Olivetti d-Color MF201 Owner's manual

Code 548009en

d-Color MF201

QUICK GUIDE

d-Color MF201

This manual is also available in color

PDF format on the CD-ROM provided

.

PUBLICATION ISSUED BY:

Olivetti S.p.A.

Gruppo Telecom Italia

Via Jervis, 77 - 10015 Ivrea (ITALY)

www.olivetti.com

The manufacturer reserves the right to carry out modifications to the product described in this manual at any time

and without any notice.

ENERGY STAR is a U.S. registered mark.

The ENERGY STAR program is an energy reduction plan introduced by theUnited States Environmental Protection

Agency in response to environmental issues and for the purpose of advancing the development and utilization of

more energy efficient office equipment.

Your attention is drawn to the following actions which could compromise the conformity attested to above, as well as

the characteristics of the product:

• incorrect electrical power supply;

• incorrect installation, incorrect or improper use or use not in compliance with the warnings provided in the

User’s Manual supplied with the product;

• replacement of original components or accessories with others of a type not approved by the manufacturer, or

performed by unauthorised personnel.

electronic or mechanical, including photocopying, recording or by any information storage and retrieval

system, without permission in writing from the Publisher.

The mark affixed to the product certifies that the

product satisfies the basic quality requirements.

d-Color MF201 Contents-1

Contents

1 Introduction

1.1 Energy Star®.................................................................................................................................... 1-3

1.2 Safety information........................................................................................................................... 1-4

1.3 Regulation notices ........................................................................................................................ 1-10

1.4 Caution notations and labels ....................................................................................................... 1-15

1.5 Special notice to user ................................................................................................................... 1-16

1.6 Space requirements...................................................................................................................... 1-17

1.7 Operation precautions .................................................................................................................. 1-18

1.8 Legal restrictions on copying....................................................................................................... 1-19

1.9 Explanation of manual conventions ............................................................................................ 1-20

1.10 Introduction to the user manuals................................................................................................. 1-22

1.11 Available features.......................................................................................................................... 1-23

1.12 Control panel ................................................................................................................................. 1-25

1.13 Turning the machine on/off .......................................................................................................... 1-27

1.14 Loading paper................................................................................................................................ 1-29

1.15 Clearing paper misfeeds............................................................................................................... 1-38

1.16 Replacing consumables ............................................................................................................... 1-42

1.17 Options ........................................................................................................................................... 1-50

2 Basic operations

2.1 Basic copy operation ...................................................................................................................... 2-3

2.2 Basic print operation....................................................................................................................... 2-6

2.3 Basic fax operation ....................................................................................................................... 2-10

2.4 Basic scan operation .................................................................................................................... 2-13

3 Useful copy operations

3.1 Reducing paper use while copying................................................................................................ 3-3

3.2 Printing copies enlarged/reduced on paper with a different size .............................................. 3-7

3.3 Copying onto envelopes ................................................................................................................. 3-9

3.4 Easily recalling frequently used functions .................................................................................. 3-12

3.5 Checking the number of prints .................................................................................................... 3-15

3.6 Reducing electricity usage........................................................................................................... 3-17

4 Useful printing operations

4.1 Selecting the paper ......................................................................................................................... 4-3

4.2 Managing and limiting printing ...................................................................................................... 4-6

4.3 Reducing paper use while printing ................................................................................................ 4-7

4.4 Adjusting the print position ............................................................................................................ 4-8

4.5 Adding text and images when printing.......................................................................................... 4-9

4.6 Adjusting the image quality.......................................................................................................... 4-10

4.7 Using printer fonts......................................................................................................................... 4-11

5 Useful fax operations

5.1 Registering frequently used fax numbers..................................................................................... 5-3

5.2 Checking fax operations performed until now ............................................................................. 5-9

5.3 Transmitting to multiple recipients at the same time ................................................................ 5-11

5.4 Selecting registered transmission source information ............................................................. 5-15

5.5 Scanning the originals to be sent ................................................................................................ 5-17

Contents-2 d-Color MF201

5.6 Sending documents with a command from the recipient.......................................................... 5-19

5.7 Reducing communication costs................................................................................................... 5-21

5.8 Reducing communication costs (using the Internet/Intranet) .................................................. 5-23

5.9 Sending originals by e-mail .......................................................................................................... 5-25

5.10 Reducing printing costs................................................................................................................ 5-27

5.11 Sending confidential documents.................................................................................................. 5-30

5.12 Forwarding received data ............................................................................................................. 5-32

5.13 Faxing data directly from a computer ......................................................................................... 5-33

5.14 Registering one-touch destinations from a computer............................................................... 5-34

6 Useful network scan operations

6.1 Registering frequently used destinations...................................................................................... 6-3

6.2 Transmitting fine text and clean images ....................................................................................... 6-9

6.3 Transmitting with the selected color and file type settings ...................................................... 6-13

6.4 Transmitting with the background color adjusted ..................................................................... 6-15

6.5 Transmitting to multiple recipients .............................................................................................. 6-17

6.6 Sending documents by e-mail...................................................................................................... 6-20

6.7 Checking transmissions performed until now............................................................................ 6-23

7 Troubleshooting

8 User Settings parameters

8.1 Displaying the User Settings screen.............................................................................................. 8-3

8.2 Settings that can be specified........................................................................................................ 8-4

9 Appendix

9.1 Trademarks and copyrights............................................................................................................ 9-3

9.2 Software license agreement......................................................................................................... 9-26

10 Index

1

Introduction

d-Color MF201 1-3

Introduction

1

1 Introduction

This Quick Guide – Copy/Print/Fax/Scan Operations uses illustrations to describe operating procedures for

the most commonly used functions in an easy-to-understand way.

Start by using this manual to become proficient with the useful functions that this machine offers.

For details on the various functions, refer to the user manuals on the software DVD included with this

machine.

In order to operate the machine safely and properly, be sure to read the safety information on page 1-4 of

this manual before use.

For descriptions on trademarks and copyrights, refer to page 9-3 of this manual.

In addition, this manual contains the following information. Be sure to read the manual before using the

machine.

- Items that must be observed to use the machine safely

- Information regarding product safety

- Precautions when using the machine

The illustrations used in this manual may appear slightly different from views of the actual equipment.

1.1 Energy Star®

As an ENERGY STAR

®

Partner, we have determined that this machine meets the ENERGY STAR

®

Guidelines

for energy efficiency.

What is an ENERGY STAR® Product?

An ENERGY STAR

®

product has a special feature that allows it to automatically switch to a "low-power

mode" after a period of inactivity. An ENERGY STAR

®

product uses energy more efficiently, saves you money

on utility bills and helps protect the environment.

1

Introduction

1-4 d-Color MF201

1.2 Safety information

This section contains detailed instructions on the operation and maintenance of this machine. To achieve

optimum utility of this device, all operators should carefully read and follow the instructions in this manual.

Please read the following section before connecting the machine to the supply. It contains important

information related to user safety and preventing equipment problems.

Please keep this manual in a handy place near the machine.

Make sure you observe all of the precautions appear in each section of this manual.

2

Note

Some parts of the contents of this section may not correspond with the purchased product.

Warning and precaution symbols

The following indicators are used on the warning labels or in this manual to categorize the level of safety

warnings.

7

WARNING

Ignoring these warnings could cause serious injury or even death.

% Do not ignore these safety advices.

7

CAUTION

Ignoring this cautions could cause injury or damage to property.

% Do not ignore these safety advices.

Meaning of symbols

Disassemble and modification

7

WARNING

Ignoring these warnings could cause serious injury or even death.

% Do not ignore these safety advices.

Symbol Meaning Example Meaning

A triangle indicates a danger against

which you should take precaution.

This symbol warns against possible

causes of burns.

A diagonal line indicates a prohibited

course of action.

This symbol warns against dismantling

the device.

A solid circle indicates an imperative

course of action.

This symbol indicates you must unplug

the device.

Warning Symbol

• Do not attempt to remove the covers and panels which have been fixed to the product.

Some products have a high-voltage part or a laser beam source inside that could

cause an electrical shock or blindness.

• Do not modify this product, as a fire, electrical shock, or breakdown could result. If the

product employs a laser, the laser beam source could cause blindness.

d-Color MF201 1-5

Introduction

1

Power cord

7

WARNING

Ignoring these warnings could cause serious injury or even death.

% Do not ignore these safety advices.

Power source

7

WARNING

Ignoring these warnings could cause serious injury or even death.

% Do not ignore these safety advices.

7

CAUTION

Ignoring this cautions could cause injury or damage to property.

% Do not ignore these safety advices.

Warning Symbol

• Use only the power cord supplied in the package. If a power cord is not supplied, only

use the power cord and plug that is specified in POWER CORD INSTRUCTION. Failure

to use this cord could result in a fire or electrical shock.

• Use the power cord supplied in the package only for this machine and NEVER use it

for any other product. Failure to observe this precaution could result in a fire or elec-

trical shock.

• Do not scratch, abrade, place a heavy object on, heat, twist, bend, pull on, or damage

the power cord. Use of a damaged power cord (exposed core wire, broken wire, etc.)

could result in a fire or breakdown.

Should any of these conditions be found, immediately turn OFF the power switch, un-

plug the power cord from the power outlet, and then call your authorized service rep-

resentative.

Warning Symbol

• Use only the specified power source voltage. Failure to do that could result in a fire or

electrical shock.

• Connect power plug directly into wall outlet having the same configuration as the plug.

Use of an adapter leads to the product connecting to inadequate power supply (volt-

age, current capacity, grounding), and may result in fire or shock. If proper wall outlet

is not available, the customer shall ask qualified electrician for the installation.

• Do not use a multiple outlet adapter nor an extension cord in principle. Use of an

adapter or an extension cord could cause a fire or electrical shock.

Contact your authorized service representative if an extension cord is required.

• Consult your authorized service representative before connecting other equipment on

the same wall outlet. Overload could result in a fire.

Caution Symbol

• The outlet must be near the equipment and easily accessible. Otherwise you can not

pull out the power plug when an emergency occurs.

1

Introduction

1-6 d-Color MF201

Power plug

7

WARNING

Ignoring these warnings could cause serious injury or even death.

% Do not ignore these safety advices.

7

CAUTION

Ignoring this cautions could cause injury or damage to property.

% Do not ignore these safety advices.

Grounding

7

WARNING

Ignoring these warnings could cause serious injury or even death.

% Do not ignore these safety advices.

Warning Symbol

• Do not unplug and plug in the power cord with a wet hand, as an electrical shock could

result.

• Plug the power cord all the way into the power outlet. Failure to do this could result in

a fire or electrical shock.

Caution Symbol

• Do not tug the power cord when unplugging. Pulling on the power cord could damage

the cord, resulting in a fire or electrical shock.

• Remove the power plug from the outlet more than one time a year and clean the area

between the plug terminals. Dust that accumulates between the plug terminals may

cause a fire.

Warning Symbol

• Connect the power cord to an electrical outlet that is equipped with a grounding ter-

minal.

d-Color MF201 1-7

Introduction

1

Installation

7

WARNING

Ignoring these warnings could cause serious injury or even death.

% Do not ignore these safety advices.

7

CAUTION

Ignoring this cautions could cause injury or damage to property.

% Do not ignore these safety advices.

Ventilation

7

CAUTION

Ignoring this cautions could cause injury or damage to property.

% Do not ignore these safety advices.

Warning Symbol

• Do not place a flower vase or other container that contains water, or metal clips or oth-

er small metallic objects on this product. Spilled water or metallic objects dropped in-

side the product could result in a fire, electrical shock, or breakdown.

Should a piece of metal, water, or any other similar foreign matter get inside the prod-

uct, immediately turn OFF the power switch, unplug the power cord from the power

outlet, and then call your authorized service representative.

Caution Symbol

• After installing this product, mount it on a secure base. If the unit moves or falls, it may

cause personal injury.

• Do not place the product in a dusty place, or a site exposed to soot or steam, near a

kitchen table, bath, or a humidifier. A fire, electrical shock, or breakdown could result.

• Do not place this product on an unstable or tilted bench, or in a location subject to a

lot of vibration and shock. It could drop or fall, causing personal injury or mechanical

breakdown.

• Do not let any object plug the ventilation holes of this product. Heat could accumulate

inside the product, resulting in a fire or malfunction.

• Do not use flammable sprays, liquids, or gases near this product, as a fire could result.

Caution Symbol

• Always use this product in a well ventilated location. Operating the product in a poorly

ventilated room for an extended period of time could injure your health. Ventilate the

room at regular intervals.

1

Introduction

1-8 d-Color MF201

Actions in response to troubles

7

WARNING

Ignoring these warnings could cause serious injury or even death.

% Do not ignore these safety advices.

7

CAUTION

Ignoring this cautions could cause injury or damage to property.

% Do not ignore these safety advices.

Consumables

7

WARNING

Ignoring these warnings could cause serious injury or even death.

% Do not ignore these safety advices.

7

CAUTION

Ignoring this cautions could cause injury or damage to property.

% Do not ignore these safety advices.

Warning Symbol

• Do not keep using this product, if this product becomes inordinately hot or emits

smoke, or unusual odor or noise. Immediately turn OFF the power switch, unplug the

power cord from the power outlet, and then call your authorized service representative.

If you keep on using it as is, a fire or electrical shock could result.

• Do not keep using this product, if this product has been dropped or its cover damaged.

Immediately turn OFF the power switch, unplug the power cord from the power outlet,

and then call your authorized service representative. If you keep on using it as is, a fire

or electrical shock could result.

Caution Symbol

• The inside of this product has areas subject to high temperature, which may cause

burns.

When checking the inside of the unit for malfunctions such as a paper misfeed, do not

touch the locations (around the fusing unit, etc.) which are indicated by a "Caution

HOT" caution label.

Warning Symbol

• Do not throw the toner cartridge or toner into an open flame. The hot toner may scatter

and cause burns or other damage.

Caution Symbol

• Do not leave a toner unit or drum unit in a place within easy reach of children. Licking

or ingesting any of these things could injure your health.

• Do not store toner units and PC drum units near a floppy disk or watch that are sus-

ceptible to magnetism. They could cause these products to malfunction.

d-Color MF201 1-9

Introduction

1

When moving the machine

7

CAUTION

Ignoring this cautions could cause injury or damage to property.

% Do not ignore these safety advices.

Before successive holidays

When the optional Fax Kit FK-507 is not installed:

7

CAUTION

Ignoring this cautions could cause injury or damage to property.

% Do not ignore these safety advices.

Caution Symbol

• Whenever moving this product, be sure to disconnect the power cord and other ca-

bles. Failure to do this could damage the cord or cable, resulting in a fire, electrical

shock, or breakdown.

• When moving this product, always hold it by the locations specified in the user manual

or other documents. If the unit falls it may cause severe personal injury. The product

may also be damaged or malfunction.

Caution Symbol

• Unplug the product when you will not use the product for long periods of time.

1

Introduction

1-10 d-Color MF201

1.3 Regulation notices

CE Marking (Declaration of Conformity) for users of the European Union (EU)

This product complies with the following EU directives:

2006/95/EC, 2004/108/EC and 1999/5/EC directives.

This declaration is valid for the area of the European Union.

This device must be used with a shielded network cable. The use of non-shielded cables is likely to result in

interference with radio communications and is prohibited under CISPR rules and local rules.

Optional Authentication Unit AU-201 (IC Card Reader/Writer):

This product is wireless system equipment (Short-Range Device) which the R & TTE directive (1999/5/EC)

covers. Frequency of operation is 13.56 MHz.

User Instructions FCC Part 15 - Radio Frequency Devices (for U.S.A. users)

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to

Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference when the equipment

is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause

harmful interference in which case the user will be required to correct the interference at his own expense.

7

WARNING

The design and production of this unit conform to FCC regulations, and any changes or modifications

must be registered with the FCC and are subject to FCC control.

Any changes made by the purchaser or user without first contacting the manufacturer will be subject to

penalty under FCC regulations.

% This device must be used with a shielded network cable. The use of non-shielded cables is likely to

result in interference with radio communications and is prohibited under FCC rules.

Interference-Causing Equipment Standard (ICES-003 ISSUE 4) (for Canada users)

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

For users in countries not subject to class B regulations

7

WARNING

Interference with radio communications:

% This is a Class A product. In a domestic environment this product may cause radio interference in which

case the user may be required to take adequate measures.

% This device must be used with a shielded network cable. The use of non-shielded cables is likely to

result in interference with radio communications and is prohibited under CISPR rules and local rules.

Laser safety

This is a digital machine which operates using a laser. There is no possibility of danger from the laser provided

the machine is operated according to the instructions in this manual.

Since radiation emitted by the laser is completely confined within protective housing, the laser beam cannot

escape from the machine during any phase of user operation.

This machine is certified as a Class 1 laser product: This means the machine does not produce hazardous

laser radiation.

d-Color MF201 1-11

Introduction

1

Internal laser radiation

7

WARNING

This product employs a Class 3B laser diode that emits an invisible laser beam.

% The laser diode and the scanning polygon mirror are incorporated in the print head unit.

% The print head unit is NOT A FIELD SERVICE ITEM:

Therefore, the print head unit should not be opened under any circumstances.

CDRH regulations

This machine is certified as a Class 1 Laser product under Radiation Performance Standard according to the

Food, Drug and Cosmetic Act of 1990. Compliance is mandatory for Laser products marketed in the United

States and is reported to the Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug

Administration of the U.S. Department of Health and Human Services (DHHS). This means that the device

does not produce hazardous laser radiation.

The label shown on page 1-13 indicates compliance with the CDRH regulations and must be attached to

laser products marketed in the United States.

7

CAUTION

Use of controls, adjustments or performance of procedures other than those specified in this manual

may result in hazardous radiation exposure.

% This is a semiconductor laser. The maximum power of the laser diode is 15 mW and the wavelength is

775-800 nm.

Specification

Maximum average radiation power 6.4 W at the laser aperture of the print head unit

Wavelength 775-800 nm

Print Head

Laser Aperture of

the Print Head Unit

1

Introduction

1-12 d-Color MF201

For European users

7

CAUTION

Use of controls, adjustments or performance of procedures other than those specified in this manual

may result in hazardous radiation exposure.

% This is a semiconductor laser. The maximum power of the laser diode is 15 mW and the wavelength is

775-800 nm.

For Denmark users

7

ADVARSEL

Dette er en halvlederlaser.

% Usynlig laserstråling ved åbning, når sikkerhedsafbrydere er ude af funktion. Undgå udsættelse for

stråling. Klasse 1 laser produkt der opfylder IEC 60825 sikkerheds kravene.

Dette er en halvlederlaser. Laserdiodens højeste styrke er 15 mW og bølgelængden er 775-800 nm.

For Finland, Sweden users

LOUKAN 1 LASERLAITE

KLASS 1 LASER APPARAT

7

VAROITUS

Tämä on puolijohdelaser.

% Laitteen Käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän

turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle.

Tämä on puolijohdelaser. Laserdiodin sunrin teho on 15 mW ja aallonpituus on 775-800 nm.

7

VARNING

Det här är en halvledarlaser.

% Om apparaten används på annat sätt än i denna bruksanvisning specificerats, kan användaren utsättas

för osynlig laserstrålning, som överskrider gränsen för laserklass 1.

Det här är en halvledarlaser. Den maximala effekten för laserdioden är 15 mW och våglängden är 775-800 nm.

7

VAROITUS

Avattaessa ja suojalukitus ohitettaessa olet alttiina näkymättömälle lasersäteilylle.

% Älä katso säteeseen.

7

VARNING

Osynlig laserstrålning när denna del är öppnad och spärren är urkopplad.

% Betrakta ej strålen.

d-Color MF201 1-13

Introduction

1

For Norway users

7

ADVARSEL!

Dette en halvleder laser.

% Dersom apparatet brukes på annen måte enn spesifisert i denne bruksanvisning, kan brukeren utsettes

for unsynlig laserstråling som overskrider grensen for laser klass 1.

Dette en halvleder laser. Maksimal effekt till laserdiode er 15 mW og bølgelengde er 775-800 nm.

Laser safety label

A laser safety label is attached to the outside of the machine, as shown below.

Only for the U.S.A.

1

Introduction

1-14 d-Color MF201

Ozone release

7

CAUTION

Locate the machine in a well ventilated room

% A negligible amount of ozone is generated during normal operation of this machine. An unpleasant odor

may, however, be created in poorly ventilated rooms during extensive machine operations. For a

comfortable, healthy, and safe operating environment, it is recommended that the room well ventilated.

7

ATTENTION

Placer l’appareil dans une pièce largement ventilée.

% Une quantité d’ozone négligable est dégagée pendant le fonctionnement de l’appareil quand celui-ci

est utilisé normalement. Cependant, une odeur désagréable peut être ressentie dans les pièces dont

l’aération est insuffisante et lorsque une utilisation prolongée de l’appareil est effectuée. Pour avoir la

certitude de travailler dans un environnement réunissant des conditions de confort, santé et de sécurité,

il est préférable de bien aérer la pièce ou se trouve l’appareil.

Acoustic noise (for European users only)

Maschinenlärminformations-Verordnung 3. GPSGV: Der höchste Schalldruckpegel beträgt 70 dB(A) oder

weniger gemäß EN ISO 7779.

For EU member states only

This symbol means: Do not dispose of this product together with

your household waste!

Please refer to the information of your local community or contact

our dealers regrading the proper handling of end-of-life electric and

electronic equipments. Recycling of this product will help to

conserve natural resources and prevent potential negative

consequences for the environment and human health caused by

inappropriate waste handling.

This product complies with RoHS (2002/95/EC) Directive.

This device is not intended for use at a video workstation in compliance with BildscharbV.

Das Gerät ist nicht für die Benutzung am Bildschirmarbeitsplatz gemäß BildscharbV vorgesehen.

d-Color MF201 1-15

Introduction

1

1.4 Caution notations and labels

Safety precaution notations and labels appear on this machine at the following positions.

Be very careful that an accident does not occur when operations such as removing paper misfeeds are

performed.

It is illegal to copy

certain types of

documents. Never

copy such documents.

Do not burn used

imaging units. Toner

expelled from the fire

is dangerous.

Do not burn used

toner cartridges.

Toner expelled from

the fire is dangerous.

CAUTION

The area around the

fusing unit is extremely

hot. Touching any part

other than those

indicated may result in

burns.

CAUTION

WARNING

Do not burn the used

waste-toner box.

Toner expelled from

the fire is dangerous.

CAUTION

Do not position the used

waste-toner box so that

it is standing on end or

tilted, otherwise toner

may spill.

WARNING

1

Introduction

1-16 d-Color MF201

1.5 Special notice to user

For Europe

The Facsimile has been approved in accordance with Council Decision 1999/5/ EC for pan-European single

terminal connection to the public switched telephone network (PSTN). However, due to differences between

the individual PSTNs provided in different countries, the approval does not, of itself, give an unconditional

assurance of successful operation on every PSTN network terminal point.

In the event of problems, you should contact your equipment

supplier in the first instance.

The CE marking must be affixed to the product or to its data plate.

Additionally it must be affixed to the packaging, if any, and to the

accompanying documents.

Page is loading ...

Olivetti d-Color MF201, d-Color MF201 plus Owner's manual

Related papers

Other documents