REDMix3•192
20
“MACr“‐ colourmacros(0‐255)
“Stro.“‐astrobe,shutter(0‐255)
“dimr“‐adimmer(0‐255)
“F.tim.“‐ afadetime,(0‐25.5 )seconds
“S.tim.“‐ steptime,value(0‐25.5)seconds
“COPY“.–thisitemduplicatesthecurrentprog.steptothenextprog.step.Theitem“P.End”
isincreased
automatically.
6. UsetheUP/DOWNbuttonstosetaDMXvalueofthechannelandthenpresstheENTERbutton.
7. UsetheUP/DOWNbuttonstoselectnextchannelandpresstheENTERbutton.
8. Afterhavingsetallchannelsinthecurrentprogramstep,presstheMODE
buttontogobyonemenulevel
backandselectanotherprogramstep.
6.7Specialfunctions
rdML
‐‐‐Code.ThismenuitemshowsthefirstpartoftheRDMidentification code.
rdMH
‐‐‐Code.ThismenuitemshowsthesecondpartoftheRDMidentificationcode.
AdJ‐‐‐EffectAdjustment.ThemenuallowscalibrationofeachLEDsarray.
dMH‐‐‐DMXValues.ThemenuitemenablestocontrolallLEDsbeforecalibratingeachLEDsarray.
CAL.U‐‐‐Calibratingunit.Themenuservesforfine
currentcalibrationofLEDsduringfixtureburn‐inat
afactory.EachLEDarraycanbecalibratedseparately.Usersshouldnotchangethesetting.
uPd.M.‐‐‐Updati ngmode.ThemenuitemallowsyoutoupdatesoftwareinthefixtureviaeitherserialorUSBport
ofPC.
Thefollowingarerequiredinordertoupdatesoftware:
‐PCrunningWindows95/98/2000/XPorLinux
‐DMXSoftwareUploader
‐FlashcableRS232/DMXNo.13050624(ifyouwanttouse
aserialportofPC)
‐DreamBox(ifyouwanttouseanUSBportofPC)
Note1:Softwareupdateshouldexecuteaqualifiedperson. Ifyoulackqualification,donotattempttheupdate
yourselfandaskforhelpyourROBEdistributor.
Note2:DMXaddress,programs1‐3andall
itemsinthemenu"PErS"willbesettotheirdefaultvalues.
Toupdatesoftwareinthefixture:
I.InstallationoftheDMXSoftwareUploader.
1.DMXSoftwareUploaderprogramisavailablefromtheROBEwebsiteatWWW.robe.cz.
2.Makeanewdirectory(e.g.Robe_Uploader)on
yourharddiskanddownloadthesoftwaretoit.
3.Unpacktheprogramfromthearchive.(IftheRobefixtureisproducedinbothmagneticandelectronic
ballastversion,nameofDMXSoftwareUploaderisthesameforbothversions).
II.Fixturesoftwareupdating.
1. Determinewhichofyour
portsisavailableonyourPCandconnectit:
‐ withtheDMXinputofthefixtureifyouusingtheflashcableRS232/DMX
‐ withtheDMXinputoftheDreamBoxifyouusingtheUSBcable.
DisconnectthefixturefromtheotherfixturesinaDMXchain.Turnboth
thecomputerandthefixtureon.
Makesurethelampisswitchedoff(onlyifthefixtureinvolvesalamp).
2. Switchthefixturetotheupdatingmode:
1 UsetheUP/DOWNbuttonstofind“SPEC.“menu.
2 PresstheENTERbutton.
3 UsetheUP/DOWNbuttonstoselect
“uPd.M.“item.