Grace Company Original TrueCut Rotary Cutter Operating instructions

Brand
Grace Company
Model
Original TrueCut Rotary Cutter
Type
Operating instructions
Accurate: The Ruler Guide interlocks with the edge of the
TrueCut Ruler (sold separately), leng you make straight,
precise cuts every me!
Easy: As you move the cuer eortlessly along the ruler’s
track, the guide keeps your cuer from veering away.
Safe: The Ruler Guide keeps your ngers safer by prevenng
accidental slips.
Rotary Cuer Instrucons
Using the Lock Buon: With the Lock Buon in the
normal posion, the Safety Shield is locked unl one or both of
the Release Buons is pressed. Press and hold one or both of the
Release buons to cut.
For convenience during long cung sessions, switch
the Lock Buon to the lock posion while holding one
or both of the Release Buons down. This will hold the
Release Buons down for you, freeing the Safety Shield and
leng you cut connuously without having to push any buons.
Remember to switch the Lock Buon back to the normal
posion for safety aer your cung session.
As an extra safety feature, you may switch the Lock Buon to
the lock posion with the Release Buons out. This prevents the
Release Buons from being pressed in, keeping the safety shield
always locked.
Tension Slider: This adjusts how much pressure it takes to cut
when using the Ruler Guide. Move the slider to the top for more
tension or to the boom for less tension (less tension is more
ideal for cung mulple layers of fabric).
RULER GUIDE
Safety Shield
Tension Slider
Lock Button
(Normal position)
Lock Button
(Lock position)
Release Buttons
Rotary Cuer Instrucons
Replacing the Blade: Unscrew the knobs on front and back. Remove the front knob and
washer from the front of the blade. Remove the back knob from the back. Remove the blade
and replace it with a new one. Slip the back knob back through the hole. Place the washer over
the blade and then the Front knob over the washer. Screw the knobs together unl snug but not
ght. Screwing the knobs too ght will result in the blade not turning when cung.
6 3634 31 7013 3
1-800-264-0644
www.graceframe.com
TrueCut and The Grace Company logo
are trademarks of The Grace Company.
©2009 The Grace Company.
Patent(s) Pending
MADE IN CHINA
Caution: contains sharp blade
  • Page 1 1
  • Page 2 2

Grace Company Original TrueCut Rotary Cutter Operating instructions

Brand
Grace Company
Model
Original TrueCut Rotary Cutter
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents