Infinity 6030CS 6-1/2" car speakers deliver exceptional sound quality with their 2-way component system, handling up to 90W RMS and 270W peak power. Experience a wide frequency range from 53Hz to 21kHz with 93dB sensitivity, ideal for various music genres. The adjustable tweeter level control allows you to fine-tune the sound to your preference, compensating for off-axis placement if needed.
Infinity 6030CS 6-1/2" car speakers deliver exceptional sound quality with their 2-way component system, handling up to 90W RMS and 270W peak power. Experience a wide frequency range from 53Hz to 21kHz with 93dB sensitivity, ideal for various music genres. The adjustable tweeter level control allows you to fine-tune the sound to your preference, compensating for off-axis placement if needed.
4-1/4"
110mm
2-1/16"
51mm
4-1/2"
115mm
6-5/16"
159mm
3-9/16"
90mm
1-13/16"
45mm
3-1/4"
84mm
5"
127mm
2-3/8"
60mm
2-1/16"
52mm
1/2"
19mm
7/8"
22mm
11/16"
17mm
1-3/4"
44mm
1-1/8"
30mm
REFERENCE
6030cs
Declaration of Conformity
W
e,
Harman Consumer Gr
oup,
Inc.
2, route de Tours
72500 Chât
eau du Loir
F
r
ance
declar
e in own responsibility that the product described in this owner’s
manual is in compliance with technical standards:
EN 61000-6-3:2001
EN 61000-6-1:2001
Klaus Lebherz
Harman Consumer Gr
oup,
Inc.
Château du Loir, France 4/09
6030cs
BL (T-m) 4.70
DCR (ohms) 2.30
Mms (g) 15.10
Sd (sq cm) 132.7
Cms (µm/N) 236
Vas (l) 5.84
Fs (Hz) 84.3
Qes 0.83
Qms 6.61
Qt 0.74
SPECIFIC
A
TIONS
6030cs
Type: 6-1/2" (160mm)
2-Way Component
Impedance: 2 Ohms
Power Handling,RMS: 90W
Power Handling,Peak: 270W
Frequency Response: 53Hz – 21kHz
Sensi
t
ivity (2.83V, 1m): 93dB
W
A
RRANTY:
Re
f
erence Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity
®
car audio retailer can help you determine the length
of your warranty.To register your product, please visit www.infinitysystems.com.
SPECIFICATIONS
6030c
s
T
ype:
6-1/2" (160mm)
2-Way Component
Impedance: 2 Ohms
P
o
w
er Handling,
RMS:
90W
Power Handling,Peak: 270W
Frequency Response: 53Hz – 21kHz
Sensi
tivity (2.83V, 1m): 93dB
W
ARRANTY:
Re
ference Series speakers are warranted against defects.
T
he dur
a
tion of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity
®
car audio retailer can help you determine the length
of y
our w
arr
anty
.
T
o r
egist
er your product, please visit www.infinitysystems.com.
SPECIFICATIONS
6030cs
Type: 6-1/2" (160mm)
2-Way Component
Impedance: 2 Ohms
Power Handling,RMS: 90W
Power Handling,Peak: 270W
Frequency Response: 53Hz – 21kHz
Sensitivity (2.83V, 1m): 93dB
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity
®
car audio retailer can help you determine the length
of your warranty.To register your product, please visit www.infinitysystems.com.
SPECIFIC
A
TIONS
6030cs
Type: 6-1/2" (160mm)
2-W
ay Component
Impedance:
2 Ohms
Power Handling,RMS: 90W
Power Handling,Peak: 270W
Frequency Response: 53Hz – 21kHz
Sensi
t
ivity (2.83V, 1m): 93dB
W
A
RRANTY:
Re
f
erence Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity
®
car audio retailer can help you determine the length
of your warranty.To register your product, please visit www.infinitysystems.com.
SPECIFICATIONS
6030c
s
Type: 6-1/2" (160mm)
2-W
ay Component
Impedance: 2 Ohms
P
o
w
er Handling,
RMS:
90W
Power Handling,Peak: 270W
Frequency Response: 53Hz – 21kHz
Sensi
t
ivi
ty (2.83V, 1m): 93dB
W
A
RRANTY:
Re
f
erence Series speakers are warranted against defects.
T
he dur
a
tion of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity
®
car audio retailer can help you determine the length
of your warranty.To register your product, please visit www.infinitysystems.com.
SPECIFICATIONS
6030cs
Type: 6-1/2" (160mm)
2-Way Component
Impedance:
2 Ohms
Power Handling,RMS: 90W
Power Handling,Peak: 270W
Frequency Response: 53Hz – 21kHz
Sensi
tivity (2.83V, 1m): 93dB
W
ARRANTY:
Re
ference Series speakers are warranted against defects.
T
he dur
a
t
ion of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity
®
car audio retailer can help you determine the length
of y
our warranty.To register your product,please visit www.infinitysystems.com.
SPECIFICATIONS
6030cs
Type: 6-1/2" (160mm)
2-Way Component
Impedance: 2 Ohms
Power Handling,RMS: 90W
Power Handling,Peak: 270W
Frequency Response: 53Hz – 21kHz
Sensitivity (2.83V, 1m): 93dB
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity
®
car audio retailer can help you determine the length
of your warranty.To register your product, please visit www.infinitysystems.com.
SPECIFIC
A
TIONS
6030cs
Type: 6-1/2" (160mm)
2-W
ay Component
Impedance:
2 Ohms
Power Handling,RMS: 90W
Power Handling,Peak: 270W
Frequency Response: 53Hz – 21kHz
Sensi
t
ivity (2.83V, 1m): 93dB
W
A
RRANTY:
Re
f
erence Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity
®
car audio retailer can help you determine the length
of your warranty.To register your product, please visit www.infinitysystems.com.
SPECIFICATIONS
6030c
s
Type: 6-1/2" (160mm)
2-W
ay Component
Impedance: 2 Ohms
P
o
w
er Handling,
RMS:
90W
Power Handling,Peak: 270W
Frequency Response: 53Hz – 21kHz
Sensi
t
ivi
ty (2.83V, 1m): 93dB
W
A
RRANTY:
Re
f
erence Series speakers are warranted against defects.
T
he dur
a
tion of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity
®
car audio retailer can help you determine the length
of your warranty.To register your product, please visit www.infinitysystems.com.
SPECIFICATIONS
6030cs
Type: 6-1/2" (160mm)
2-Way Component
Impedance:
2 Ohms
Power Handling,RMS: 90W
Power Handling,Peak: 270W
Frequency Response: 53Hz – 21kHz
Sensi
tivity (2.83V, 1m): 93dB
W
ARRANTY:
Re
ference Series speakers are warranted against defects.
T
he dur
a
t
ion of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity
®
car audio retailer can help you determine the length
of y
our warranty.To register your product,please visit www.infinitysystems.com.
SPECIFICATIONS
6030cs
Type: 6-1/2" (160mm)
2-Way Component
Impedance: 2 Ohms
Power Handling,RMS: 90W
Power Handling,Peak: 270W
Frequency Response: 53Hz – 21kHz
Sensitivity (2.83V, 1m): 93dB
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity
®
car audio retailer can help you determine the length
of your warranty.To register your product, please visit www.infinitysystems.com.
SPECIFIC
A
TIONS
6030cs
Type: 6-1/2" (160mm)
2-W
ay Component
Impedance:
2 Ohms
Power Handling,RMS: 90W
Power Handling,Peak: 270W
Frequency Response: 53Hz – 21kHz
Sensi
t
ivity (2.83V, 1m): 93dB
W
A
RRANTY:
Re
f
erence Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity
®
car audio retailer can help you determine the length
of your warranty.To register your product, please visit www.infinitysystems.com.
SPECIFICATIONS
6030c
s
Type: 6-1/2" (160mm)
2-W
ay Component
Impedance: 2 Ohms
P
o
w
er Handling,
RMS:
90W
Power Handling,Peak: 270W
Frequency Response: 53Hz – 21kHz
Sensi
t
ivi
ty (2.83V, 1m): 93dB
W
A
RRANTY:
Re
f
erence Series speakers are warranted against defects.
T
he dur
a
tion of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity
®
car audio retailer can help you determine the length
of your warranty.To register your product, please visit www.infinitysystems.com.
SPECIFICATIONS
6030cs
Type: 6-1/2" (160mm)
2-Way Component
Impedance:
2 Ohms
Power Handling,RMS: 90W
Power Handling,Peak: 270W
Frequency Response: 53Hz – 21kHz
Sensi
tivity (2.83V, 1m): 93dB
W
ARRANTY:
Re
ference Series speakers are warranted against defects.
T
he dur
a
t
ion of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity
®
car audio retailer can help you determine the length
of y
our warranty.To register your product,please visit www.infinitysystems.com.
Designed and engineered in the USA.Conception et design aux É.U.A.
A v
alid serial number is r
equir
ed f
or warranty coverage. Un numéro de série valable est exigé pour la couverture de la garantie.
Features,specifications and appearance are subject to change without notice.
Les disposi
t
ifs,
les car
ac
térist
iques e
t l’aspect sont sujets au changement sans communication préalable.
Harman Consumer Group, Inc., 8500 Balboa Blvd., Northridge, CA 91329 11797 USA
www.infinitysystems.com
© 2009 Harman International Industries, Incorporated.All rights reserved.Tous droits réservés.• Part No. REF6030CSOM4/09
Infinity is a trademark of Harman International Industries,Incorporated, registered in the United States and/or other countries.
I-Mount is a trademark of Harman International Industries,Incorporated.
Infini
ty est une mar
que commerciale de Harman International Industries, Incorporated,déposée aux États-Unis et/ou dans d’autres pays.
I-Mount est une marque commerciale de Harman International Industries, Incorporated.
1x
1
2x 4x 4x 4x 2x 2x 8x
2x2x 2x 2x 2x
1
2
4
3
1
2
3
1
2
3
2x2x2x 2x2x2x
ROTATING TWEETER
This component system includes the
I-Mount
™
f
ea
t
ur
e,
an extr
emely versatile
tweeter-mounting system, which is designed
to allow the tweeter to be aimed toward the
list
ening posi
tion.Since the tweeter’s output
becomes directional at extremely high
fr
equencies,
aiming the tw
ee
t
er t
oward the
listening position will improve high-frequency
r
esponse and stereo imaging. Refer to
the mount
ing diagr
ams.
With the tweeter
mounted in the proper location,rock the
tweeter element in the slot and rotate the
entire assembly to aim the tweeter toward
the list
ening posi
tion.Secure the small nut
t
o lock the angle, then tighten the large hand
n
ut to lock the rotational position.
ROTATING TWEETER
T
his component syst
em includes the
I-Mount
™
feature,an extremely versatile
tweeter-mounting system, which is designed
t
o allo
w the tw
ee
ter to be aimed toward the
listening position.Since the tweeter’s output
becomes directional at extremely high
frequencies,aiming the tweeter toward the
list
ening posi
tion will improve high-frequency
response and stereo imaging. Refer to
the mounting diagrams.With the tweeter
mount
ed in the pr
oper location, rock the
tweeter element in the slot and rotate the
ent
ir
e assembl
y t
o aim the tweeter toward
the list
ening posi
t
ion.
Secur
e the small nut
to lock the angle,then tighten the large hand
nut to lock the rotational position.
RO
T
A
TING
TWEETER
This component system includes the
I-Mount
™
f
ea
ture,an extremely versatile
tw
ee
t
er-mounting system, which is designed
to allow the tweeter to be aimed toward the
listening position.Since the tweeter’s output
becomes directional at extremely high
frequencies,aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging. Refer to
the mounting diagrams.With the tweeter
mount
ed in the pr
oper location, rock the
tw
ee
t
er element in the slo
t and rotate the
entire assembly to aim the tweeter toward
the listening position.Secure the small nut
to lock the angle,then tighten the large hand
nut to lock the rotational position.
ROTATING TWEETER
T
his component syst
em includes the
I-Mount
™
f
ea
t
ure,an extremely versatile
tweeter-mounting system, which is designed
to allow the tweeter to be aimed toward the
list
ening posi
t
ion.
Since the tw
ee
t
er’
s output
becomes directional at extremely high
frequencies,aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging. Refer to
the mount
ing diagr
ams.With the tweeter
mount
ed in the pr
oper loca
tion,rock the
tweeter element in the slot and rotate the
entire assembly to aim the tweeter toward
the list
ening posi
t
ion.
Secur
e the small nu
t
to lock the angle,then tighten the large hand
nut to lock the rotational position.
ROTATING TWEETER
This component system includes the
I-Mount
™
f
ea
t
ur
e,
an extr
emely versatile
tweeter-mounting system, which is designed
to allow the tweeter to be aimed toward the
list
ening posi
tion.Since the tweeter’s output
becomes directional at extremely high
fr
equencies,
aiming the tw
ee
t
er t
oward the
listening position will improve high-frequency
r
esponse and stereo imaging. Refer to
the mount
ing diagr
ams.
With the tweeter
mounted in the proper location,rock the
tweeter element in the slot and rotate the
entire assembly to aim the tweeter toward
the list
ening posi
tion.Secure the small nut
t
o lock the angle, then tighten the large hand
n
ut to lock the rotational position.
ROTATING TWEETER
T
his component syst
em includes the
I-Mount
™
feature,an extremely versatile
tweeter-mounting system, which is designed
t
o allo
w the tw
ee
ter to be aimed toward the
listening position.Since the tweeter’s output
becomes directional at extremely high
frequencies,aiming the tweeter toward the
list
ening posi
tion will improve high-frequency
response and stereo imaging. Refer to
the mounting diagrams.With the tweeter
mount
ed in the pr
oper location, rock the
tweeter element in the slot and rotate the
ent
ir
e assembl
y t
o aim the tweeter toward
the list
ening posi
t
ion.
Secur
e the small nut
to lock the angle,then tighten the large hand
nut to lock the rotational position.
RO
T
A
TING
TWEETER
This component system includes the
I-Mount
™
f
ea
ture,an extremely versatile
tw
ee
t
er-mounting system, which is designed
to allow the tweeter to be aimed toward the
listening position.Since the tweeter’s output
becomes directional at extremely high
frequencies,aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging. Refer to
the mounting diagrams.With the tweeter
mount
ed in the pr
oper location, rock the
tw
ee
t
er element in the slo
t and rotate the
entire assembly to aim the tweeter toward
the listening position.Secure the small nut
to lock the angle,then tighten the large hand
nut to lock the rotational position.
ROTATING TWEETER
T
his component syst
em includes the
I-Mount
™
f
ea
t
ure,an extremely versatile
tweeter-mounting system, which is designed
to allow the tweeter to be aimed toward the
list
ening posi
t
ion.
Since the tw
ee
t
er’
s output
becomes directional at extremely high
frequencies,aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging. Refer to
the mount
ing diagr
ams.With the tweeter
mount
ed in the pr
oper loca
tion,rock the
tweeter element in the slot and rotate the
entire assembly to aim the tweeter toward
the list
ening posi
t
ion.
Secur
e the small nu
t
to lock the angle,then tighten the large hand
nut to lock the rotational position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tw
eeter-level switch.The normal setting for
this swi
tc
h is the “0dB” position,which pro-
vides an apparently “flat”response.Tweeter
output may be increased according to the
user’
s pr
e
f
er
ence,
or to compensate for off-
axis placement (where the speaker does not
directly face the listening position),by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
T
his speaker syst
em is equipped wi
th a
tw
ee
t
er
-le
v
el switch.The normal setting for
this switch is the “0dB” position,which pro-
vides an apparently “flat”response.Tweeter
output may be increased according to the
user’s preference,or to compensate for off-
axis placement (w
here the speaker does not
dir
ectly face the listening position),by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this swi
tch is the “0dB” position,which pro-
vides an apparently “flat”response.Tweeter
ou
tpu
t ma
y be increased according to the
user’
s pr
e
f
erence,or to compensate for off-
axis placement (where the speaker does not
directly face the listening position),by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
T
his speaker syst
em is equipped wi
th a
tweeter-level switch.The normal setting for
this switch is the “0dB” position,which pro-
vides an apparently “flat”response.Tweeter
output may be increased according to the
user’s preference,or to compensate for off-
axis placement (where the speaker does not
directly face the listening position),by set-
t
ing the swi
tc
h to the “+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tw
eeter-level switch.The normal setting for
this swi
tc
h is the “0dB” position,which pro-
vides an apparently “flat”response.Tweeter
output may be increased according to the
user’
s pr
e
f
er
ence,
or to compensate for off-
axis placement (where the speaker does not
directly face the listening position),by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
T
his speaker syst
em is equipped wi
th a
tw
ee
t
er
-le
v
el switch.The normal setting for
this switch is the “0dB” position,which pro-
vides an apparently “flat”response.Tweeter
output may be increased according to the
user’s preference,or to compensate for off-
axis placement (w
here the speaker does not
dir
ectly face the listening position),by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this swi
tch is the “0dB” position,which pro-
vides an apparently “flat”response.Tweeter
ou
tpu
t ma
y be increased according to the
user’
s pr
e
f
erence,or to compensate for off-
axis placement (where the speaker does not
directly face the listening position),by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
T
his speaker syst
em is equipped wi
th a
tweeter-level switch.The normal setting for
this switch is the “0dB” position,which pro-
vides an apparently “flat”response.Tweeter
output may be increased according to the
user’s preference,or to compensate for off-
axis placement (where the speaker does not
directly face the listening position),by set-
t
ing the swi
tc
h to the “+3dB” position.
TWEETER-LEVEL
CONTROL
T
his speaker syst
em is equipped wi
th a
tweeter-level switch.The normal setting for
this swi
tch is the “0dB” position,which pro-
vides an appar
entl
y
“f
lat”response.Tweeter
output may be increased according to the
user’s preference,or to compensate for off-
axis placement (where the speaker does not
dir
ec
tl
y face the listening position),by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
T
his speaker system is equipped with a
tweeter-level switch.The normal setting for
this swi
tch is the “0dB” position,which pro-
vides an appar
ently “flat” response.Tweeter
output may be increased according to the
user’s preference,or to compensate for off-
axis placement (where the speaker does not
directly face the listening position),by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this swi
tc
h is the
“0dB”position,which pro-
vides an apparently “flat”response.Tweeter
output may be increased according to the
user’
s pr
e
f
er
ence,
or to compensate for off-
axis placement (where the speaker does not
directly face the listening position),by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
T
his speaker syst
em is equipped wi
th a
tweeter-level switch.The normal setting for
this switch is the “0dB” position,which pro-
vides an apparently “flat”response.Tweeter
output may be increased according to the
user’s preference,or to compensate for off-
axis placement (where the speaker does not
directly face the listening position),by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this switch is the “0dB” position,which pro-
vides an appar
entl
y “flat” response.Tweeter
ou
tpu
t ma
y be increased according to the
user’
s pr
e
f
erence,or to compensate for off-
axis placement (where the speaker does not
directly face the listening position),by set-
t
ing the swi
tc
h t
o the
“+3dB”
posi
t
ion.
TWEETER-LEVEL
CONTROL
T
his speaker syst
em is equipped wi
th a
tweeter-level switch.The normal setting for
this switch is the “0dB” position,which pro-
vides an appar
entl
y
“f
la
t”
r
esponse.Tweeter
output may be increased according to the
user’s preference,or to compensate for off-
axis placement (where the speaker does not
directly face the listening position),by set-
t
ing the swi
tch to the “+3dB”position.
ROTATING TWEETER
T
his component syst
em includes the
I-Mount
™
(pa
t
ent no.
5,859,917) f
eature,
an extremely versatile tweeter-mounting
system,which is designed to allow the
tw
ee
t
er t
o be aimed t
o
w
ard the list
ening
position.Since the tweeter’s output becomes
directional at extremely high frequencies,
aiming the tw
eeter toward the listening
position will improve high-frequency
r
esponse and st
ereo imaging.Refer to
the mount
ing diagr
ams.
W
i
th the tweeter
mounted in the proper location,rock the
tweeter element in the slot and rotate the
entire assembly to aim the tweeter toward
the listening position.Secure the small nut
to lock the angle,then tighten the large
hand nut to lock the rotational position.
RO
TATING TWEETER
This component system includes the
I-Mount
™
feature,an extremely versatile
tweeter-mounting system, which is designed
to allow the tweeter to be aimed toward the
listening position.Since the tweeter’s output
becomes directional at extremely high
fr
equencies, aiming the tweeter toward the
list
ening posi
t
ion will improve high-frequency
response and stereo imaging. Refer to
the mounting diagrams.With the tweeter
mounted in the proper location,rock the
tw
ee
t
er element in the slo
t and r
o
t
a
te the
entire assembly to aim the tweeter toward
the listening position.Secure the small nut
t
o lock the angle, then tighten the large hand
nut to lock the rotational position.
RO
TATING TWEETER
T
his component syst
em includes the
I-Mount
™
feature,an extremely versatile
tweeter-mounting system, which is designed
to allow the tweeter to be aimed toward the
listening position.Since the tweeter’s output
becomes dir
ectional at extremely high
fr
equencies,
aiming the tw
eeter toward the
listening position will improve high-frequency
response and stereo imaging. Refer to
the mount
ing diagr
ams.
W
i
th the tw
ee
ter
mounted in the proper location,rock the
tweeter element in the slot and rotate the
entire assembly to aim the tweeter toward
the listening position.Secure the small nut
t
o loc
k the angle, then tighten the large hand
nu
t t
o loc
k the rotational position.
ROTATING TWEETER
T
his component syst
em includes the
I-Mount
™
f
ea
t
ur
e, an extremely versatile
tweeter-mounting system, which is designed
to allow the tweeter to be aimed toward the
list
ening posi
t
ion.
Since the tw
ee
t
er’
s output
becomes directional at extremely high
frequencies,aiming the tweeter toward the
list
ening position will improve high-frequency
response and stereo imaging. Refer to
the mount
ing diagr
ams.With the tweeter
mount
ed in the pr
oper loca
t
ion,
rock the
tweeter element in the slot and rotate the
entire assembly to aim the tweeter toward
the listening position.Secure the small nut
to lock the angle,then tighten the large hand
nut to lock the rotational position.
ROTATING TWEETER
This component system includes the
I-Mount
™
feature,an extremely versatile
tweeter-mounting system, which is designed
to allow the tweeter to be aimed toward the
listening position.Since the tweeter’s output
becomes directional at extremely high
frequencies,aiming the tweeter toward the
list
ening position will improve high-frequency
r
esponse and st
er
eo imaging. Refer to
the mounting diagrams.With the tweeter
mounted in the proper location,rock the
tweeter element in the slot and rotate the
ent
ir
e assembl
y t
o aim the tw
ee
t
er t
oward
the listening position.Secure the small nut
to lock the angle,then tighten the large hand
nu
t to lock the rotational position.
ROTATING TWEETER
This component system includes the
I-Mount
™
f
ea
t
ur
e,
an extr
emel
y versatile
tweeter-mounting system, which is designed
to allow the tweeter to be aimed toward the
listening position.Since the tweeter’s output
becomes directional at extremely high
fr
equencies, aiming the tweeter toward the
list
ening posi
t
ion will improve high-frequency
response and stereo imaging. Refer to
the mounting diagrams.With the tweeter
mount
ed in the pr
oper loca
t
ion,
r
oc
k the
tweeter element in the slot and rotate the
entire assembly to aim the tweeter toward
the listening position.Secure the small nut
to lock the angle,then tighten the large hand
nu
t t
o lock the rotational position.
-
1
-
2
Infinity 6030CS 6-1/2" car speakers deliver exceptional sound quality with their 2-way component system, handling up to 90W RMS and 270W peak power. Experience a wide frequency range from 53Hz to 21kHz with 93dB sensitivity, ideal for various music genres. The adjustable tweeter level control allows you to fine-tune the sound to your preference, compensating for off-axis placement if needed.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Canon DR-6030C User manual
-
JBL P660C User manual
-
Fostex FT7RP User manual
-
A2 6030CSL-AW Operating instructions
-
-
-
-
Earthquake Sound Image-X Wall Speakers Owner's manual
-
-
