Sanyo VCC-P7574 - 1/4" Color CCD Indoor Mini Dome Camera User manual

Category
Security cameras
Type
User manual
INSTRUCTION MANUAL
Color CCD Camera
Please read this manual before installing and using this camera, and always
follow the instructions in it for proper use. Be sure to keep it handy for later
reference.
Refer to the supplied CD-ROM for the French, Spanish, German and Chinese
“INSTRUCTION MANUAL”.
To view the INSTRUCTION MANUAL contained in the supplied CD-ROM, you
need Adobe
®
Reader
®
application. If your PC has not been installed with it, you
can download it for installation from the following web site at Adobe Systems
Incorporated.
http://www.adobe.com
Consultez le CD-ROM fourni pour le « MANUEL DINSTRUCTIONS » en
français, espagnol, allemand et en chinois.
Pour visualiser le MANUEL D’INSTRUCTIONS contenu dans le CD-ROM
fourni, l’application Adobe
®
Reader
®
vous est nécessaire. Si votre ordinateur a
été installé sans cette application, vous pouvez la télécharger depuis le site
Web suivant d’Adobe Systems Incorporated.
http://www.adobe.com
Hacer referencia al CD-ROM que se suministra para consultar el “MANUAL DE
INSTRUCCIONES” en francés, español, alemán y chino.
Para ver el MANUAL DE INSTRUCCIONES contenido en el CD-ROM
suministrado, es necesario disponer de la aplicación Adobe
®
Reader
®
. Si el PC
no tiene instalada esta aplicación, es posible descargarla para la instalación en
el siguiente sitio web en Adobe Systems Incorporated.
http://www.adobe.com
Die “BEDIENUNGSANLEITUNG” in den Sprachen Französich, Spanisch,
Deutsch und Chinesisch finden Sie auf der mitgelieferten CD-ROM.
Zum Öffnen der BEDIENUNGSANLEITUNG auf der mitgelieferten CD-ROM
benötigen Sie das Programm Adobe
®
Reader
®
. Falls diese Anwendung nicht
auf Ihrem PC installiert ist, können Sie das Programm unter der nachstehend
angegebenen Internet-Adresse bei Adobe Systems Incorporated zur
Installation herunterladen:
http://www.adobe.com
请参阅随附的光盘以了解法语西班牙语德语中文 “说明手册”
要查看随附光盘中包含的说明手册,您需要安装 Adobe
®
Reader
®
应用程序。
如果您的
PC
上没有安装此应用程序,则您可以从
Adobe Systems Incorporated
以下网站下载并进行安装。
http://www.adobe.com
VDC-DP7584
VDC-DP7585P
VCC-P7574
VCC-P7575P
VDC-DP7584/VDC-DP7585P VCC-P7574/VCC-P7575P
L5BH2_BK2_US_XE(GB).book 1 ページ 2006年3月2日 木曜日 午後8時41分
1
Contents
The contents in angle brackets <> are the menu screen title.
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Useful Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
WEEE Symbol Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Accessing the Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
An Example for Basic Operation for Settings and Adjustments . . . 6
Selecting Display Language <LANGUAGE> . . . . . . . . . . . . . . . . . 8
Naming Cameras <TITLE> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Password Lock Setting/Cancelling <PASSWORD>. . . . . . . . . . . . 11
Adjusting Synchronization Error <SYNC> . . . . . . . . . . . . . . . . . . . 13
L-L SETTING (Line Lock). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Backlight Compensation <BLC> . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Adjusting Iris Level <IRIS> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Adjusting White Balance <WHITE BALANCE> . . . . . . . . . . . . . . . 16
AWC SETTING (One-Push Adjustment) . . . . . . . . . . . . . . . . . . . . 17
MWB SETTING (Manual White Balance) . . . . . . . . . . . . . . . . . . . 18
Setting Gain Value <AGC GAIN>. . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Correcting Gamma Characteristic <GAMMA> . . . . . . . . . . . . . . . . 20
Specifying Shutter Speed <SHUTTER> . . . . . . . . . . . . . . . . . . . . . 21
Accentuating Subject Outline <APERTURE>. . . . . . . . . . . . . . . . . 22
(VDC-DP7584/VDC-DP7585P)
Adjusting DAY/NIGHT Function <DAY/NIGHT> . . . . . . . . . . . . . . 23
DAY/NIGHT SETTING-AUTO . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
DAY/NIGHT SETTING-B/W (Black-and-white). . . . . . . . . . . . . . . 25
Hiding Partial Image <PRIVACY MASK>. . . . . . . . . . . . . . . . . . . . 26
Privacy Masking Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Specifying Alarm Input <ALARM>. . . . . . . . . . . . . . . . . . . . . . . . . 28
Motion Sensor Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
ZOOM setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
DURATION setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
ALARM SIGN setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Screen Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back page
Getting Started
Settings/Adjustments
For the customers in US and Canada
THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED
SERVICE PERSON AND SHOULD CONFORM TO ALL LOCAL
CODES.
L5BH2_BK2_US_XE(GB).book 1 ページ 2006年3月2日 木曜日 午後8時41分
2
Precautions
In case of a problem
Do not use the unit if smoke or a strange odor comes from the unit, or if it
seems not to function correctly. Turn off the power immediately and
disconnect the power cord, and then consult your dealer or an Authorized
Sanyo Service Center.
Do not open or modify
Do not open the cabinet, as it may be dangerous and cause damage to
the unit. For repairs, consult your dealer or an Authorized Sanyo Service
Center.
Do not put objects inside the unit
Make sure that no metal objects or flammable substance get inside the
unit. If used with a foreign object inside, it could cause a fire, a short-circuit
or damage. Be careful to protect the unit from rain, sea water, etc. If water
or liquid gets inside the unit, turn off the power immediately and disconnect
the power cord, and then consult your dealer or an Authorized Sanyo
Service Center.
Be careful when handling the unit
To prevent damage, do not drop the unit or subject it to strong shock or
vibration.
Do not install this unit close to magnetic fields
The magnetic fields may result in unstable operation.
Protect from humidity and dust
To prevent damage, do not install the unit where there is greasy smoke or
steam, where the humidity may get too high, or where there is a lot of dust.
Protect from high temperatures
Do not install close to stoves, or other heat sources, such as spotlights,
etc., or where it could be subject to direct sunlight, as this could cause
deformation, discoloration or other damage.
Be careful when installing close to the ceiling, in a kitchen or boiler room,
as the temperature may rise to high levels.
Cleaning
Dirt can be removed from the cabinet by wiping it with a soft cloth. To
remove stains, wipe with a soft cloth moistened with a soft detergent
solution and wrung dry, then dry by wiping with a soft cloth.
Do not use benzine, thinner or other chemical products on the cabinet,
as this may cause deformation and paint peeling. Before using a
chemical cloth, make sure to read all accompanying instructions. Make
sure that no plastic or rubber material comes into contact with the
cabinet for a long period of time, as this may cause damage or paint
peeling.
Approvals: IP66 (VDC-DP7584)
Approvals: IP66/CE (VDC-DP7585P)
This unit has been certified to IP66 standards when properly installed.
Use only an IP66 certified enclosure or an electrical box.
Ensure all openings in enclosure are sealed as per manufacturer's
instructions.
L5BH2_BK2_US_XE(GB).book 2 ページ 2006年3月2日 木曜日 午後8時41分
3
Information
MEMO:
This instruction manual covers four models. Any difference among the
four models is indicated when necessary.
This manual describes the menu screen for the VDC-DP7584.
Differences in the menu screen among the four models are as indicated
below.
Characteristics
Equipped with motorized zoom pan focus auto iris lens. Thanks to
its large depth of field, focused images can be obtained in a wider
range of scene without intentional focusing.
Partial masking can be applied for any part of an image you want
to hide.
Motion sensor can be enabled to detect every action of intruders.
Detects intruders using an external switch or a motion sensor,
automatically zooms in on the images, and notifies using alarm
signs.
Configurable Preference Settings with View on Screen
VDC-DP7584/VDC-DP7585P:
Complies with the IP66 international standard for dust and water
protection
Day/Night Automatic Switching
Model LANGUAGE SHUTTER DAY/NIGHT
VDC-DP7584 English/French/Spanish 60, 100, 250 ... m
VDC-DP7585P English/French/German 50, 120, 250 ... m
VCC-P7574 English/French/Spanish 60, 100, 250 ...
VCC-P7575P English/French/German 50, 120, 250 ...
Accessory
CD-ROM for Instruction manual ................................................... 1
Installation manual
VDC-DP7584/VCC-P7574:
English, French, Spanish..................................................... each 1
VDC-DP7585P/VCC-P7575P:
English, French, German, Chinese ..................................... each 1
Pattern sheet ................................................................................ 1
Clamping core .............................................................................. 1
VDC-DP7584/VCC-P7574:
Warranty ....................................................................................... 1
VDC-DP7584/VDC-DP7585P:
Cushioning sheet.......................................................................... 1
Hexagonal wrench, Large and Small................................... each 1
L5BH2_BK2_US_XE(GB).book 3 ページ 2006年3月2日 木曜日 午後8時41分
4
Information
Putting titles to camera images:
ROPTION TITLE (See page 9)
Capturing clear image of fast-moving subject by
increasing shutter speed:
RSHUTTER (See page 21)
Connecting to an external door switch or infrared
sensor:
ROPTION ALARM (See page 28)
Hiding partial image for privacy protection:
ROPTION PRIVACY MASK (See page 26)
Adjusting a zoom simply:
RUse Select button (See page 5)
VDC-DP7584/VDC-DP7585P
Switching between “color” and “black-and-white” mode
of DAY/NIGHT function using external switch, etc.:
RDAY/NIGHT (See page 23)
Useful Operations WEEE Symbol Information
Please note:
Your SANYO product is designed and manufactured with
high quality materials and components which can be
recycled and reused.
This symbol means that electrical and electronic
equipment, at their end-of-life, should be disposed of
separately from your household waste.
Please dispose of this equipment at your local
community waste collection/recycling centre.
In the European Union there are separate collection
systems for used electrical and electronic products.
Please help us to conserve the environment we live in!
This symbol mark and recycle system are
applied only to EU countries and not applied to
the countries in the other area of the world.
L5BH2_BK2_US_XE(GB).book 4 ページ 2006年3月2日 木曜日 午後8時41分
5
Getting Started
Accessing the Main Menu
You can configure various adjustments and preference settings on the monitor screen.
In this manual, the buttons and their names on the camera are used for description.
Using the buttons on the base circuit board
Open the dome cover. Place the dome cover back once you have
finished the settings. (Refer to the Installation Manual.)
Sync. lamp
You can set the “SYNC”-(INT/L-L) without displaying the Main menu on
the monitor.
1 While this lamp is turned off, the Main menu is not displayed, or
otherwise the cursor is located on the option other than “SYNC”.
In that case, press and hold the SET button to enter into the Main
menu, or press the Select button to UP or DOWN to turn on the lamp.
2 Once the lamp turns on, press the Select button to RIGHT or LEFT.
A lighted lamp indicates that “INT” is selected, while a flashing lamp
indicates “L-L”.
Using the Camera Control Unit
(VAC-70: Separately ordered)
Camera can be controlled remotely during setting or adjustment.
Please refer to the instruction manual for VAC-70.
SET button
Press and hold the button to enter into the Main menu, or
perform other operations such as determining a selected
value during the settings.
Select button (UP, DOWN, RIGHT, LEFT)
Press the button up and down or side to side to select an
item or set up.
Press and hold the button to continually change the
items that appear.
Simple zoom adjustment
While the camera captures an image, you can adjust
Zoom (d: Wide or c: Tele).
MEMO:
To check the image on the monitor near the camera unit, connect the
MONITOR OUT pin and the GND pin on the base circuit board to a
monitor using an alligator clip cable.
UP
DOWN
LEFT
RIGHT
SET
Note: Make sure to disconnect the unit after setting or adjustment is
completed.
VAC-70
VDC-DP7584
VDC-DP7585P
VCC-P7574
VCC-P7575P
RG-6U (5C-2V) cable,
500 m max.
BNC type
L5BH2_BK2_US_XE(GB).book 5 ページ 2006年3月2日 木曜日 午後8時41分
6
Getting Started
Accessing the Main Menu
1
Selecting item.
2
Specifying values.
Press the Select button RIGHT and LEFT to switch over to
other values.
When (y) mark displays at the right end of the item
An Example for Basic Operation for Settings and Adjustments
SET
Indicates to press the
Select button up and down
to select an item.
Indicates to press the
Select button side to side
to switch over to other
values.
Indicates to press the SET
button for decision.
Note: After the expiration of a predetermined time interval (3 minutes)
without any operation, the settings screen goes off automatically
and returns to normal monitoring screen.
SET
·SYNC
BLC
IRIS
WHITE BALANCE
AGC GAIN
GAMMA
SHUTTER
APERTURE
DAY/NIGHT
OPTION
PRESET
MENU
INT
OFF
SET y
ATW
NORM
0.45
60
HIGH
AUTO y
SET y
OFF
END
R
Main Menu
Press and hold
the button for
about 1 second.
Press the Select button
UP and DOWN to select
the item.
SYNC
BLC
IRIS
·WHITE BALANCE
AGC GAIN
INT
OFF
SET y
ATW
NORM
SYNC
BLC
IRIS
·WHITE BALANCE
AGC GAIN
INT
OFF
SET y
AWC y
NORM
SET
R
L5BH2_BK2_US_XE(GB).book 6 ページ 2006年3月2日 木曜日 午後8時41分
7
Accessing the Main Menu
3
Closing the setting screen.
Once the settings are complete, set “MENU” to “END” and press
the SET button.
If you press the SET button while “BACK” is selected, the
previous screen will reappear.
To Reset Settings (Factory Default Settings)
Select “PRESET” and choose “ON” instead of “OFF”, and press the
SET button.
Note: To reset all the settings, set “PRESET” to “ON” in the Main menu
and press the SET button. (The PRIVACY MASK and
PASSWORD will not be intialized.)
·MENU END
PRESET
·MENU
OFF
END
SET
R
·PRESET ON
·PRESET
MENU
ON
BACK
SET
R
Items Settings See page
SYNC Adjusting Synchronization 13
BLC Setting for Backlight Compensation 14
IRIS Adjusting Iris Level 15
WHITE
BALANCE
Adjusting White Balance
16
AGC GAIN Setting for Gain 19
GAMMA Adjusting Gamma 20
SHUTTER Setting for Shutter Speed 21
APERTURE Adjusting Subject Outline 22
VDC-DP7584/VDC-DP7585P
23
DAY/NIGHT Setting for Day/Night (Color/
Black-and-White/Auto) Function
OPTION Setting for Camera Name 9
Privacy Masking 26
Password 11
Input of Alarm Signal 28
User’s Language 8
·SYNC
BLC
IRIS
WHITE BALANCE
AGC GAIN
GAMMA
SHUTTER
APERTURE
DAY/NIGHT
OPTION
PRESET
MENU
INT
OFF
SET y
ATW
NORM
0.45
60
HIGH
AUTO y
SET y
OFF
END
Getting Started
L5BH2_BK2_US_XE(GB).book 7 ページ 2006年3月2日 木曜日 午後8時41分
8
Getting Started
Selecting Display Language <LANGUAGE>
You can change the language displayed on the settings and adjusting screens. (Default setting: ENGLISH)
1
Select a language and press the SET button.
RPressing the SET button will immediately change the screen
title and the language on the right.
2
Set “MENU” to “FIN” (“END” or “ENDE”) and
press the SET button.
RFinishes the setting screen.
If you press the SET button while “RETOUR” (“BACK”, “ATRAS
or “ZURUECK”) is selected, the previous screen will reappear.
·OPTION
(SET)
SYNC
BLC
IRIS
WHITE BALANCE
AGC GAIN
GAMMA
SHUTTER
APERTURE
DAY/NIGHT
·OPTION
PRESET
MENU
INT
OFF
SET y
ATW
NORM
0.45
60
HIGH
AUTO y
SET y
OFF
END
·LANGUAGE
(SET)
OPTION
TITLE
PRIVACY MASK
PASSWORD
ALARM
·LANGUAGE
PRESET
MENU
OFF
SET y
SET y
SET y
SET y
OFF
BACK
SET SET
RR R
SET
LANGUAGE
LANGUAGE
·LANGUE
IDIOMA
ENGLISH
FRENCH
SPANISH
R
LANGUAGE
LANGUAGE
·LANGUE
SPRACHE
ENGLISH
FRENCH
GERMAN
(In case FRENCH is selected)
VDC-DP7584/VCC-P7574
VDC-DP7585P/VCC-P7575P
SET
·MENU
FIN
(END)
(ENDE)
R
LANGUE
LANGUAGE ANGLAIS
LANGUE FRANCAIS
IDIOMA ESPAGNOL
LANGUE
LANGUAGE ANGLAIS
LANGUE FRANCAIS
SPRACHE ALLEMAND
·MENU FIN
VDC-DP7584/VCC-P7574
VDC-DP7585P/VCC-P7575P
For accessing the Main menu, see pages 5 – 7.
L5BH2_BK2_US_XE(GB).book 8 ページ 2006年3月2日 木曜日 午後8時41分
9
Getting Started
Naming Cameras <TITLE>
You can give a name (title) to each camera. The specified names are displayed on the monitor
so that you can easily distinguish the monitoring images when you use multiple cameras.
1
Set “TITLE” to “ON” and press the SET button.
RThe “TITLE SETTING” screen appears.
2
Choose a character(s) from the “Character
Selecting Field”.
A character is selectable when two arrows, (w) and (y), point at the
character.
RThe characters are displayed starting from (x) in the “ID string”.
You can enter up to 16 characters.
ROOM1
ROOM2
ROOM1 ROOM2
·OPTION
(SET)
OPTION
·TITLE
PRIVACY MASK
PASSWORD
ALARM
LANGUAGE
PRESET
MENU
OFF
SET y
SET y
SET y
SET y
OFF
BACK
SYNC
BLC
IRIS
WHITE BALANCE
AGC GAIN
GAMMA
SHUTTER
APERTURE
DAY/NIGHT
·OPTION
PRESET
MENU
INT
OFF
SET y
ATW
NORM
0.45
60
HIGH
AUTO y
SET y
OFF
END
SET
RR
·TITLE
ON
OPTION
·TITLE
PRIVACY MASK
PASSWORD
ALARM
LANGUAGE
PRESET
MENU
ON y
SET y
SET y
SET y
SET y
OFF
BACK
SET
R
MEMO:
If you want to overwrite the character, select “ID” and move (x)
onto it in the “ID string”, and then choose any new letter.
TITLE SETTING
y
wABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789 :-
ID ????????????????
x
POSITION
SET y
SET
R
Character Selecting FieldID string
For accessing the Main menu, see pages 5 – 7.
L5BH2_BK2_US_XE(GB).book 9 ページ 2006年3月2日 木曜日 午後8時41分
10
Getting Started
Naming Cameras <TITLE>
3
Repeat step 2 to complete the name and select
“ID”.
Example: ROOM1
The letters “???....” do not appear on the monitoring screen, but
if you select “ON” for the “TITLE” and then enter no letter at all,
the monitor will show you “???....”.
4
Select “POSITION” – “SET” and press the SET
button.
ROn the normal monitoring screen, the name will be displayed.
5
On the monitor screen, determine the location
where the name should be displayed by pressing
the Select button up-down or side to side; and
then press the SET button.
RReturns to the settings screen.
6
Set “MENU” to “END” and press the SET button.
RFinishes the settings screen and display the name on the
normal monitoring screen.
If you want to return to the previous screen, select “BACK” and
press the SET button.
To delete the name specified:
Set “PRESET” to “ON”, and press the SET button.
RAll the characters will be displayed with “?”.
MEMO:
If you want the name to be displayed on the monitor in two lines,
insert the line feed mark (v) in the “ID string” wherever you want to
start a new line. On the monitor screen, the name will be displayed
in two lines. You can enter up to 16 characters including the line
feed mark (v).
TITLE SETTING
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789 :-v
·ID ROOM1???????????
x
·ID
ID string
ID ROOM1???????????
x
·POSITION
PRESET
MENU
SET y
OFF
BACK
·POSITION
SET
R
MEMO:
If an alarm signal is input, the camera name on the screen will
blink during the time that has been set in “DURATION” (See page
32). When the camera name is not specified, “???.... will blink.
When masking setting is “ON”, the camera name will not be
displayed.
ROOM1
SET
R
L5BH2_BK2_US_XE(GB).book 10 ページ 2006年3月2日 木曜日 午後8時41分
11
Getting Started
Password Lock Setting/Cancelling <PASSWORD>
You can lock the accessing the Main menu by specifying a password. You will be prompted to enter the password to access the
Main menu.
1
Select “PASSWORD LOCK” and press the SET
button.
RThe “PASSWORD (????)” screen appears.
2
Enter the password (default: 1234) and press the
SET button.
RYou will see the “OK” message.
3
Press the SET button.
RDisplays to the “PASSWORD LOCK” – “ON”.
“1234” is a factory-preset password; it is recommended you
change it to your own password. Advance to step 4.
If you want to finish the setting, advance to step 8.
·PASSWORD
(SET)
·OPTION
(SET)
SYNC
BLC
IRIS
WHITE BALANCE
AGC GAIN
GAMMA
SHUTTER
APERTURE
DAY/NIGHT
·OPTION
PRESET
MENU
INT
OFF
SET y
ATW
NORM
0.45
60
HIGH
AUTO y
SET y
OFF
END
OPTION
TITLE
PRIVACY MASK
·PASSWORD
ALARM
LANGUAGE
PRESET
MENU
OFF
SET y
SET y
SET y
SET y
OFF
BACK
SET SET
RR R
PASSWORD
·PASSWORD LOCK
PASSWORD CHANGE
MENU
OFF y
SET y
BACK
·PASSWORD
LOCK
SET
R
Note: If you enter an incorrect password, you will see the “NG”
message. If you fail to enter the valid password three times
successively, the prompt display will disappear.
PASSWORD
· 1234
x
SET y
SET
R
For accessing the Main menu, see pages 5 – 7.
L5BH2_BK2_US_XE(GB).book 11 ページ 2006年3月2日 木曜日 午後8時41分
12
Getting Started
Password Lock Setting/Cancelling <PASSWORD>
4
Select “PASSWORD CHANGE” and press the
SET button.
RThe <NOW PASSWORD> “????” screen appears.
5
Enter the current password and press the SET
button.
RThe <NEW PASSWORD> “????” screen appears.
6
Enter a new password (4 numerical values) and
press the SET button.
Write down the new password before you forget it.
RYou will see the “OK” message.
7
Press the SET button.
RReturns to the “PASSWORD” screen.
8
Set “MENU” to “END” and press the SET button.
RFinishes the setting screen and returns to the normal
monitoring screen.
If you want to return to the previous screen, select “BACK” and
press the SET button.
PASSWORD
PASSWORD LOCK
·PASSWORD CHANGE
ON y
SET y
·PASSWORD
CHANGE
SET
R
PASSWORD
<NOW PASSWORD>
· 1234
x
SET y
SET
R
To cancel the password lock
Press the SET button on “PASSWORD LOCK” – “ON”, and then
enter the password. You will see “OFF” instead of “ON”.
L5BH2_BK2_US_XE(GB).book 12 ページ 2006年3月2日 木曜日 午後8時41分
13
Adjusting Synchronization Error <SYNC>
By default, the synchronization adjustment for the camera is performed internally (INT). However, you must make adjustments
in the Line Lock (L-L) Setting screen, if the monitor screen seems out of sync after switching over among multiple cameras
using AC 24 V.
Note: The Line Lock setting is not available for DC 12 V operation.
1
Adjusting Synchronization (0 – 524).
Make adjustments so that the vertical synchronization of the
monitor screen does not move up or down.
2
Set “MENU” to “END” and press the SET button.
RFinishes the setting screen and returns to the normal
monitoring screen.
If you want to return to the previous screen, select “BACK” and
press the SET button.
L-L SETTING (Line Lock)
·SYNC L-L
·SYNC
BLC
IRIS
WHITE BALANCE
AGC GAIN
GAMMA
SHUTTER
APERTURE
DAY/NIGHT
OPTION
PRESET
MENU
L-L y
OFF
SET y
ATW
NORM
0.45
60
HIGH
AUTO y
SET y
OFF
END
L-L SETTING
<V SYNC PHASE>
· 0
PRESET
MENU
OFF
BACK
SET
RR
L-L SETTING
<V SYNC PHASE>
· 250
PRESET
MENU
OFF
BACK
For accessing the Main menu, see pages 5 – 7.
L5BH2_BK2_US_XE(GB).book 13 ページ 2006年3月2日 木曜日 午後8時41分
14
Backlight Compensation <BLC>
If the images of subjects are not clear because of backlight, correct it by adjusting
conditions or changing correction method.
1
Select “BLC” and specify a correction method.
2
Set “MENU” to “END” and press the SET button.
RFinishes the setting screen and returns to the normal
monitoring screen.
SYNC
·BLC
IRIS
WHITE BALANCE
AGC GAIN
GAMMA
SHUTTER
APERTURE
DAY/NIGHT
OPTION
PRESET
MENU
INT
OFF
SET y
ATW
NORM
0.45
60
HIGH
AUTO y
SET y
OFF
END
·BLC
CENT (Center zone metering)
Correction is made based on the optical measurement that is
focused on the central area of the screen (The image of subject to
be corrected is located in the center of the screen).
MULT1 (Multi-spot metering, Normal mode)
Correction is made based on the optical measurement and
assessment of the entire screen (The image of subject to be
corrected is not limited to a center of the screen location).
MULT2 (Multi-spot metering, High mode)
Compared to MULT1, faster backlight correction is possible
against a lesser amount of light.
OFF
No correction is performed for backlight.
For accessing the Main menu, see pages 5 – 7.
L5BH2_BK2_US_XE(GB).book 14 ページ 2006年3月2日 木曜日 午後8時41分
15
Adjusting Iris Level <IRIS>
If you need to adjust the brightness follow the steps below.
1
Adjust the brightness (iris) (0 – 100).
The greater the number, the brighter it gets.
2
Set “MENU” to “END” and press the SET button.
RFinishes the settings screen and returns to the normal
monitoring screen.
If you want to return to the previous screen, select “BACK” and
press the SET button.
·IRIS
SYNC
BLC
·IRIS
WHITE BALANCE
AGC GAIN
GAMMA
SHUTTER
APERTURE
DAY/NIGHT
OPTION
PRESET
MENU
INT
OFF
SET y
ATW
NORM
0.45
60
HIGH
AUTO y
SET y
OFF
END
(SET)
SET
IRIS SETTING
<LEVEL>
· 50
PRESET
MENU
OFF
BACK
RR
IRIS SETTING
<LEVEL>
· 20
PRESET
MENU
OFF
BACK
Note:
Under extremely bright lighting, unfavorable phenomena may
occur such as swaths of smear on the screen, because light
intensity entering the lens is too high to be controlled. Reduce the
intensity by changing the angle of the lighting source or by other
means.
If the images of subjects under fluorescent lighting are flickering,
replace fluorescent lighting with incandescent lighting.
For accessing the Main menu, see pages 5 – 7.
L5BH2_BK2_US_XE(GB).book 15 ページ 2006年3月2日 木曜日 午後8時41分
16
Adjusting White Balance <WHITE BALANCE>
With its default Auto-tracing White Balance (ATW) setting, this unit is able to obtain natural colors even when the light source
is changed. However, you may manually change the white balance settings or its mode to obtain better tone, especially when
the screen color does not match actual objects.
1
Select “WHITE BALANCE” and specify a mode.
2
For advanced settings (AWC or MWB), press the
SET button.
REach corresponding setting screen will appear.
Advance to next page when selecting “AWC”.
Advance to page 18 when selecting “MWB”.
3
Set “MENU” to “END” and press the SET button.
RFinishes the setting screen and returns to the normal
monitoring screen.
SYNC
BLC
IRIS
·WHITE BALANCE
AGC GAIN
GAMMA
SHUTTER
APERTURE
DAY/NIGHT
OPTION
PRESET
MENU
INT
OFF
SET y
ATW
NORM
0.45
60
HIGH
AUTO y
SET y
OFF
END
·WHITE
BALANCE
ATW (Auto-Tracing White balance)
Automatic setting for white balance.
AWC (One-Push Adjustment): (See next page)
Adjusts white balance by shooting white paper or wall.
3200 (Halogen light or incandescent lamp, etc.)
(Fixed)
Targeted at around 3200 K of color temperature.
5600 (Daytime sunlight) (Fixed)
Targeted at around 5600 K of color temperature.
FLUO (Fluorescent lamp) (Fixed)
Targeted at around 4200 K of color temperature.
MWB (Manual White Balance): (See page 18)
Fine-adjusts red and blue manually.
For accessing the Main menu, see pages 5 – 7.
L5BH2_BK2_US_XE(GB).book 16 ページ 2006年3月2日 木曜日 午後8時41分
17
Adjusting White Balance <WHITE BALANCE>
1
Select “AWC LOCK” – “SET”.
2
Point a camera to a white paper or wall to project
an image on the whole screen, and press the SET
button.
RThe cursor “q” lights off, and white balance adjustment will
start. The adjustment will end after about 2 seconds when “q
lights again.
If the adjustment does not yield a satisfactory result, press the
SET button again.
To perform fine adjustment of color
In the “AWC SETTING” screen, select “GO TO MWB” – “SET”, and
press the SET button.
RThe “MWB SETTING” screen appears. Specify values manually.
(See next page)
3
Set “MENU” to “END” and press the SET button.
RFinishes the settings screen and returns to the normal
monitoring screen.
If you want to return to the previous screen, select “BACK” and
press the SET button.
AWC SETTING (One-Push Adjustment)
AWC SETTING
·AWC LOCK
GO TO MWB
SET
SET y
·AWC LOCK
(SET)
SET
White paper or wall
MEMO: Transferring to the “MWB SETTING” through “GO TO MWB”,
white balance mode (see page 16) will be changed to
“MWB”.
L5BH2_BK2_US_XE(GB).book 17 ページ 2006年3月2日 木曜日 午後8時41分
18
Adjusting White Balance <WHITE BALANCE>
1
Select “R” or “B” to adjust tint (0 – 255).
R : Adjusting Red
B : Adjusting Blue
The greater the number, the deeper the tint becomes.
2
Set “MENU” to “END” and press the SET button.
RFinishes the settings screen and returns to the normal
monitoring screen.
If you want to return to the previous screen, select “BACK” and
press the SET button.
MWB SETTING (Manual White Balance)
MWB SETTING
· R 43
B 66
PRESET
MENU
OFF
BACK
L5BH2_BK2_US_XE(GB).book 18 ページ 2006年3月2日 木曜日 午後8時41分
19
Setting Gain Value <AGC GAIN>
If you need to adjust the sensitivity in dark places (AGC*), follow steps below.
1
Select “AGC GAIN” and specify a mode.
2
Set “MENU” to “END” and press the SET button.
RFinishes the settings screen and returns to the normal
monitoring screen.
SYNC
BLC
IRIS
WHITE BALANCE
·AGC GAIN
GAMMA
SHUTTER
APERTURE
DAY/NIGHT
OPTION
PRESET
MENU
INT
OFF
SET y
ATW
NORM
0.45
60
HIGH
AUTO y
SET y
OFF
END
·AGC GAIN
NORM
Normal setting
HIGH (For a dark subject)
Setting with which a bright image is obtained in a lower
illuminance than the NORM setting.
This setting causes noise generation and a grainy image.
OFF
Fixed gain setting
For accessing the Main menu, see pages 5 – 7.
*AGC (Auto Gain Control) is a function to adjust automatically the
gain of the Video signal from the camera so that an optimum signal
level is obtained according to brightness of the object.
L5BH2_BK2_US_XE(GB).book 19 ページ 2006年3月2日 木曜日 午後8時41分
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

Sanyo VCC-P7574 - 1/4" Color CCD Indoor Mini Dome Camera User manual

Category
Security cameras
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI