2. Computers & electronics
  3. Computers
  4. Thin clients
  5. DT Research
  6. SA1360
SA1360

DT Research SA1360 User guide

  • Hello! I am an AI chatbot trained to assist you with the DT Research SA1360 User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ENGLISH
Signage Appliance
BASIC OPERATION GUIDE
SA1360
INTRODUCTION
Thank you for acquiring the SA1360, a Signage
Appliance by DT Research. The DT Research
Signage Appliance facilitates the creaon of
a unique and powerful communicaon medium that offers unparalleled opportunies to
capture an audience
’
s aenon at key decision-making locaons. The SA1360 enables efficient
deployment for digital signage, featuring reliable, energy-efficient hardware and intuive server-
based soware. The Microso® Windows® based SA1360 offers remote management of the
hardware and the displayed content with the WebDT Content Manager soware. The SA1360
together with the WebDT soware, offers an efficient soluon for delivering and managing
messages that target audiences in the right place, at the right me.
Package Contents
One 1. DT Research Signage Appliance
SA1360
Soware and User Guide (including 2.
WebDT Content Manager, and user
guides on Soware Disk)
AC/DC Power Adapter3.
Basic Operaon Guide4.
N
OTE: The actual package contents may vary
depending on the configuraon acquired.
Content Manager
1
2 3
SA1360
signage dtri com
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131 hp://www.dtresearch.com hp://www.signage.dtri.com
Copyright © 2012, DT Research, Inc. All Rights Reserved. DT Research is a registered trademark of DT Research, Inc.
BOG022313SA1360ENG
Powering ON and OFF
The SA1360 is programmed to Power On automacally when power is first applied or re-
established. There is also a Power Buon, located on the front of the SA1360. To turn the SA1360
on, push and release the Power Buon on the front bezel. The power LED will be lit (blue), and
the corresponding interface will be shown on the display monitor.
To turn off the device, use the soware shutdown interface provided, or unplug the appliance.
In the event of system lockup, unplug or re-plug the power cable. Also, the Power Buon may
be used to perform a reset of the device. To do that, push and hold the Power Buon for at least
4 seconds. The system will shut down and all unsaved work may be lost. Pushing on the Power
Buon again will restart the device.
Server Installaon
Please refer to the corresponding User Guides for soware installaon instrucons.
Appliance Registraon
Aer turning on the SA1360 for the first me, a screen prompt
is displayed for registering the player. If the screen prompt is
not shown, please follow the instrucons below:
Press and hold
“
Control + Shi + Space
”
to exit the WCM 1.
Player soware.
Navigate to Start | Programs | DT Research | WCM Player2.
Select Register Player Again. The Player Registraon screen 3.
should appear. Fill in all fields to register. The required
informaon is marked.
Click OK to register and connect to the WebDT Signage 4.
Appliance Publish Server.
Memory and Storage
Depending on the base soware configuraon, the user may need only the internal flash memory
of the SA1360 for user
’
s installed soware and storage. The user may also supplement storage
space with USB-based peripherals such as flash disks, disk drives, etc.
Major Opons
Wi-Fi 802.11a/b/g/n networking with dipole antenna•
The SA1360 Signage Appliance
Rear ViewFront View
BA
C E F
D
HG
RS232 COM ports
USB 2.0 ports
Audio jacks
Power buon
G
H
A
D
B
E
C
DisplayPort++
DVI port
Ethernet ports
DC-in
F
/