PrecisionPower Q-Bass Owner's manual

Brand
PrecisionPower
Model
Q-Bass
Type
Owner's manual
QBASS REMOTE
TM
INSTALLATION
Using the supplied bracket, firmly mount the
QBASS REMOTE
TM
boost control encoder within easy reach of the driver’s seat. Insert
one end of the 25 foot data cable into the back of the encoder and
route the cable to the amplifier to be controlled. A single
QBASS
REMOTE
TM
encoder can control multiple DCX amplifiers through the
RCA output option on the amplifier.
OPERATION
After you have mounted the remote boost control, it’s time to select
from one of four boost frequency centers - 30Hz, 36Hz, 44Hz, or
60Hz. Find the switches on the front endplate of your amplifier that
are labeled
QBASS
TM
1 and 2 and set them according to your
frequency choice using the chart below.
CAUTION: The
QBASS PLUS
TM
system should only be used in
systems with strong subwoofers. 18dB is a lot of bass boost and
could damage full range speakers.
See your DCX amplifier owner’s manual for more information about warranty of
Precision Power
products.
Precision Power
is a division of Directed Electronics,
Inc., One Viper Way, Vista, CA 92081. 1-800-62-POWER
QBASS
TM
Settings
1 2 Freq.
IN IN 30Hz
IN OUT 36Hz
OUT IN 44Hz
OUT OUT 60Hz
© 2004 Directed Electronics, Inc.Vista, CA G41825 01/04
  • Page 1 1

PrecisionPower Q-Bass Owner's manual

Brand
PrecisionPower
Model
Q-Bass
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents