Sanyo VCC-P9575P User manual

INSTRUCTION MANUAL (Pattern sheet attached)

Color CCD Camera

VDC-DP9584S

VDC-DP9585P

VCC-P9574S

VCC-P9575P

Please read this manual before installing and using this

camera, and always follow the instructions in it for proper

use. Be sure to keep it handy for later reference.

• Refer to the supplied CD-ROM for the French, Spanish, German and Chinese

“INSTRUCTION MANUAL”.

To view the INSTRUCTION MANUAL contained in the supplied CD-ROM, you

need Adobe

®

Reader

®

application. If your PC has not been installed with it, you

can download it for installation from the following web site at Adobe Systems

Incorporated.

http://www.adobe.com

• Consultez le CD-ROM fourni pour le « MANUEL D’INSTRUCTIONS » en

français, espagnol, allemand et en chinois.

Pour visualiser le MANUEL D’INSTRUCTIONS contenu dans le CD-ROM

fourni, l’application Adobe

®

Reader

®

vous est nécessaire. Si votre ordinateur a

été installé sans cette application, vous pouvez la télécharger depuis le site

Web suivant d’Adobe Systems Incorporated.

http://www.adobe.com

• Hacer referencia al CD-ROM que se suministra para consultar el “MANUAL DE

INSTRUCCIONES” en francés, español, alemán y chino.

Para ver el MANUAL DE INSTRUCCIONES contenido en el CD-ROM

suministrado, es necesario disponer de la aplicación Adobe

®

Reader

®

. Si el PC

no tiene instalada esta aplicación, es posible descargarla para la instalación en

el siguiente sitio web en Adobe Systems Incorporated.

http://www.adobe.com

• Die “BEDIENUNGSANLEITUNG” in den Sprachen Französich, Spanisch,

Deutsch und Chinesisch finden Sie auf der mitgelieferten CD-ROM.

Zum Öffnen der BEDIENUNGSANLEITUNG auf der mitgelieferten CD-ROM

benötigen Sie das Programm Adobe

®

Reader

®

. Falls diese Anwendung nicht

auf Ihrem PC installiert ist, können Sie das Programm unter der nachstehend

angegebenen Internet-Adresse bei Adobe Systems Incorporated zur

Installation herunterladen:

http://www.adobe.com

• 请参阅随附的光盘以了解法语、西班牙语、德语和中文 “说明手册”。

要查看随附光盘中包含的说明手册，您需要安装有 Adobe

®

Reader

®

应用程序。

如果您的

PC

上没有安装此应用程序，则您可以从

Adobe Systems Incorporated

的

以下网站下载并进行安装。

http://www.adobe.com

VDC-DP9584S/VDC-DP9585P VCC-P9574S/VCC-P9575P

L5BL2_BM2_US_XE(GB).book 1 ページ２００６年６月１４日　水曜日　午後１２時５６分

1

Contents

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

WEEE Symbol Information. . . . . . . . . . . . . . . . . . . . . . . . . 4

Useful Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Setting Up and Making Adjustments

Using a Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Accessing the Main Menu . . . . . . . . . . . . . . . . . . . . 7

Selecting Display Language <LANGUAGE>. . . . . . 9

Naming Cameras <OPTION> – <TITLE> . . . . . . . . . 10

Setting/Cancelling Password Lock

<PASSWORD> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Adjusting Synchronization Error <SYNC> . . . . . . . . . . . . . 15

Backlight Compensation <BLC>. . . . . . . . . . . . . . . . . . . . . 16

Adjusting Iris Level <IRIS> . . . . . . . . . . . . . . . . . . . . . . . . . 17

Setting White Balance <WHITE BALANCE> . . . . . . . . . . . 18

AOne-Push Adjustment (AWC). . . . . . . . . . . . . . . . . . . 19

BManual White Balance (MWB) . . . . . . . . . . . . . . . . . . 20

Setting Gain Value <AGC GAIN>. . . . . . . . . . . . . . . . . . . . 21

Correcting Gamma Characteristic <GAMMA> . . . . . . . . . . 22

Specifying Shutter Speed <SHUTTER>. . . . . . . . . . . . . . . 23

Accentuating Subject Outline <APERTURE>. . . . . . . . . . . 24

(VDC-DP9584S/VDC-DP9585P)

Adjusting DAY/NIGHT Function <DAY/NIGHT>. . . . . . . . . 25

AAdjusting Automatic Setting (AUTO) . . . . . . . . . . . . . 26

BAdjusting Black-and-White Setting (B/W). . . . . . . . . . 27

Getting Started Setting Camera Performance <CAMERA> . . . . . . 14

☞The contents in angle brackets < > are the menu screen title.

L5BL2_BM2_US_XE(GB).book 1 ページ２００６年６月１４日　水曜日　午後１２時５６分

2

Contents

Sequential Panning along the Registered Preset Positions

<SEQUENTIAL PAN> . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Automatic Intermittent Panning <AUTO PAN> . . . . . . . . . 32

Specifying Alarm Input <ALARM IN>. . . . . . . . . . . . . . . . . 36

Specifying Alarm Output <ALARM OUT> . . . . . . . . . . . . . 37

Setting Motion Sensor <MOTION> . . . . . . . . . . . . . . . . . . 38

Setting Zooming Up at Alarm Detection <ZOOM>. . . . . . . 40

Setting Alarm Duration <DURATION>. . . . . . . . . . . . . . . . 40

Setting Alarm Detection Notification <ALARM SIGN> . . . . 41

Setting Protocol for Camera Controller <CONTROL> . . . . 45

Setting Camera Address <ADDRESS> . . . . . . . . . . . . . . . 46

Setting Alarm Output to Communication Line

<ALARM LINE OUT> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Replacement timing of major parts. . . . . . . . . . . . . . . . . . . 47

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Pattern sheet

(VDC-DP9584S/VDC-DP9585P)

. . . . . . . . . . . . . . . . . . . . 50

(VCC-P9574S/VCC-P9575P) . . . . . . . . . . . . . . . . . . . . . . 51

Screen Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Registering Monitoring Positions

<PRESET POSITION> . . . . . . . . . . . . . . . . . . . . . . 28

Automatic Monitoring <AUTO MODE> . . . . . . . . 30

Returning to Specified Monitoring Mode

Automatically <AUTO RETURN> . . . . . . . . . . . . . 34

Setting Alarm <ALARM>. . . . . . . . . . . . . . . . . . . . 35

Hiding Image Partially

<OPTION> – <PRIVACY MASK> . . . . . . . . . . . . . . 42

Configuring the Communication Settings

<OPTION> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

MEMO:

This instruction manual covers four models. Any difference among the four models is indicated when necessary.

Differences in the menu screen among the four models are as indicated below.

• This manual describes the menu screen for the VDC-DP9584S.

VDC-DP9584S VCC-P9574S VDC-DP9585P VCC-P9575P

Menu language English/French/Spanish English/French/German

Shutter speed 1/60, 1/100, 1/250, ... 1/50, 1/120, 1/250, ...

Day/Night function m – m –

IP66 m – m –

L5BL2_BM2_US_XE(GB).book 2 ページ２００６年６月１４日　水曜日　午後１２時５６分

3

Precautions

■ In case of a problem

Do not use the unit if smoke or a strange odor comes from the unit, or if it

seems not to function correctly. Turn off the power immediately and

disconnect the power cord, and then consult your dealer or an Authorized

Sanyo Service Center.

■ Do not open or modify

Do not open the cabinet, as it may be dangerous and cause damage to

the unit. For repairs, consult your dealer or an Authorized Sanyo Service

Center.

■ Do not put objects inside the unit

Make sure that no metal objects or flammable substance get inside the

unit. If used with a foreign object inside, it could cause a fire, a short-circuit

or damage. Be careful to protect the unit from rain, sea water, etc. If water

or liquid gets inside the unit, turn off the power immediately and disconnect

the power cord, and then consult your dealer or an Authorized Sanyo

Service Center.

■ Be careful when handling the unit

To prevent damage, do not drop the unit or subject it to strong shock or

vibration.

■ Do not install this unit close to magnetic fields

The magnetic fields may result in unstable operation.

■ Protect from humidity and dust

To prevent damage, do not install the unit where there is greasy smoke or

steam, where the humidity may get too high, or where there is a lot of dust.

■ Protect from high temperatures

Do not install close to stoves, or other heat sources, such as spotlights,

etc., or where it could be subject to direct sunlight, as this could cause

deformation, discoloration or other damage.

Be careful when installing close to the ceiling, in a kitchen or boiler room,

as the temperature may rise to high levels.

■ Cleaning

• Dirt can be removed from the cabinet by wiping it with a soft cloth. To

remove stains, wipe with a soft cloth moistened with a soft detergent

solution and wrung dry, then dry by wiping with a soft cloth.

• Do not use benzine, thinner or other chemical products on the cabinet,

as this may cause deformation and paint peeling. Before using a

chemical cloth, make sure to read all accompanying instructions. Make

sure that no plastic or rubber material comes into contact with the

cabinet for a long period of time, as this may cause damage or paint

peeling.

(VDC-DP9584S/VDC-DP9585P)

■ Approvals: IP66

This unit has been certified to IP66 standards when properly installed.

Ensure all openings in enclosure are sealed as per manufacturer's

instructions.

The IP66 has not been verified by UL.

Getting Started

L5BL2_BM2_US_XE(GB).book 3 ページ２００６年６月１４日　水曜日　午後１２時５６分

4

Getting Started

Information

• Equipped with motorized zoom pan focus auto iris lens. Thanks to its

large depth of field, focused images can be obtained in a wider range

of scene without intentional focusing.

• Equipped with motorized pan/tilt.

• Can be installed on both the ceiling and walls.

• Configurable preset position (maximum16 positions), sequential pan,

and auto pan.

• Equipped with a motion sensor that detects movement in the monitor

screen and issues an alarm.

• Detects intruders using an external switch or a motion sensor,

automatically zooms in on the images, and notifies using alarm

output.

• If a hard disk recorder is connected, alarm-triggered images can be

recorded according to the alarm output.

• If a hard disk recorder or controller is connected, monitoring and/or

camera adjustment operation can be performed remotely.

• Partial masking can be applied for any part of an image you want to

hide.

• Configurable preference settings with view on screen.

• Access to the main menu is controlled by setting a password.

(VDC-DP9584S/VDC-DP9585P)

• Equipped with function for automatically switching between COLOR

and Black-and-White (DAY/NIGHT).

• Complies with the IP66 international standard for dust and water

protection. (The IP66 has not been verified by UL.)

Characteristics WEEE Symbol Information

Please note:

Your SANYO product is designed and manufactured with

high quality materials and components which can be

recycled and reused.

This symbol means that electrical and electronic

equipment, at their end-of-life, should be disposed of

separately from your household waste.

Please dispose of this equipment at your local

community waste collection/recycling centre.

In the European Union there are separate collection

systems for used electrical and electronic products.

Please help us to conserve the environment we live in!

This symbol mark and recycle system are

applied only to EU countries and not applied to

the countries in the other area of the world.

L5BL2_BM2_US_XE(GB).book 4 ページ２００６年６月１４日　水曜日　午後１２時５６分

5

Information

■ Registering multiple preset positions:

RPRESET POSITION (see page 28)

■ Making the camera move successively along the

registered preset positions:

RAUTO MODE → SEQUENTIAL PAN (see page 31)

■ Performing automatic panning:

RAUTO MODE → AUTO PAN (see page 32)

■ Setting the camera to return to the specified monitoring

mode following manual operation on the angle of view:

RAUTO RETURN (see page 34)

■ Connecting to an external door switch or infrared

sensor:

RALARM (see page 35)

■ Making the unit issue a warning upon detecting

suspicious figures, etc.:

RALARM → MOTION (see page 38)

■ Making the unit record the image at alarm detection:

ROPTION → ALARM LINE OUT (see page 46)

■ Limiting main menu access to administrators:

RPASSWORD (see page 12)

■ Hiding image partially for privacy protection:

ROPTION → PRIVACY MASK (see page 42)

■ Operating remotely using a hard disk recorder or

controller:

ROPTION → CONTROL (see page 45)

(VDC-DP9584S/VDC-DP9585P)

■ Switching between “Color” and “Black-and-White” mode

of DAY/NIGHT function using an external switch, etc.:

RCAMERA → DAY/NIGHT (see page 25)

Useful Operations

Getting Started

L5BL2_BM2_US_XE(GB).book 5 ページ２００６年６月１４日　水曜日　午後１２時５６分

6

Getting Started

Setting Up and Making Adjustments Using a Monitor

■ Using the Camera Control Unit

(VAC-70: Separately ordered)

Camera can be controlled remotely during setting or adjustment.

• Please refer to the instruction manual for VAC-70.

Button operations with VAC-70 are the same as with the unit.

■ Opening the dome cover and setting up the camera

using the buttons on the circuit board

Place the dome cover back once you have finished settings.

• See the INSTALLATION MANUAL supplied with the unit.

Checking the settings screen or camera angle

1 SET button

Press and hold for about 1 second for the main menu to appear.

2 Select button

• Press up, down, left, right to select an item on the settings screen or change a

setting value.

• The pan/tilt and zoom functions can be operated using the Select button during

live mode (with no settings screen displayed).

Press the SET button to switch over between pan/tilt and zoom operations.

VAC-70

RG-6U (5C-2V) cable,

300 m max.

BNC type

Video in

VIDEO

OUT

CAMERA

Pan: Press d(LEFT) or c(RIGHT)

Tilt: Press j(UP) or l(DOWN)

Wide: Press d(LEFT)

Tele: Press c(RIGHT)

UP

DOWN

LEFT

RIGHT

SET

GND

MONITOR

OUT

1

2

Checking the settings screen or

camera angle on a portable monitor

Connect the MONITOR OUT pin and the GND

pin on the circuit board to a monitor using an

alligator clip cable.

(It is also possible to connect a monitor using

the MONITOR OUT connector.)

Note: Do not touch the camera unit except

when settings and adjustments are

necessary.

When the power is turned on, the camera

address (ADDRESS), and protocol

(CONTROL) and baud rate (BAUD RATE)

will be displayed about for 5 seconds on

the monitor screen.

When <PRIVACY MASK> is “ON”,

background of the monitor is shown in

black.

ADDRESS

CONTROL

BAUD RATE

1

485S

19200

Example

L5BL2_BM2_US_XE(GB).book 6 ページ２００６年６月１４日　水曜日　午後１２時５６分

7

Getting Started

Accessing the Main Menu

1

Access the main menu.

2

Select item.

3

Open the advanced settings screen.

4

Specify values.

Note: After the expiration of a predetermined time interval (3 minutes)

without any operation, the settings screen goes off automatically

and returns to normal monitoring screen.

SET

·CAMERA

PRESET POSITION

AUTO MODE

AUTO RETURN

ALARM

PASSWORD

LANGUAGE

OPTION

PRESET

MENU

SET y

1 y

SEQ y

OFF

SET y

OFF

END

R

Main menu

Press and hold

the button for

about 1 second.

·CAMERA

PRESET POSITION

AUTO MODE

AUTO RETURN

ALARM

SET y

1 y

SEQ y

OFF

SET y

Cursor

Moves the cursor “·” using the Select button UP and DOWN

to select the item.

·CAMERA

PRESET POSITION

AUTO MODE

AUTO RETURN

ALARM

SET y

1 y

SEQ y

OFF

SET y

SET

R

When “y” mark displays

Press the SET button

to open the

advanced settings

screen.

·SYNC

BLC

IRIS

WHITE BALANCE

AGC GAIN

GAMMA

INT

OFF

SET y

ATW

NORM

0.45

Press the Select button

RIGHT and LEFT to switch

over to other values.

L5BL2_BM2_US_XE(GB).book 7 ページ２００６年６月１４日　水曜日　午後１２時５６分

8

Getting Started

Accessing the Main Menu

5

Close the settings screen.

Once the settings are complete, set <MENU> to “END” and press

the SET button.

■ To return to the previous screen

Select <MENU> – “BACK” and press the SET button.

■ To reset settings (Factory Default Settings)

Select <PRESET> and choose “ON” instead of “OFF”, and press the

SET button.

■ Main menu guide

Note: To reset all the settings, set <PRESET> to “ON” in the main menu

and press the SET button.

The <PRIVACY MASK> and <CONTROL> in <OPTION>, and

<PASSWORD> will not be initialized.

·MENU END

PRESET

·MENU

OFF

END

SET

R

PRESET

·MENU

OFF

BACK

SET

R

·PRESET ON

·PRESET

MENU

ON

BACK

SET

R

Items Settings See page

CAMERA

Setting Camera Performance

(Synchronization, Backlight

Compensation, Iris Level, White

Balance, Gain, Gamma, Shutter

Speed, Aperture, DAY/NIGHT)

14

PRESET POSITION

Registering Monitoring Positions

(No.1 - 16)

28

AUTO MODE

Automatic Monitoring

(Sequential Pan, Auto Pan)

30

AUTO RETURN

Returning to Specified Monitoring

Mode Automatically

34

ALARM Setting Alarm 35

PASSWORD Setting/Cancelling Password Lock 12

LANGUAGE Selecting Display Language 9

OPTION

TITLE Naming Cameras 10

PRIVACY

MASK

Hiding Image Partially

42

CONTROL

Setting Protocol for Camera

Controller

45

ADDRESS Setting Camera Address 46

ALARM LINE

OUT

Setting Alarm Output to

Communication Line

46

PRESET Initializing Settings 8

MENU

Closing a Screen/Returning to

Previous Screen

8

L5BL2_BM2_US_XE(GB).book 8 ページ２００６年６月１４日　水曜日　午後１２時５６分

9

Getting Started

Selecting Display Language <LANGUAGE>

You can change the language displayed on the settings and adjusting screens. (Default setting: English)

1

Select a language and press the SET button.

RPressing the SET button will immediately change the language

displayed on the screen.

2

Set <MENU> to “FIN” (“END”) and press the SET

button.

RCloses the settings screen and returns to the normal monitoring

screen.

• If you want to return to the previous screen, select “RETOUR”

(“BACK” or “ATRAS”) and press the SET button.

·LANGUAGE

SET

RR

CAMERA

PRESET POSITION

AUTO MODE

AUTO RETURN

ALARM

PASSWORD

·LANGUAGE

OPTION

PRESET

MENU

SET y

1 y

SEQ y

OFF

SET y

OFF

END

LANGUAGE

·LANGUAGE

LANGUE

IDIOMA

MENU

ENGLISH

FRENCH

SPANISH

BACK

SET

LANGUAGE

·LANGUE

IDIOMA

ENGLISH

FRENCH

SPANISH

R

LANGUAGE

·LANGUE

SPRACHE

ENGLISH

FRENCH

GERMAN

(In case FRENCH is selected)

VDC-DP9584S/VCC-P9574S

VDC-DP9585P/VCC-P9575P

SET

·MENU

FIN

(END)

→

R

LANGUE

LANGUAGE ANGLAIS

LANGUE FRANCAIS

IDIOMA ESPAGNOL

LANGUE

LANGUAGE ANGLAIS

LANGUE FRANCAIS

SPRACHE ALLEMAND

·MENU FIN

VDC-DP9584S/VCC-P9574S

VDC-DP9585P/VCC-P9575P

(In case FRENCH is selected)

For accessing the main menu, see pages 7 – 8.

L5BL2_BM2_US_XE(GB).book 9 ページ２００６年６月１４日　水曜日　午後１２時５６分

10

Getting Started

Naming Cameras <OPTION> – <TITLE>

You can give a name (title) to each camera. The specified names are displayed on the monitor

so that you can easily distinguish the monitoring images when you use multiple cameras.

1

Set <TITLE> to “ON” and press the SET button.

RThe “TITLE SETTING” screen appears.

2

Choose a character(s) from the “Character

Selecting Field”.

A character is selectable when two arrows, (w) and (y), point at the

character.

RThe characters are displayed starting from (x) in the “ID string”.

■ To overwrite the character

Select <ID> and move (x) onto it in the “ID string”, and then choose any new

letter.

ROOM1

ROOM2

ROOM1 ROOM2

·OPTION

OPTION

·TITLE

PRIVACY MASK

CONTROL

ADDRESS

ALARM LINE OUT

PRESET

MENU

OFF

SET y

COAX

1

OFF

BACK

SET

RR

CAMERA

PRESET POSITION

AUTO MODE

AUTO RETURN

ALARM

PASSWORD

LANGUAGE

·OPTION

PRESET

MENU

SET y

1 y

SEQ y

OFF

SET y

OFF

END

·TITLE

ON

SET

R

OPTION

·TITLE

PRIVACY MASK

CONTROL

ADDRESS

ALARM LINE OUT

PRESET

MENU

ON y

SET y

COAX

1

OFF

BACK

SET

R

TITLE SETTING

y

wABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789 :-

ID ????????????????

x

POSITION

SET y

Character

Selecting Field

ID string

For accessing the main menu, see pages 7 – 8.

L5BL2_BM2_US_XE(GB).book 10 ページ２００６年６月１４日　水曜日　午後１２時５６分

11

Getting Started

Naming Cameras <OPTION> – <TITLE>

3

Repeat step 2 to complete the name.

• You can enter up to 16 characters.

Example: ROOM1

RThe letters “???....” do not appear on the monitor screen, but if

you select “ON” for the <TITLE> and then enter no letter at all,

the monitor will show you “???....”.

■

If you want the name to be displayed on the monitor in two lines

Select <ID> and enter the line feed mark (v) in the “ID string” wherever you

want to start a new line.

4

Select <POSITION> and press the SET button.

ROn the normal monitoring screen, the name will be displayed.

5

Determine the location where the name should

be displayed, and then press the SET button.

RReturns to the settings screen.

6

Set <MENU> to “END” and press the SET button.

RCloses the settings screen and displays the name on the

normal monitoring screen.

• If you want to return to the previous screen, select “BACK” and

press the SET button.

■ To delete the name specified

Set <PRESET> to “ON”, and press the SET button.

RAll the characters in the “ID string” will be displayed with “?”.

TITLE SETTING

ABCDEFGHIJKLM

NOPQRSTUVWXYZ

0123456789 :-v

·ID ROOM1???????????

x

ID ROOM1???????????

x

·POSITION

PRESET

MENU

SET y

OFF

BACK

·POSITION

SET

R

MEMO:

• If an alarm signal is input when <ALARM SIGN> is “ON” (see

page 41), the camera name on the screen will blink during the

time set in <DURATION> (see page 40). When the camera name

is not specified, “???....” will blink.

If <MOTION> is “ON” (see page 38), the camera name on the

screen will also blink when the motion sensor detects movement.

• When <PRIVACY MASK> is “ON” (see page 42), the camera

name will not be displayed.

ROOM1

SET

R

L5BL2_BM2_US_XE(GB).book 11 ページ２００６年６月１４日　水曜日　午後１２時５６分

12

Getting Started

Setting/Cancelling Password Lock <PASSWORD>

You can lock the access to the main menu by specifying a password. You will be prompted to enter the password to access the

main menu.

1

Select <PASSWORD LOCK> and press the SET

button.

RThe password input screen appears.

2

Enter the password and press the SET button.

When setting a password for the first time, you must enter the

factory default password “1234”.

RYou will see the “OK” message.

3

Press the SET button.

RDisplays <PASSWORD LOCK> – “ON”.

• “1234” is a factory default password; it is recommended you

change it to your own password. Advance to step 4.

• If you want to finish the setting, advance to step 7.

SET

RR

·PASSWORD

CAMERA

PRESET POSITION

AUTO MODE

AUTO RETURN

ALARM

·PASSWORD

LANGUAGE

OPTION

PRESET

MENU

SET y

1 y

SEQ y

OFF

SET y

OFF

END

PASSWORD

·PASSWORD LOCK

PASSWORD CHANGE

MENU

OFF y

SET y

BACK

PASSWORD

·PASSWORD LOCK

PASSWORD CHANGE

MENU

OFF y

SET y

BACK

·PASSWORD

LOCK

SET

R

Note:

If you enter an incorrect password, you will see the “NG” message. If

you fail to enter the valid password three times successively, the

prompt display will disappear. Start again from the beginning.

PASSWORD

· 1234

x

SET y

SET

R

For accessing the main menu, see pages 7 – 8.

L5BL2_BM2_US_XE(GB).book 12 ページ２００６年６月１４日　水曜日　午後１２時５６分

13

Getting Started

Setting/Cancelling Password Lock <PASSWORD>

4

Select <PASSWORD CHANGE> and press the

SET button.

RThe current password input screen appears.

5

Enter the current password and press the SET

button.

RThe new password input screen appears.

6

Enter a new password (4 numerical values) and

press the SET button.

☞ Write down the new password before you forget it.

RYou will see the “OK” message.

7

Select <MENU> – “END” and press the SET

button.

RCloses the settings screen and returns to the normal monitoring

screen.

• If you want to return to the previous screen, select “BACK” and

press the SET button.

■ To cancel the password lock

Press the SET button on <PASSWORD LOCK> – “ON”, and then

enter the password.

RYou will see “OFF” instead of “ON”.

PASSWORD

PASSWORD LOCK

·PASSWORD CHANGE

ON y

SET y

·PASSWORD

CHANGE

SET

R

PASSWORD

· 1234

x

SET y

SET

R

PASSWORD

· ????

x

SET y

L5BL2_BM2_US_XE(GB).book 13 ページ２００６年６月１４日　水曜日　午後１２時５６分

14

Setting Camera Performance <CAMERA>

Open the screen for setting and adjusting the camera performance.

1

Select <CAMERA> and press the SET button.

RThe settings screen for camera performance appears.

■ To close the settings screen and return to the normal

monitoring screen

Set <MENU> to “END” and press the SET button.

• If you want to return to the previous screen, select “BACK” and

press the SET button.

■ Camera performance screen guide

·CAMERA

SET

R

·CAMERA

PRESET POSITION

AUTO MODE

AUTO RETURN

ALARM

PASSWORD

LANGUAGE

OPTION

PRESET

MENU

SET y

1 y

SEQ y

OFF

SET y

OFF

END

·SYNC

BLC

IRIS

WHITE BALANCE

AGC GAIN

GAMMA

SHUTTER

APERTURE

DAY/NIGHT

PRESET

MENU

INT

OFF

SET y

ATW

NORM

0.45

60

HIGH

AUTO y

OFF

BACK

Items Settings See page

SYNC Adjusting Synchronization Error 15

BLC Backlight Compensation 16

IRIS Adjusting Iris Level 17

WHITE BALANCE Setting White Balance 18

AGC GAIN Setting Gain Value 21

GAMMA Correcting Gamma Characteristic 22

SHUTTER Specifying Shutter Speed 23

APERTURE Accentuating Subject Outline 24

(VDC-DP9584S/

VDC-DP9585P)

DAY/NIGHT

Adjusting DAY/NIGHT Function 25

For accessing the main menu, see pages 7 – 8.

L5BL2_BM2_US_XE(GB).book 14 ページ２００６年６月１４日　水曜日　午後１２時５６分

15

Setting Camera Performance <CAMERA>

By default, the synchronization adjustment for the camera is performed internally (INT). However, you must make adjustments

in the Line-Lock Setting (L-L) screen, if the monitor screen seems out of sync after switching over among multiple cameras

using AC 24 V. Select a camera as a reference and adjust the others based on the selected one.

Note: The Line-Lock setting is not available for DC 12 V operation.

1

Set <SYNC> to “L-L” and press the SET button.

RThe “L-L SETTING” screen appears.

2

Adjust synchronization (0 – 524).

• Make adjustments so that the vertical synchronization of the

monitor screen does not move up or down.

3

Select <MENU> – “BACK” and press the SET

button.

RReturns to the camera performance screen.

• If you want to close the settings screen, set to “END” and press

the SET button.

Adjusting Synchronization Error <SYNC>

·SYNC L-L

·SYNC

BLC

IRIS

WHITE BALANCE

AGC GAIN

GAMMA

SHUTTER

APERTURE

DAY/NIGHT

PRESET

MENU

L-L y

OFF

SET y

ATW

NORM

0.45

60

HIGH

AUTO y

OFF

BACK

SET

R

Lamp

■ INT

Internally synchronized

• Lamp turned on.

■ L-L (Line-Lock)

Synchronizes the unit with power frequency

• Lamp blinking.

L-L SETTING

· 250

For accessing the main menu, see pages 7 – 8.

L5BL2_BM2_US_XE(GB).book 15 ページ２００６年６月１４日　水曜日　午後１２時５６分

16

Setting Camera Performance <CAMERA>

If the images of subjects are not clear because of backlight, compensate for it by

adjusting conditions or changing the compensation method.

1

Select <BLC> and specify the compensation

method.

■ If you want to return to the previous screen

Select <MENU> – “BACK” and press the SET button.

■ If you want to close the settings screen

Set <MENU> to “END” and press the SET button.

Backlight Compensation <BLC>

SYNC

·BLC

IRIS

WHITE BALANCE

AGC GAIN

GAMMA

SHUTTER

APERTURE

DAY/NIGHT

PRESET

MENU

INT

OFF

SET y

ATW

NORM

0.45

60

HIGH

AUTO y

OFF

BACK

·BLC

■ CENT (Center zone metering)

Compensation is made based on the optical measurement that is

focused on the central area of the screen (the image of subject to

be compensated is located in the center of the screen).

■ MULT1 (Multi-spot metering, Normal mode)

Compensation is made based on the optical measurement and

assessment of the entire screen (the image of subject to be

compensated is not limited to a center of the screen location).

■ MULT2 (Multi-spot metering, High mode)

Compared to MULT1, faster backlight compensation is possible

against a lesser amount of light.

■ OFF

No compensation is performed for backlight.

For accessing the main menu, see pages 7 – 8.

L5BL2_BM2_US_XE(GB).book 16 ページ２００６年６月１４日　水曜日　午後１２時５６分

17

Setting Camera Performance <CAMERA>

If you need to adjust the brightness, follow the steps below.

1

Select <IRIS> and press the SET button.

RThe “IRIS SETTING” screen appears.

2

Adjust the brightness (iris) (0 – 100).

• The greater the number, the brighter it gets.

3

Select <MENU> – “BACK” and press the SET

button.

RReturns to the camera performance screen.

• If you want to close the settings screen, set to “END” and press

the SET button.

Adjusting Iris Level <IRIS>

·IRIS

SYNC

BLC

·IRIS

WHITE BALANCE

AGC GAIN

GAMMA

SHUTTER

APERTURE

DAY/NIGHT

PRESET

MENU

INT

OFF

SET y

ATW

NORM

0.45

60

HIGH

AUTO y

OFF

BACK

SET

R

IRIS SETTING

<LEVEL>

· 20

PRESET

MENU

OFF

BACK

Note:

• Under extremely bright lighting, unfavorable phenomena may

occur such as swaths of smear on the screen, because light

intensity entering the lens is too high to be controlled. Reduce the

intensity by changing the angle of the lighting source or by other

means.

• If the images of subjects under fluorescent lighting are flickering,

replace fluorescent lighting with incandescent lighting.

For accessing the main menu, see pages 7 – 8.

L5BL2_BM2_US_XE(GB).book 17 ページ２００６年６月１４日　水曜日　午後１２時５６分

18

Setting Camera Performance <CAMERA>

With its default Auto-Tracing White Balance (ATW) setting, this unit is able to obtain natural colors even when the light source

is changed. However, you may manually change the white balance settings or its mode to obtain better tone, especially when

the screen color does not match actual objects.

1

Select <WHITE BALANCE> and specify a mode.

2

For advanced settings (AWC or MWB), press the

SET button.

REach corresponding settings screen will appear.

• Advances to A on next page when selecting “AWC”.

Advances to B on page 20 when selecting “MWB”.

■ If you want to return to the previous screen

Select <MENU> – “BACK” and press the SET button.

■ If you want to close the settings screen

Set <MENU> to “END” and press the SET button.

Setting White Balance <WHITE BALANCE>

SYNC

BLC

IRIS

·WHITE BALANCE

AGC GAIN

GAMMA

SHUTTER

APERTURE

DAY/NIGHT

PRESET

MENU

INT

OFF

SET y

ATW

NORM

0.45

60

HIGH

AUTO y

OFF

BACK

·WHITE

BALANCE

■ ATW (Auto-Tracing White Balance)

Automatic setting for white balance.

■ AWC (One-Push Adjustment): (see next page)

Adjusts white balance by shooting white paper or wall.

■ 3200 (Halogen light or incandescent lamp, etc.)

(fixed)

Targeted at around 3200 K of color temperature.

■ 5600 (Daytime sunlight) (fixed)

Targeted at around 5600 K of color temperature.

■ FLUO (Fluorescent lamp) (fixed)

Targeted at around 4200 K of color temperature.

■ MWB (Manual White Balance): (see page 20)

Fine-adjusts red and blue manually.

For accessing the main menu, see pages 7 – 8.

L5BL2_BM2_US_XE(GB).book 18 ページ２００６年６月１４日　水曜日　午後１２時５６分

19

Setting Camera Performance <CAMERA>

A One-Push Adjustment (AWC)

1

Select <AWC LOCK>.

2

Point a camera to a white paper or wall to project

an image on the whole screen, and press the SET

button.

RThe cursor “q” lights off, and white balance adjustment will

start. The adjustment will end after about 2 seconds when “q”

lights again.

• If the adjustment does not yield a satisfactory result, press the

SET button again.

■ To perform fine adjustment of color

In the “AWC SETTING” screen, select <GO TO MWB> – “SET”, and

press the SET button.

RThe “MWB SETTING” screen appears. Specify values manually

(see next page).

3

Select <MENU> – “BACK” and press the SET

button.

RReturns to the camera performance screen.

• If you want to close the settings screen, set to “END” and press

the SET button.

AWC SETTING

·AWC LOCK

GO TO MWB

SET

SET y

·AWC LOCK

SET

White paper or wall

MEMO: Transferring to the “MWB SETTING” screen through <GO

TO MWB>, white balance mode (see page 18) will be

changed to “MWB”.

L5BL2_BM2_US_XE(GB).book 19 ページ２００６年６月１４日　水曜日　午後１２時５６分

Page is loading ...

Sanyo VCC-P9575P User manual

This manual is also suitable for

Sanyo VCC-P9575P User manual

Related papers

Other documents