The following procedure erases all your les •
that are stored on CAM, and restores the
factory settings.
1 Install Philips Songbird on your computer
(see chapter Install software), and then
launch the program.
2 In the Philips Songbird menu bar (at the
top), click on the Tools pull-down menu
and then select Repair My CAM.
3 Follow the on-screen instructions to
complete the repair procedure.
16 EN
5 Music
Listen to music
1 Set the mode selector to position .
2 Navigate the main menu to select
[Music].
3 Navigate the music menu and sub-menus
to locate the music le.
4 Press to play.
Press • to toggle between pause
and play.
Tip
In music mode, press • to view more music
options.
This is how to navigate within a music track:
1 While you listen to a music track, press
and hold / to quickly scan forward /
backward.
Release • to resume normal speed
play.
Find your music
Choose from these list options to nd your music:
[All songs]
Alphabetically listed tracks•
[Artists]
Alphabetically listed artists•
Alphabetically listed albums•
Tracks listed in album order•
[Albums]
Alphanumerically listed albums•
Tracks listed in album order•
[Genres]
Alphanumerically listed genres•
Alphanumerically listed artists•
Alphanumerically listed albums•
Tracks listed in album order•
DeleteamusiclefromCAM
1 While you listen to music, press and
then select [Delete].
2 Select [Yes] to conrm the deletion.
Select • [No] to abort the deletion.
Organize your music on CAM
CAM can store hundreds of music tracks (les)
that can be sorted into folders.
1 With CAM connected to the USB port
of the computer, open the Explorer
application of the computer.
2 Create folders in the mass storage of
CAM.
3 Use drag and drop actions to sort your
music into the folders.
17
English
EN
6 Camera
Take photos
Caution
Caution! The camera feature triggers loud •
noise emissions.
To avoid harming your ears, remove the •
earphones before you use the camera feature.
1 Set the mode selector to position .
2 Press to take a photo.
CAM displays an options menu. »
3 Select an option from the menu to:
take a new photo•
display the last photo•
delete the last photo•
The photo camera has effect options that you
can change:
1 While you display the photo that you
have captured, press and then select
the effect options.
2 Press or to navigate the options list.
3 Press to conrm an option.
4 Press to return to camera mode.
Record videos
1 Set the mode selector to position .
2 Press to record a video.
Press • again to stop recording.
CAM displays an options menu.•
3 Select an option from the menu to:
record a new video•
play the last video•
delete the last video•
18 EN
7 Video
Play videos
1 Set the mode selector to position .
2 Navigate the main menu to select
[Video].
3 Navigate the video menu and sub-menus
to locate the video le.
4 Press to play.
Press • to toggle between pause
and play.
Tip
In video mode, press • to view more video
options.
This is how to navigate within a video:
1 While you watch a video, press and hold
/ to quickly scan forward / backward.
Release • to resume normal speed
play.
Play videos on a TV
This is how you play video clips from CAM on
a TV:
Connect CAM to a TV
1 On CAM, select the TV-out signal that
matches the TV:
Set the mode selector to position •
and then select [Screen settings] >
[TV-out signal];
Select • [PAL] or [NTSC].
2 Connect the supplied USB AV cable to
the small USB jack of the CAM; •
the AV outlet jacks of the TV.•
To extend the play time: Use a USB •
charger (sold separately) to connect
the CAM to the mains supply.
Play videos on a TV
1 Turn on the TV.
2 On CAM, play a video:
Set the mode selector to position •
and then select [Video];
Select a video le and press • to
play.
3 On CAM, press , and select [Start
TVout].
The video plays on your TV. »
Press the buttons on the CAM for •
play options and navigation.
DeleteavideolefromCAM
1 While you play a video, press and then
select [Delete].
2 Select [Yes] to conrm the deletion.
Select • [No] to abort the deletion.
19
English
EN
Transfer videos to a PC
You can transfer your videos from CAM to a
PC.
1 On the PC, click My Computer or
Computer.
2 Connect CAM to your PC by using the
USB cable.
CAM is displayed after recognized by »
the PC.
3 Find the desired les/folders:
On CAM, nd your videos in • Video
> Captures.
On the PC, nd a location (e.g. a le •
folder) to store the videos.
4 Drag and drop videos from CAM to the
desired location on the PC.
Upload videos to YouTube
With Philips Songbird, you can upload videos
to YouTube, from Songbird videos library or
from CAM.
Enable uploading
1 On your PC, launch Philips Songbird.
2 On the bottom pane, click as shown,
and select Draglestologotoupload.
On the bottom pane, an area appears »
for you to drop videos to be uploaded.
Upload videos to YouTube
1 Connect your PC to the Internet. Log in
to YouTube.
2 On Philips Songbird, select the desired
video:
Click • CAM > Videos to select videos
from CAM.
Click • Library > Videos to select
videos from Songbird videos library.
If necessary, rst select File > Import
Media to import your PC media
library to Philips Songbird.
3 Drag and drop the desired video to the
drop area on bottom pane.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
